Welcome
Thank you for purchasing the new Portable Wireless Speaker SY-X206BT. Please read this manual carefully before
operating your product and pay close attention to the precautions, which are mentioned below. Store this user
manual in a safe place for future reference
Function description
Functions
a. Press the M button to change mode
b. Press the + / - keys to go to the next track or previous track
c. Press and hold the + / - keys to increase or decrease the volume of the music.
d. To playback music, press the ▶ key once to play or pause the music; Press the ▶ button to answer and hang up
calls when in hands-free mode.
e. Slide the ON/OFF key to turn on/off the speaker
IPX5 Waterproof
This speaker is resistant to water splashes. However, do not place the speaker into any water container or in the
shower at any time. This will cause the speaker to malfunction.
Charging the speaker
a. Please fully charge the battery before using the device for the first time.
b. Connect the USB cable to the unit and the other end to PC in order to commence charging.
c. The Red LED will turn on indicating that the unit is now charging. Once the light goes off, this means that the unit
is completely charged and ready to use.
Bluetooth connection & hands free function for calling
a. Slide the button to the left to turn on the device. The LED indicator will turn on and a sound is heard confirming
the speaker is now in Bluetooth pairing mode.
b. Turn on the Bluetooth on your Smartphone or Tablet and search for the speaker. Once SY-X206BT appears on
your phone or tablet, click on it to pair your device with the speaker. The speaker will emit a sound, confirming
the paring process has been successfully established.
Note: In the case you are asked to enter a password, simply enter ‘0000’ and click ok.
c. Press the ▶ key once to play/pause the music.
d. Press the + / - keys for the next track or previous track.
e. Press and hold the + / - keys to adjust the music volume.
f. When there is an incoming phone call, short press the ▶ key to receive the call and the hands free function will
commence automatically. Short press the ▶ key to terminate the call. If music was playing before the phone call,
the device will automatically return to music playing mode after the call function has ended.
Note: Please remove the rubber protector at the back of the unit when using the hands-free function for a better
sound quality.
Bluetooth paring and connection
a. If the wireless speaker has been previously connected via Bluetooth to any device, it will connect with that
device automatically once it is turned on.
b. In the case the speaker has never been connected via Bluetooth before, the unit will enter into pairing mode.
Pair the speaker with your device. Search for SY-X206BT on the Bluetooth profile list.
c. Your speaker can only be connected to one device at a time.
d. At the same time your smartphone or tablet will not be able to connect to your speaker if it is already paired with
another device. You will need to un-pair your device in order to connect it to the speaker.
Aux in connection
a. Turn on the Bluetooth speaker, connect the audio cable with the aux-in port of the speaker and connect the
other end into the audio-out port of your external music device.
b. Press and hold the + / - keys to adjust the music volume accordingly.
Music playback from Micro SD card
a.
Turn on the power of the speaker and insert a Micro SD card. Make sure to insert the memory card carefully and
in the correct position. The music will start to play automatically.
b.
To playback your music, press the ▶ button to play/pause the music.
c.
Press the + / - keys for the next track or previous track.
d.
Press and hold the + / - keys to adjust the music volume.
Music playback from USB disk
a. Power on the speaker and insert the USB flash disk inside to play music. The music will start to play
automatically.
b. To playback your music, press the ▶ key to play/pause the music.
c. Press the + / - keys for the next track or previous track.
d. Press and hold the + / - keys to adjust the music volume.
FM mode
a. Power on the speaker and press the M key switch to FM mode, a sound will be heard.
b. Press the ▶ǁ key so that the unit can automatically search for FM channels and save them automatically. It
jumps to the first channel automatically when the search has ended.
c. Press the – key once to jump to the previous channel and + key once to jump to the next channel.
d. Press and hold the + / - keys to adjust the volume.
Product Specifications
Bluetooth version: V2.0
Support profiles: A2DP, AVRCP, HFP
Operating BT Frequency Range：2.4GHz-2.48GHz
Bluetooth transmission distance: 10meters
Audio formats supported: MP3/WMA
FM range: 87.5-108.0 MHz
Speaker driver: 40mm 4Ohm
Speaker output power: 5Watts
Frequency Response: 180Hz-16KHz
Signal-to-Noise Ratio: 85dB
Distortion: 0.5%
Working voltage： DC3.7V
Charging voltage：DC5V
Battery capacity：1200mAh
Playing time: 4 – 5 hours (Depending on volume level)
Charging time: 5 – 6 hours
Product size：125*61*39mm
Weight: 220g
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Portable Wireless Speaker
Sytech® SY-X206BT complies with the following directives:
EMC Standard: Directive 2014/30/EU
R&TTE Standard: Directive 2014/53/EU
Rohs Standard: 2011/65/EU Restriction of hazardous substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
/
