Hembry Creek SCMV170CBT Installation guide

Hembry Creek
Brand
Hembry Creek
Model
SCMV170CBT
Category
Equipment cleansing kit
Type
Installation guide

This manual is also suitable for

Hembry Creek SCMV170CBT is a stone vessel sink that can be installed above the counter. It does not have an overflow and may require a specific type of drain such as a pop-up, twist and turn, or a grid drain assembly. Before installing the sink, inspect it for damage and refer to local plumbing codes to determine the appropriate drain type. The sink should be secured to the countertop using a bead of silicone sealer, and the drain kit should be hand-tightened.

Hembry Creek SCMV170CBT is a stone vessel sink that can be installed above the counter. It does not have an overflow and may require a specific type of drain such as a pop-up, twist and turn, or a grid drain assembly. Before installing the sink, inspect it for damage and refer to local plumbing codes to determine the appropriate drain type. The sink should be secured to the countertop using a bead of silicone sealer, and the drain kit should be hand-tightened.

SUGGESTED TOOLS AND MATERIALS
Adjustable Wrench Channel Lock Tape Measure Safety Glasses
INSTALLATION INSTRUCTIONS
STONE
VESSEL SINK
(ALL MODELS)
10'
YOUR STONE VESSEL SINK
For customer support please call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
BEFORE YOU BEGIN
Observe all local plumbing and building codes.
Follow these instructions only if it apply to your installation. Vessel sinks allow you to be creative and flexible with your installation.
Before installation, remove your new stone sink and carefully inspect it for damage. Return the stone sink to its packaging until you are
ready to install it.
These instructions contain important care and cleaning instructions. Please review these instructions carefully.
All vessel sinks do not have an overflow and may require a specific type of drain such as a pop-up, twist and turn or a grid drain
assembly. Please check your local plumbing codes to determine which drain will meet local plumbing code standards for this product.
ABOVE COUNTER INSTALLATION
STEP 1:
Carefully, position the sink in the cutout opening.
STEP 2:
To secure the sink on the countertop, use a bead of silicone sealer.
Use moderate force and hand-tighten the drain kit to the sink.
STEP 3:
Install the faucet according to the manufacturer’s instructions /
manual.
STEP 4:
Our stone sinks are factory sealed with a penetrating sealer. We recommend
sealing your stone sink before it first use with a natural stone sealer. Refer to
the instructions on the stone sealer container for proper application.
CARE INSTRUCTIONS
To keep your new sink looking new, please follow these simple care instructions:
Routine cleaning of the stone sink will reduce the need for heavy cleaning and polishing.
Use a a soft cloth after each use to minimize soap scum.
Never use strong / abrasive cleaners. For general cleaning, use mild soap and water or natural stone cleaners. Do not use
abrasive detergents or cleaning pads, which can damage the surface of the stone.
Periodically, re-apply the natural stone sealer as warranted by use. Refer to the instructions on the stone sealer container
for proper application.
** NOTE: Sink style, shape, cutout on top, vanity may vary
from the picture above. Instructional purposes only.
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers
with this product. These products will stain the surfaces permanently.
TM
Vessel-Style Drain
(Sold-Separately)
Vessel Mounting Ring
(Sold-Separately)
CUT-OUT TEMPLATE
STONE
VESSEL SINK
(ALL MODELS)
For customer support please call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
LAVATORY O 1 3/4"
CUT ALONG THIS LINE
ABOVE-THE-COUNTER INSTALLATION
TM
  • Page 1 1
  • Page 2 2

Hembry Creek SCMV170CBT Installation guide

Hembry Creek
Brand
Hembry Creek
Model
SCMV170CBT
Category
Equipment cleansing kit
Type
Installation guide
This manual is also suitable for

Hembry Creek SCMV170CBT is a stone vessel sink that can be installed above the counter. It does not have an overflow and may require a specific type of drain such as a pop-up, twist and turn, or a grid drain assembly. Before installing the sink, inspect it for damage and refer to local plumbing codes to determine the appropriate drain type. The sink should be secured to the countertop using a bead of silicone sealer, and the drain kit should be hand-tightened.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents