7
The meat and fish box was designed specially to keep foods fresher longer, without altering nutritional
values or original freshness.
Do not store fruit or vegetables in this box, since the temperature may drop below 0°C, causing water
contained in the food to freeze.
Temperature adjustment
The temperature inside the meat and fish box is shown by the position of the arm on the door of the box,
and depends on the general temperature of the refrigerator compartment.
We recommend setting the temperature of the refrigerator compartment between +2° and +6°.
To work out if the temperature inside the Meat and Fish box is right, refer to the pictures below:
Important: when the function is activated and there are foodstuffs with a high water content,
condensation may form on shelves. In this case, disable the function temporarily.
Removing the Meat & Fish box:
To obtain more space inside the refrigerator, the Meat & Fish box can be
removed. In this case proceed as follows:
1. Remove the drawer from the compartment (Figure 1).
2. Remove the drawer lid by loosening the hooks on the bottom of the
lid (Figure 2).
To re-insert the Meat & Fish box, make sure the lid is re-attached
before inserting the drawer and reactivate the function.
3. Press and hold the "Meat & Fish box" button for three seconds until
the yellow LED goes out.
To optimize energy consumption, we recommend you disable the Meat &
Fish box and remove all related components (except for the Fruit and
Vegetable crisper lid).
IMPORTANT
If the control panel does not show the symbol (see Quick
Reference Guide), to guarantee correct appliance operation, adequate
food storage conditions and to optimize energy consumption, do not
remove the Meat and Fish box.
MEAT AND FISH BOX
(depending on model)
When the arm points to the left, you need to
raise the temperature in the refrigerator
compartment.
When the arm points in the middle, the
temperature is ok.
When the arm points to the right, you need
to lower the temperature in the refrigerator
compartment.
Fig. 1
Fig. 2
