Specifications
®
CRITICAL DIMENSIONS
(DO NOT SCALE)
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
DESCRIPTION
• Metal construction with chrome plated finish
• Pressure balancing cycle valve design with an
adjustable temperature limit stop
• 1/2" IPS connections
• Includes showerhead, arm, flange, and diverter tub spout
OPERATION
• Lever style handles (Chrome & Porcelain)
• LifeShine
®
polished brass accent or chrome accent
• Handle operates counterclockwise through a 270˚ arc
with off at 6 o'clock and maximum hot at the 9 o'clock
position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2˚
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to CSA B-125,
ASME A112.18.1M, ANSI A117.1 and all applicable
requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
7"
(178 mm)
ESC. DIAM.
3-1/2"
(90 mm)
2-1/4"
(57 mm)
6'-6"
(1981 mm)
Nomimal
C
L
Shower
45" (1143 mm)/
48" (1219 mm)
Tub/Shower &
Tub Only
32" (813 mm)
1-3/8"
(35 mm)
2-1/2" Max.
(63 mm)
1/2" (13 mm) Min. CC
5/8" (16 mm) Min. IPS
2" (51 mm) CC
1-7/8" (48 mm) IPS Max. Wall
Face of Stud
Finished Wall Line
Floor Line
3-1/2" (90 mm) Max.
2-1/4" (57mm) Min.
C
L
1-3/8"
(35 mm)
1-1/2" (38mm)
3/6" (typ) (5mm)
Plaster Ground
Floor Line
Plastic
Tub/Shower
Surround
Single-Handle Tub/Shower
Model: L82385
Rev. 7/04
ADA
ADA symbol applies to shower
valve control only.
THIN WALL APPLICATION
THICK WALL APPLICATION
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Moen S664NL Specification
-
-
-
Moen Villeta TL2302CP User manual
-
-
-
-
-
-