Panasonic SAHE200E Owner's manual

Category
AV receivers
Type
Owner's manual

This manual is also suitable for

AV Control Receiver
Operating Instructions
Model No. SA-HE200
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please read
these instructions completely.
Please keep this manual for future reference.
Note:
“EB” on the packaging indicates the United Kingdom.
E EB
TV
MD
TUNER/BAND
TOP MENU
MENU
RECEIVER
TAPE CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
INPUT
SELECTOR
SUBWOOFER
ENTER
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
Table of contents
Caution for AC Mains Lead ...............................................2
Safety precautions
.....................................................................2
Supplied accessories
................................................................4
The remote control
....................................................................4
Troubleshooting guide
...........................................................23
Specifications
..........................................................Back cover
Maintenance
.............................................................Back cover
Equipment connections
4
Speaker connections
8
Settings
10
Step 1
Control guide
12
Before use
Reference
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
Step 2
Step 3
Step 4
Sound modes............................................................................16
Other functions
.........................................................................18
The radio
.....................................................................................19
RDS broadcasts ...............................................................20
Other settings
...........................................................................21
Timer function ..................................................................22
Making a recording
..................................................................22
The RESET function
................................................................22
Others
RQT6252-B
2
RQT6252
Fuse cover
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A
Figure B
Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the units service life.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock.
Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is
not covered in these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center.
Electric shock or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as stated
below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL OR
COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOFKEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Caution for AC Mains Lead
3
RQT6252
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
CAUTION!
¡DO NOT INSTALL, OR PLACE THIS UNIT, IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION VENTS.
¡DO NOT OBSTRUCT THE UNITS VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
¡DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH
AS LIGHTED CANDLES, ON THE UNIT.
¡DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
VAROITUS!
¡ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA
KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN
SULJETTUUN TILAAN, JOTTA TUULETUS ONNISTUISI.
VARMISTA, ETTÄ VERHO TAI MIKÄÄN MUU MATERIAALI
EI HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN
YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU- TAI
TULIPALOVAARA.
¡¡
ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA
SANOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI
MUULLA VASTAAVALLA ESINEELLÄ.
¡¡
ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA
AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE.
¡¡
HÄVITÄ PARISTOT LUONTOA
VAHINGOITTAMATTOMALLA TAVALLA.
SUOMI
VAROITUS:
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA
KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI
LAITETTA SAA ALTISTAA SATEELLE, KOSTEUDELLE,
VESIPISAROILLE TAI ROISKEELLE, EIKÄ NESTETTÄ
SISÄLTÄVIÄ ESINEITÄ, KUTEN ESIMERKIKSI
MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE.
ADVARSEL!
¡¡
APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET
INNEBYGGET KABINETT ELLER ET ANNET LUKKET
STED HVOR VENTILASJONSFORHOLDENE ER
UTILSTREKKELIGE. SØRG FOR AT GARDINER ELLER
LIGNENDE IKKE FORVERRER
VENTILASJONSFORHOLDENE, SÅ RISIKO FOR
ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV
OVERHETING UNNGÅS.
¡¡
APPARATETS VENTILASJONSÅPNINGER MÅ IKKE
DEKKES TIL MED AVISER, BORDDUKER, GARDINER OG
LIGNENDE.
¡¡
PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS,
OPPÅ APPARATET.
¡¡
BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR
MILJØET.
NORSK
ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT
ELLER SKADER PÅ PRODUKTET, MÅ DETTE APPARATET
IKKE UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER
ELLER VANNSPRUT. DET MÅ HELLER IKKE PLASSERES
GJENSTANDER FYLT MED VANN, SLIK SOM
BLOMSTERVASER, OPPÅ APPARATET.
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI
LEUDOSSA ILMASTOSSA.
DETTE APPARATET ER BEREGNET TIL BRUK UNDER
MODERATE KLIMAFORHOLD.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile
telephone.
CAUTION
Do not place anything on top of this unit or block the heat
radiation vents in any way. In particular, do not place tape decks
or CD/DVD players on this unit as heat radiated from it can
damage your software.
www.panasonic.co.uk (for UK customers only)
¡Order accessory and consumable items for your product
with ease and confidence by telephoning our
Customer Care Centre Mon-Friday 9:00am-5:30pm.
(Excluding public holidays.)
¡Or go on line through our Internet Accessory ordering
application.
¡Most major credit and debit cards accepted.
¡All enquiries transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
¡It couldnt be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic
PC software related products only.
For Republic of Ireland, please use the Customer Care
Centre number listed above for all enquiries.
For all other product related enquiries, please use the
Customer Care Centre numbers listed above.
For the United Kingdom and Republic of Ireland
4
RQT6252
Please check and identify the supplied accessories.
1 AM loop antenna set (N1DAEYA00006)
(AM loop antenna, antenna stand,
antenna wall bracket)
Use the numbers indicated in parentheses when asking for
replacement parts.
1 FM indoor antenna (RSA0007-L)
2 Batteries
1 Remote control (EUR7502XC0)
1
4
2
3
+
+
(R6, AA, UM-3)
¡Insert so the poles (+ and ) match those in the remote control.
¡Do not use rechargeable type batteries.
Use
Aim at the sensor, avoiding obstacles,
at a maximum range of 7 m directly in
front of the unit.
The remote control
Refer to the separate booklet, Remote
Control Operation Guide, for remote
control operation details.
