IPX5 Waterproof
This speaker is resistant to water splashes. However, do not place the speaker into any water container or in the
shower at any time. This will cause the speaker to malfunction.
Charging the speaker
a. Please fully charge the battery before using the device for the first time.
b. Connect the USB cable to the unit and the other end to PC in order to commence charging.
c. The Red LED will turn on indicating that the unit is now charging. Once the light goes off, this means that the unit
is completely charged and ready to use.
Bluetooth connection & hands free function for calling
a. Slide the button to the left to turn on the device. The LED indicator will turn on and a sound is heard confirming
the speaker is now in Bluetooth pairing mode.
b. Turn on the Bluetooth on your Smartphone or Tablet and search for the speaker. Once SY-X206BT appears on
your phone or tablet, click on it to pair your device with the speaker. The speaker will emit a sound, confirming
the paring process has been successfully established.
Note: In the case you are asked to enter a password, simply enter ‘0000’ and click ok.
c. Press the ▶ key once to play/pause the music.
d. Press the + / - keys for the next track or previous track.
e. Press and hold the + / - keys to adjust the music volume.
f. When there is an incoming phone call, short press the ▶ key to receive the call and the hands free function will
commence automatically. Short press the ▶ key to terminate the call. If music was playing before the phone call,
the device will automatically return to music playing mode after the call function has ended.
Note: Please remove the rubber protector at the back of the unit when using the hands-free function for a better
sound quality.
Bluetooth paring and connection
a. If the wireless speaker has been previously connected via Bluetooth to any device, it will connect with that
device automatically once it is turned on.
b. In the case the speaker has never been connected via Bluetooth before, the unit will enter into pairing mode.
Pair the speaker with your device. Search for SY-X206BT on the Bluetooth profile list.
c. Your speaker can only be connected to one device at a time.
d. At the same time your smartphone or tablet will not be able to connect to your speaker if it is already paired with
another device. You will need to un-pair your device in order to connect it to the speaker.
Aux in connection
a. Turn on the Bluetooth speaker, connect the audio cable with the aux-in port of the speaker and connect the
other end into the audio-out port of your external music device.
b. Press and hold the + / - keys to adjust the music volume accordingly.
Music playback from Micro SD card
a.
Turn on the power of the speaker and insert a Micro SD card. Make sure to insert the memory card carefully and
in the correct position. The music will start to play automatically.
b.
To playback your music, press the ▶ button to play/pause the music.
c.
Press the + / - keys for the next track or previous track.
d.
Press and hold the + / - keys to adjust the music volume.