Step
1
2 3 4
Stereo phono cable
Video connection cable
Optical fiber cable
Coaxial cable
You can change the input settings for the digital
input terminals if necessary.
For example, if you have a DVD player that only has a
coaxial output terminal, connect it to COAXIAL IN, then
change the DVD setting from OPT 2 to COAX.
As you connect the equipment, fill in the table and make
changes to the settings as necessary (
\
page 11).
White (L)
Red (R)
S-video connection cable
¡Do not bend optical fiber cables.
¡Turn off all components before making any connections.
¡Use digital connection to enjoy Dolby Digital or DTS and record
digital sources (
\
page 16 and 22).
¡Use analogue connection to enjoy sources that cannot be
decoded on this unit and record analogue sources (
\
pages 16
and 22).
Note
Batteries
Supplied accessories
How to open
TV
TUNER/BAND
TOP MENU
MENU
RECEIVER
TAPEMD CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
INPUT
SELECTOR
INPUT
SELECTOR
SUBWOOFER SUBWOOFER
ENTER
TV
TUNER/BAND
TOP MENU
MENU
RECEIVER
TAPEMD CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
ENTER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
ENHANCED
SURROUND
DOLBY
PROLOGIC 2
SFC
RE-MASTER
TESTNEO:6
10/-/--
INPUT MODE
DVD 6CH
TIMER
LEVELEFFECT
/ L
/ R
TONE
BALANCE
DIMMER
SETUPPAGE
AUDIO
GROUP
DVD
TV/AV
TV VOL
SOURCE DIRECT
To connect equipment, refer to the appropriate operating
instructions.
Peripheral equipment and cables sold separately unless
otherwise indicated.
CD
TV
DVD
DVR
MD/CD-R
COAX
OPT 1
OPT 2
OPT 3
OPT 4
Default settings Actual connectionsINPUT
TV
MD
TOP MENU
MENU
TUNER/BAND
RECEIVER
TAPE CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
INPUT
SELECTOR
SUBWOOFER
ENTER
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
7 m
30˚ 30˚
1 AC mains lead
For the United Kingdom
For the United Kingdom
(VJA0733)
For continental Europe
(RJA0019-2K)
1 Antenna plug adapter (K1YZ02000013)
FM
ANT
AM
ANT
LOOP
EXT
75
GND
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
SURROUND
BACK
SUBWOOFER
COAXIAL
IN
IN
IN
CENTER
SUBWOOFER SURROUND
FRONT
RR
LL
R
L
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
PRE OUT
IN
INOUTINOUT
TV
IN
REC
(OUT)
PLAY
(IN)
REC
(OUT)
PLAY
(IN)
IN
VCR1
DVR/VCR2
TV
MONITOR
OUT
INOUT IN
A
OR
B : 4-16 /EACH SPEAKER
A AND B : 8-16 /EACH SPEAKER
6-16 6-16
6-16 /EACH SPEAKER
SURROUND
BACK
CENTER
SURROUND
OUT
INOUT
DVD/DVD 6CH
S-VIDEO
VIDEO
L
R
PHONO
TAPE
CD
VCR1
DVR/VCR2
IN
OUT IN OUT IN
TV
MD/CD-R/RW
SPEAKERS
FRONT
B
R L
R L
R L
A
AC IN
5
RQT6252
Equipment connections
TV and DVD player
IN
IN
CENTER
SUBWOOFER SURROUND
FRONT
RR
LL
DVD/DVD 6CH
DVD player
VIDEO OUT
AUDIO OUT
(SURROUND L, R)
AUDIO OUT
(CENTER,
SUBWOOFER)
AUDIO OUT
(FRONT L, R)
Connect to FRONT L, R if your DVD player does
not have 6 channel output.
Note
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
COAXIAL
IN
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
DIGITAL AUDIO OUT
S-VIDEO OUT
Satellite receiver etc.
DIGITAL OUT
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
COAXIAL
IN
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
Video
There are two types of connections: S-VIDEO, and VIDEO
(composite). Video input can only be output again through the
same type of terminal.
S-VIDEO
Use this connection for better picture quality than with the
VIDEO terminals.
VIDEO
This is the most basic video connection.
TV or monitor
21-pin scart cable connection also possible.
VIDEO IN
VIDEO OUT
AUDIO OUT
S-VIDEO OUT
S-VIDEO IN
FM
ANT
AM
ANT
LOOP
EXT
75
GND
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
SURROUND
BACK
SUBWOOFER
COAXIAL
IN
IN
IN
CENTER
SUBWOOFER SURROUND
FRONT
RR
LL
R
L
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
PRE OUT
IN
INOUTINOUT
TV
IN
REC
(OUT)
PLAY
(IN)
REC
(OUT)
PLAY
(IN)
IN
VCR1
DVR/VCR2
TV
MONITOR
OUT
INOUT IN
A
OR
B : 4-16 /EACH SPEAKER
A AND B : 8-16 /EACH SPEAKER
6-16 6-16
6-16 /EACH SPEAKER
SURROUND
BACK
CENTER
SURROUND
OUT
INOUT
DVD/DVD 6CH
S-VIDEO
VIDEO
L
R
PHONO
TAPE
CD
VCR1
DVR/VCR2
IN
OUT IN OUT IN
TV
MD/CD-R/RW
SPEAKERS
FRONT
B
R L
R L
R L
A
AC IN
6
RQT6252
Equipment connections
Other audio visual equipment
DVR/VCR2
INOUT
INOUT
DVR/VCR2
OUT IN
DVD recorder
VIDEO IN
AUDIO IN
AUDIO OUT
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
COAXIAL
IN
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
DIGITAL AUDIO OUT
VIDEO OUT
S-VIDEO OUT
S-VIDEO IN
IN
CD
CD Player
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
COAXIAL
IN
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
DIGITAL OUT
LINE
OUT
REC
(OUT)
PLAY
(IN)
MD/CD-R/RW
MD deck or
CD recorder
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
COAXIAL
IN
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
DIGITAL
OUT
PLAY
(OUT)
REC
(IN)
DIGITAL
IN
REC
(OUT)
PLAY
(IN)
TAPE
PLAY
(OUT)
REC
(IN)
If you have a graphic equalizer,
connect it to the TAPE terminals.
Tape deck
GND
IN
L
R
PHONO
PHONO
OUT
GND
Turntable
Connect if your turntable
has a ground terminal.
INOUT
VCR1
INOUT
S-VIDEO
VIDEO
VCR1
OUT IN
VCR
VIDEO IN
AUDIO IN
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
S-VIDEO IN
21-pin scart cable
connection also possible.
GND
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
SURROUND
BACK
SUBWOOFER
COAXIAL
IN
IN IN
Y
P
B
PR
R
L
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
PRE OUT
TV
IN
REC
(OUT)
PLAY
(IN)
REC
(OUT)
DVD
L
R
PHONO
TAPE
FM
ANT
AM
ANT
LOOP
EXT
75
5–12 m
7
RQT6252
FM
ANT
AM
ANT
LOOP
EXT
75
GND
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
SURROUND
BACK
SUBWOOFER
COAXIAL
IN
IN
IN
CENTER
SUBWOOFER SURROUND
FRONT
RR
LL
R
L
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
PRE OUT
IN
INOUTINOUT
TV
IN
REC
(OUT)
PLAY
(IN)
REC
(OUT)
PLAY
(IN)
IN
VCR1
DVR/VCR2
TV
MONITOR
OUT
INOUT IN
A
OR
B : 4-16 /EACH SPEAKER
A AND B : 8-16 /EACH SPEAKER
6-16 6-16
6-16 /EACH SPEAKER
SURROUND
BACK
CENTER
SURROUND
OUT
INOUT
DVD/DVD 6CH
S-VIDEO
VIDEO
L
R
PHONO
TAPE
CD
VCR1
DVR/VCR2
IN
OUT IN OUT IN
TV
MD/CD-R/RW
SPEAKERS
FRONT
B
R L
R L
R L
A
AC IN
Antennas
The included AC mains lead is for use with
this unit only. Do not use it with other
equipment.
Note
To household mains socket
Connect this lead after
all other cables and
cords are connected.
AC mains lead (included)
Connecting the AC mains lead cord and other information
Fix the other end of the
antenna where reception
is best.
Adhesive tape
FM indoor antenna (included)
AM loop antenna
(included)
FM
ANT
AM
ANT
LOOP
EXT
75
Keep the antenna cord away from tape decks, MD decks,
DVD players, and other cords.
Cooling fan
Operates at high power output levels only.
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
FM outdoor antenna
¡Disconnect the FM indoor antenna.
¡The antenna should be installed by a
competent technician.
AM outdoor antenna
¡Run a piece of vinyl wire horizontally across a window or other
convenient location.
¡Leave the loop antenna connected.
¡Disconnect the antenna when the unit is not in use. Do not use
the antenna during an electrical storm.
FM outdoor
antenna
75 coaxial cable
Vinyl-covered wire
AM loop antenna
(included)
Using the stand
Attach to the stand and place on a flat surface.
Screw
Wall bracket
(included)
When attaching the AM loop antenna to another
surface
AM antenna stand (included)
(For the United Kingdom)
Antenna plug
(included)
(FOR THE UNITED KINGDOM ONLY)
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
Insertion of connector
Even when the connector is perfectly
inserted, depending on the type of inlet
used, the front part of the connector may
jut out as shown in the drawing .
However there is no problem using the
unit.
Connector
Approx. 6 mm
Appliance inlet
INPUT
FM
ANT
AM
ANT
L
O
O
P
EXT
75
G
ND
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
SURROUND
BACK
SUBWOOFER
COAXIAL
IN
IN
IN
CENTER
SUBWOOFER SURROUND
FRONT
RR
LL
R
L
OPTICAL
OUT
OPTICAL4
(CD-R/RW) IN
PRE OUT
IN
INOUTINOUT
TV
IN
REC
(OUT)
PLAY
(IN)
REC
(OUT)
PLAY
(IN)
IN
VCR1
DVR/VCR2
TV
MONITOR
OUT
INOUT IN
A
OR
B : 4-16 /EACH SPEAKER
A AND B : 8-16 /EACH SPEAKER
6-16 6-16
6-16 /EACH SPEAKER
SURROUND
BACK
CENTER
SURROUND
OUT
INOUT
DVD/DVD 6CH
S-VIDEO
VIDEO
L
R
PHONO
TAPE /M D
CD
VCR1
DVR/VCR2
IN
OUT IN OUT IN
TV
CD-R/RW
SPEAKERS
FRONT
B
R L
R L
R L
A
AC IN
30˚ 30˚
45˚ 45˚
45˚ 45˚
YES NO
8
RQT6252
Speaker connections
Step
1
2
3 4
Placement of speakers
Front speakers ( left right)
Place on the left and right of the TV at seated ear height so
that there is good coherency between the picture and
sound.
Center speaker ( )
Place underneath or above the center of the TV. Aim the
speaker at the seating area.
Surround speakers ( left right)
Place on the side of or slightly behind the seating area,
about one meter higher than ear level.
Surround back speaker ( )
Place behind the seating area (slightly to the left and right
if you connect two), about one meter higher than ear level.
Subwoofer ( )
The subwoofer can be placed in any position as long as it
is at a reasonable distance from the TV.
Note that some experimentation can yield the smoothest
low frequency performance. Placement near a corner can
increase the apparent output level, but can result in
unnatural bass.
Do not short circuit.
Speaker cable
Cable Speaker terminals
Twist the wire
Note
SPEAKERS DISTANCE
SMALL LARGE
(3.0) m
NONE SMALL LARGE
FRONT
CENTER
SURROUND
SUR BACK
(SURROUND BACK)
SUB-WFR
(SUBWOOFER)
NONE SMALL
LARGE
NONE SINGLE DUAL
(3.0) m
(1.5) m
(1.5) m
Change the speaker settings.
To get the best performance from this unit and the speakers you connect to it, you need to change the settings described
below. As you connect the speakers, circle the corresponding SPEAKERS and fill in the approximate DISTANCE from the
seating area. Now go to page 10 and change the settings as necessary.
The front, center, and surround speakers should be
placed at approximately the same distance from the
seating area. The angles in the diagram are
approximate.
SPEAKERS
Change to suit the size and number of speakers you connect.
LARGE: For speakers that can reproduce a full sound range,
particularly the bass range below 100 Hz.
SMALL: For speakers that cannot adequately reproduce the
bass range. This setting is sufficient for most speakers
if you are using a subwoofer.
SUB-WFR is set to YES if you select this setting for
FRONT.
NONE: For speakers you havent connected (center, surround
or surround back). You cannot change the SUR BACK
setting if you select this setting for SURROUND.
SINGLE: If you connect one surround back speaker to the
speaker terminal.
DUAL: If you connect two surround back speakers via a power
amplifier to the pre-out terminal.
YES: If you connect a subwoofer.
NO: If you do not connect a subwoofer.
FRONT is set to LARGE if you select this setting.
DISTANCE
Change so the sound from the speakers reaches you at the
same time.
SLSR
SB
C
FL
FR
SW
FL
SW
SB
SL SR
C
FR
FL FR
C
SL SR
SB
SW
¡Factory settings for SPEAKERS are underlined.
¡Factory settings for DISTANCE are shown in parentheses.
FM
ANT
AM
ANT
LOOP
EXT
75
GND
DIGITAL
OPTICAL1
(TV) IN
OPTICAL2
(DVD) IN
OPTICAL3
(DVR) IN
SURROUND
BACK
SUBWOOFER
COAXIAL
IN
IN
IN
CENTER
SUBWOOFER SURROUND
FRONT
RR
LL
R
L
OPTICAL
OUT
OPTICAL4
(MD/CD-R/RW) IN
PRE OUT
IN
INOUTINOUT
TV
IN
REC
(OUT)
PLAY
(IN)
REC
(OUT)
PLAY
(IN)
IN
VCR1
DVR/VCR2
TV
MONITOR
OUT
INOUT IN
A
OR
B : 4-16 /EACH SPEAKER
A AND B : 8-16 /EACH SPEAKER
6-16 6-16
6-16 /EACH SPEAKER
SURROUND
BACK
CENTER
SURROUND
OUT
INOUT
DVD/DVD 6CH
S-VIDEO
VIDEO
L
R
PHONO
TAPE
CD
VCR1
DVR/VCR2
IN
OUT IN OUT IN
TV
MD/CD-R/RW
SPEAKERS
FRONT
B
R L
R L
R L
A
AC IN
A
OR
B : 4-16 /EACH SPEAKER
A AND B : 8-16 /EACH SPEAKER
FRONT
B
R L R L
A
INPUT
SURROUND
BACK
SUBWOOFER
R
L
PRE OUT
SURROUND
BACK
SUBWOOFER
R
L
PRE OUT
6-16
6-16 /EACH SPEAKER
SURROUND
BACK
SURROUND
R L
6-16
CENTER
9
RQT6252
Peripheral equipment and cables sold separately unless otherwise indicated.
Connecting speakers
Monaural
connection cable
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
To connect two surround
back speakers
Power amplifier
Other connections are possible depending on your speaker system.
See your speaker systems operating instructions for details.
Speaker
cable
Active
subwoofer
Subwoofer
Center speaker
Impedance: 616
Front speakers
Impedance:
A or B 416
If you connect speakers with an
impedance under 6 , switch on
LOW IMP (
\
page 12).
A and B 816
Surround back speakers
Impedance: 616
Surround speakers
Impedance: 616
Right Left
Speaker cables
Right Left
Turn off the receiver before connecting the speakers.
B terminals
For connection to a second pair of
speakers.
Use the A terminals to enjoy
SURROUND, SFC and DVD 6CH INPUT.
Speaker
cable
Speaker
cables
Stereo
phono
cable
FL
FR
C
SLSRSB
SW
OR
10
RQT6252
Settings
SPEAKERS DISTANCE
Change to suit the size and
number of speakers you
connect
Change the settings based on the
table you completed on page 8.
The factory settings are:
FRONT: LARGE
CENTER: SMALL
SURROUND: SMALL
SUR BACK: SINGLE
SUB-WFR: YES
Enter the distance of the front,
center and surround speakers
from the seating position
Change the settings based on the
table you completed on page 8.
You can select distances between
1.0 and 10.0 m at 0.1-meter intervals.
The factory settings are:
FRONT: 3.0 m
CENTER: 3.0 m
SURROUND: 1.5 m
SUR BACK: 1.5 m
1 2
Step
1 2
3
4
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
DISPLAY
8
INPUT SELECTOR
A SPEAKERS B
Press and
hold at the
same time
Enter the setting mode.
Select. Select.
Select. Select.
Change. Change.
Exit the setting mode.
INPUT
SELECTOR
SUBWOOFER
TV
TUNER/BAND
TOP MENU
MENU
RECEIVER
TAPEMD CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
ENTER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
ENHANCED
SURROUND
DOLBY
PROLOGIC 2
SFC
RE-MASTER
TESTNEO:6
10/-/--
INPUT MODE
DVD 6CH
TIMER
LEVELEFFECT
/ L
/ R
TONE
BALANCE
DIMMER
SETUPPAG E
AUDIO
GROUP
DVD
TV/AV
TV VOL
SOURCE DIRECT
TEST
LEVEL
/ L
/ R
VOLUME
A SPEAKERS B
8
A SPEAKERS B
A SPEAKERS B
INPUT SELECTOR
A SPEAKERS B
Repeat.
Repeat.
FRONT, CENTER, SURROUND
SUR BACK, SUB-WFR
NONE, SMALL, LARGE
SINGLE, DUAL
NO, YES
FRONT, CENTER,
SURROUND, SUR BACK
1.0 m
10.0 m
See page 21 to change the DIMMER, DR COMP and A/D ATT
settings.
Press and
hold at the
same time
11
RQT6252
Change the settings to suit your speakers and units to the environment in which you are using them. Before making any changes, read the
descriptions of the settings, note the factory settings and ranges, and refer to the equipments instructions.
FILTER
Change the cut-off for bass
output from the front speakers
If you set the front speakers to
SMALL, the filter is set to 100 Hz.
Raise the cut-off if the bass from the
front speakers is unsatisfactory so
that this bass is output through the
subwoofer.
You can raise the cut-off from 100 Hz
to either 150 Hz or 200 Hz.
Adjusting speaker output level
Adjust the level of the other speakers based on the output of the
front speakers. (Speakers set as NONE or NO are skipped.
Adjust the volume of the front speakers with [VOLUME].)
C (center), SR (surround right), SB (surround back)(SBR
surround back right and SBLsurround back left when DUAL
selected), and SL (surround left) can be adjusted between 10 dB
and +10 dB, with 0 being the level of the front speakers.
Adjust center, surround and surround back output to the same
apparent level of the front speakers.
For SW (subwoofer), you can select --- so there is no output,
MIN for minimum output, a level between 1 and 19, or MAX for
maximum output.
Adjust subwoofer output so it is balanced with the front speakers.
Subwoofer output is easily influenced by the source. You can also
change its level while playing something for better effect
(
\
page 15).
Preparation: Turn SPEAKERS A on.
3 5
D-INPUT
Digital input
Change the settings based on the
table you completed on page 4 so that
the correct source is selected when
you turn [INPUT SELECTOR].
The factory settings are:
TV: OPT 1
DVD: OPT 2
DVR: OPT 3
MD/CD-R: OPT 4
CD: COAX
4
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
Select. Select.
Select.
Change. Change.
Output the signal.
Adjust the main volume.
Select the speaker channel.
Stop the test signal.
Adjust the level.
The SURROUND DSP mode is engaged.
TEST
VOLUME
LEVEL
/ L
/ R
TEST
Repeat.
Repeat.
100, 150, 200
OPT 1, OPT 2, OPT 3,
OPT 4, COAX
TV, DVD, DVR,
MD/CD-R, CD
LCRSRSBSLSW
L C R SR SBR SLSBL SW
SINGLE
DUAL
C, SR, SB (SBR, SBL), SL, SW
Two seconds each.
12
RQT6252
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
MULTI DECO
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
INPUT
MODE
TA PE
MONITOR
DVD
6CH INPUT
Standby/on switch [8]
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
[SPEAKERS, A, B]
For selecting speakers A or B.
Turning the speakers off automatically engages the STEREO
mode (when listening through headphones, for example).
If your speakers have an impedance under 6
Press and hold [A] or [B] until LOW IMP lights up on the display.
Note that when LOW IMP is on, SPEAKERS A and B cannot be
used at the same time.
[DVD 6CH INPUT]
For switching between 6-channel and 2-channel DVD input.
When you select DVD 6CH, SOURCE DIRECT mode is on.
[PHONES]
Headphone jack
Plug type: 6.3 mm stereo
Avoid listening for prolonged periods of time to prevent hearing
damage.
Turn the speakers off when using the headphones.
[DSP SOUND MODE]
For selecting STEREO, SURROUND or SFC.
[DOLBY PRO LOGIC
22
]
For selecting a Dolby Pro Logic 2 mode: MOVIE, MUSIC or PANORAMA.
Use when DOLBY PRO LOGIC 2 lights in the SURROUND mode.
[NEO:6]
For selecting a DTS NEO:6 mode: CINEMA or MUSIC.
Use when NEO:6 lights in the ENHANCED SURROUND mode.
[ENHANCED SURROUND]
For turning on the enhanced surround mode. The indicator lights
when the mode is on.
Switch on.
8
Turn
SPEAKERS A
on.
Select input.
1
2
3
[HQ SOUND MODE]
For selecting the HQ sound mode. The indicator lights when the
mode is on.
[RE-MASTER]
For selecting a re-master mode. The indicator lights while a re-
master mode is on.
[SOURCE DIRECT]
For selecting a source direct mode.
Standby indicator [
^
]
When the unit is connected to the AC mains supply, this indicator
lights up in standby mode and goes out when the unit is turned on.
[WAKE]
Wake timer indicator
Remote control sensor
[INPUT MODE]
For selecting AUTO, ANALOG or DIGITAL.
Control guide
Step
1 2 3
4
Basic operations
A SPEAKERS B
INPUT SELECTOR
Main unit
13
RQT6252
S-ES DTS
DER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
Y
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
[VOLUME]
Volume control.
[MEMORY]
For presetting radio stations.
[INPUT SELECTOR]
For selecting input.
[TAPE MONITOR]
For monitoring sound when recording to a 3 head cassette deck.
Also used when you have connected a graphic equalizer to the
TAPE terminals.
[TUNING, 2, 1, PTY SELECTOR]
TUNING;
For tuning the radio and selecting preset stations.
Press and hold until the frequency starts scrolling to start
automatic tuning. Tuning stops when a station is found.
PTY SELECTOR;
For changing the PTY display.
[PRESET, PTY SEARCH]
PRESET;
Press to allow preset station selection with [TUNING, 2, 1]
PTY SEARCH;
For starting a PTY search.
[RDS]
Press to use the RDS functions.
[VCR 3]
For a video camera, etc.
[MULTI DECODER]
Light to indicate the sources input signal and decoding format
used.
DOLBY DIGITAL EX: Dolby Digital Surround EX sources
DOLBY DIGITAL: Dolby Digital sources
DOLBY PRO LOGIC
22
:
Dolby Pro Logic 2 decoder is being used
DTS-ES: DTS-ES discrete or matrix sources
DTS: DTS sources
NEO:6: DTS NEO:6 matrix decoder is being used
Select the DSP
sound mode.
Start play of the
source.
Adjust the
volume.
VOLUME
DOWN UP
5
4
6
DSP
SOUND MODE
[-BAND, FM MODE, DISPLAY MODE ]
-BAND, FM MODE;
For switching between AM and FM.
If reception is poor in FM, press and hold until MONO appears to
switch to monaural mode.
DISPLAY MODE;
For changing the RDS display mode: PS, PTY or RT.
Display (
\
page 14)
For your reference
¡When playing videotapes (connected to VCR 1)
The picture remains on the screen even if you select TAPE, CD,
MD/CD-R, TUNER or PHONO.
¡Once you have set a mode (DSP, AUTO/DIGITAL/ANALOG
input, or 2-channel/6-channel input) for an input source
That mode is engaged whenever you reselect the input source.
¡When using a graphic equalizer
Some distortion may occur, depending on the equalizers
settings.
¡When SPEAKERS B is on
The STEREO DSP SOUND mode is engaged automatically.
¡When you finish listening
Be sure to reduce the volume and press [8] to switch the unit
to standby.
¡When DTS FIX mode is on
You cannot use ENHANCED SURROUND and DTS-ES signals
will be played through 5.1 channels (i.e., there will be no sound
from the surround back speaker).
¡When input is DIGITAL
The tape monitor cannot be used.
(
\
pages 16 and 17)
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
TUNED
MONO
STEREO
PTY
PS RT
SLEEP
WAKE
LOW IMP
SPEAKERS
kHz
MHz
INPUT MODE
DIGITAL ANALOG
LCR
SL
S
TAPE MONITOR
SB SR LFE
DIRECT 12
SOUND MODE
STEREO
SURROUND
OVER FIXED PCM
DTS
SFC
M
A
B
ATT
RDS
14
RQT6252
[SOUND MODE, STEREO,
SURROUND, SFC]
Show the current DSP sound mode.
[kHz, MHz]
Frequency unit indicators
kHz: AM, or PCM sampling frequency
MHz: FM
[L, C, R, S, SL, SB, SR, LFE]
Program format indicators
Show the channels contained in the digital input
signal. They do not light when input is analogue.
L: Front left channel
C: Center channel
R: Front right channel
S: If the surround channel is monaural.
SL: Surround left channel
SB: Surround back channel
SR: Surround right channel
LFE (Low Frequency Effect): Deep-bass effect.
[LOW IMP, SPEAKERS , ]
Speaker indicators
LOW IMP:You have switched to LOW IMP because you have
connected speakers with an impedance under 6 .
SPEAKERS Å: Sound is output from speakers connected to
the front A, surround, and center terminals.
SPEAKERS ı: Sound is output only from speakers connected
to the front B terminals.
SPEAKERS Åı: Sound is output from speakers connected to
the front A and B terminals.
BA
[FIXED, PCM, DTS]
Light when a fix mode is selected.
FIXED PCM: PCM FIX mode
FIXED DTS: DTS FIX mode
[TUNED, STEREO,
MONO, ˜]
Radio indicators
TUNED: A station is tuned.
MONO: You have switched to
monaural mode with
[-BAND, FM MODE,
DISPLAY MODE] to
improve reception.
STEREO: A stereo FM broadcast
is tuned.
˜: Flashes during presetting.
General display
Shows the input mode, radio frequency, and
other general information.
[OVER]
Lights when input exceeds rated values.
Turn the A/D attenuator on if this occurs frequently (
\
page 21).
[ATT]
Lights when the A/D attenuator is working.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending.
DTS, DTS-ES Extended Surround and Neo:6 are
trademarks of Digital Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
Control guide
[WAKE, SLEEP]
Wake/sleep timer indicators.
[ , PS RT, PTY]
Show the current RDS display mode.
RDS
[TAPE MONITOR]
Lights when the tape monitor is on.
[DIRECT 1 2]
Lights when source direct mode is selected.
[INPUT MODE, DIGITAL, ANALOG]
Input indicators
Display
15
RQT6252
INPUT
SELECTOR
SUBWOOFER
TV
TOP MENU
MENU
TUNER/BAND
RECEIVER
TAPEMD CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
ENTER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
ENHANCED
SURROUND
DOLBY
PROLOGIC 2
SFC
RE-MASTER
TESTNEO:6
10/-/--
INPUT MODE
DVD 6CH
TIMER
LEVELEFFECT
/ L
/ R
TONE
BALANCE
DIMMER
SETUPPAGEAUDIO GROUP
DVD
TV/AV
TV VOL
SOURCE DIRECT
[SUBWOOFER]
For selecting subwoofer level.
Adjust the level in 5 steps
SW MIN, SW 5, SW 10, SW 15, and SW
MAX.
Select SW --- to stop output.
[/L, +/R]
First select EFFECT, LEVEL, TONE or
BALANCE, then press [/L] or [+/R] to
adjust.
[EFFECT]
Use when adjusting Dolby Pro Logic 2,
DTS NEO:6, or SFC effects
[LEVEL]
Use when adjusting speaker level.
[TONE]
To adjust the bass and treble.
[BALANCE]
To adjust the front speaker balance.
[^]
Standby/on button
[TV, VCR, DVD,
TUNER/BAND RECEIVER, MD,
TAPE, CD]
Input mode and remote control mode
buttons.
These buttons light when you press other
buttons to indicate the current remote control
mode.
[VOLUME, +, ]
To adjust the volume.
[TIMER]
For setting the wake/sleep timer.
[MUTING]
To mute the volume.
[INPUT SELECTOR]
To select input source.
[SOUND MODE]
For selecting STEREO, SURROUND or
SFC
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and channels.
[10/-/--]
To enter two digit channels.
[ENHANCED SURROUND]
For turning on the enhanced surround mode.
[RE-MASTER]
For selecting a re-master mode.
[DOLBY PRO LOGIC
22
]
For selecting a Dolby Pro Logic 2 mode:
MOVIE, MUSIC or PANORAMA.
Use when DOLBY PRO LOGIC 2 lights in
the SURROUND mode.
[SFC]
For selecting SFC modes.
[NEO:6]
For selecting a DTS NEO:6 mode: CINEMA
or MUSIC.
Use when NEO:6 lights in the ENHANCED
SURROUND mode.
[TEST]
To start the speaker test signal.
[DIMMER]
For dimming the units display.
[SOURCE DIRECT]
For selecting a source direct mode.
[INPUT MODE]
For selecting AUTO, ANALOG or DIGITAL.
[DVD 6CH]
For switching between 6-channel and 2-
channel DVD input.
When you select DVD 6CH, SOURCE
DIRECT mode is on.
[DIRECT TUNING/DISC]
To enable selection of radio stations by
frequency.
[CHANNEL, 1, 2]
For selecting preset radio channels.
Buttons not explained on this page are used only to operate other equipment. Refer to
the separate Remote Control Operation Guide for details.
For your reference
¡When using the subwoofer
You cannot adjust subwoofer level while the SOURCE DIRECT
mode is on or if DVD 6CH INPUT is selected.
Sound can be distorted if you raise the volume while subwoofer
level is high. Reduce subwoofer level if this occurs.
¡When muting is on
Muting is also canceled when the unit is turned off.
Remote control
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
For your reference
In rare cases, the unit may have trouble recognizing the digital
signals on discs.
¡With the PCM signals on CDs, this may cause the beginning of a
track to be cut off. Engage the PCM FIX mode if this occurs.
¡With DTS, the signals may not be recognized at all. Engage the
DTS FIX mode if this occurs.
While the input source is selected:
11
Press [INPUT MODE] to select DIGITAL.
22
Press and hold [INPUT MODE].
The current mode is displayed. Press again to change the mode.
Each time you press the button:
AUTO / PCM FIX / DTS FIX
When a FIX mode is on, the unit cannot process other signals. This
may cause noise to be output. Select
AUTO
if this occurs.
The selected mode is stored for each input source even if the unit is
turned off.
16
RQT6252
Use this mode to play digital or analogue stereo sources or to
play surround sources through two speakers. When surround
sources are played in this mode, the sounds intended for the
other speaker channels are played through the front speakers.
Select this mode when you are playing a digital surround source
(Dolby Digital or DTS).
Also select this mode when playing analogue or digital stereo
sources. Dolby Pro Logic 2 decoder works not
only on sources recorded with Dolby Surround, but
also on any stereo source. The following modes
are available when using Dolby Pro Logic 2.
Enjoy an enhanced sound experience with greater presence and
spread by using these SFC (sound field control) modes with PCM
or analogue stereo sources.
The SFC modes cannot be used if the input signal
is Dolby Digital or DTS.
Choose from the following modes.
DOLBY
PRO LOGIC 2
SPEAKERS
INPUT MODE
DIGITAL
LR
SOUND MODE
STEREO
A
DSP
SOUND MODE
SPEAKERS
INPUT MODE
DIGITAL
LR
SOUND MODE
SFC
A
DSP
SOUND MODE
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
SOURCE DIRECT
INPUT
MODE
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
NEO:6
ENHANCED
SURROUND
INPUT
SELECTOR
SUBWOOFER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
ENHANCED
SURROUND
DOLBY
PROLOGIC 2
SFC
RE-MASTER
TESTNEO:6
10/-/--
INPUT MODE
DVD 6CH
TIMER
LEVELEFFECT
/ L
/ R
TONE
BALANCE
DIMMER
SETUPPAG EAUDIO GROUP
DVD
TV/AV
TV VOL
SOURCD DIRECT
LEVEL
/ L
/ R
SFC
EFFECT
SURROUND mode
STEREO mode
SFC modes
ENHANCED SURROUND mode
SPEAKERS
INPUT MODE
DIGITAL
LCR
SL
SR LFE
SOUND MODE
SURROUND
A
DSP
SOUND MODE
This mode uses the surround back speaker to create a realistic
sound field. It is especially effective when playing DTS-ES and
Dolby Digital Surround EX, but can be used with other DTS and
Dolby Digital sources. This mode engages automatically if the
disc has a recognition signal for DTS-ES or Dolby Digital
Surround EX (you can still turn the mode off).
Use DTS NEO:6 to play 5.1-channel DTS, 2-channel PCM, and
analogue sources through 6.1 channels.
The following modes are available when playing
2-channel PCM and analogue sources.
NEO:6
SFC
Notes on using the Digital Signal Processor
The digital signal processor in this unit can decode the
following signals:
¡¡
Dolby Digital, including Dolby Digital Surround EX
¡¡
DTS, including DTS-ES
¡¡
PCM, including PCM with sampling frequencies of 96 or
88.2 kHz
It cannot decode:
¡Other digital signals, such as MPEG
¡Dolby Digital RF signals from a laser disc player
When playing PCM with sampling frequencies of 96 or 88.2 kHz,
the STEREO DSP mode is engaged automatically.
Use this mode to enjoy pure sound from digital and analogue
sources, unaltered by this units DSP and other circuits.
Choose from the following modes.
SOUND MODE
STEREO
ANALOG
SPEAKERS
INPUT MODE
DIRECT 1
A
SOURCE DIRECT
SOURCE DIRECT modes
SOURCE DIRECT
Sound modes
SPEAKERS
INPUT MODE
DIGITAL
LCR
SL
SB SR LFE
SOUND MODE
SURROUND
A
ENHANCED
SURROUND
/
17
RQT6252
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
You can adjust the sound field by adjusting the level of the
speakers and the delay time of the surround speakers. These
adjustments can be made for each SFC mode.
To adjust the speaker level
11
Press [LEVEL] to select the speaker channel.
Each time you press the button:
C / SR / SL / SW
Sound does not come from the surround back speaker(s).
Speakers set as NONE or NO are skipped.
22
Press [/L] or [+/R] to adjust the level.
C, SR, and SL: 10 dB to +10 dB
SW: --- (off) ,/ MIN ,/ 1 19 ,/ MAX
To adjust the delay time
11
Press [EFFECT] .
22
Press [/L] or [+/R] to change the delay time.
Delay time can be set at 10-millisecond (ms) intervals between
10 and 100 ms.
The factory setting is 50 ms for each mode.
You can adjust the effect of MUSIC and PANORAMA with the
center width and dimension controls.
Center Width Control C-WDTH
This adjustment helps you realize a more natural sound image
when listening to music. Move sound out into the front speakers
to improve the overall front image, or add sound to the center
speaker to fix the center image.
You can choose a level between 0 (the center speaker is
dominant) and 7 (center sound is spread out).
The default level is 3.
11
Press [EFFECT] to select C-WDTH.
22
Press [/L] or [+/R] to adjust the effect.
Dimension Control DIMEN
You can make up for differences in the output level of the front
and surround speakers.
You can choose a level between 3 and +3 Increase the level
to move sound to the front speakers, decrease to move it to the
surround speakers.
The default is level 0.
11
Press [EFFECT] to select DIMEN.
22
Press [/L] or [+/R] to adjust the effect.
HALL
Imparts the reflection and spread of a large concert hall.
CLUB
Conveys the exciting and intimate atmosphere of a jazz club.
LIVE
Brings you up close for live stage performance and smoother
vocals.
THEATER
Recreates natural sound ambience and direction.
SIM SURR (Simulated Surround)
Heightens the sensation of expanded space with stereo sources,
and augments monaural sources.
PARTY
This mode uses the front and surround speakers so that sound is
in stereo regardless of the direction you are facing.
MOVIE
Use this mode when playing movie software, especially
videotapes, recorded in Dolby Surround.
MUSIC
Adds surround effects to stereo sources.
PANORAMA
Sound is spread out more so you feel like you are surrounded by
music.
CINEMA
Use this mode when playing movie software.
MUSIC
Adds surround effects to stereo sources.
You can adjust the effect of MUSIC with the center image control.
Center Image Control C-IMG
This adjustment helps you realize a more natural sound image
when listening to music. Move sound out into the front speakers
to improve the overall front image, or add sound to the center
speaker to fix the center image.
You can choose a level between 0 (the center speaker is
dominant) and 5 (center sound is spread out).
The default level is 3.
11
Press [EFFECT] to select C-IMG.
22
Press [/L] or [+/R] to adjust the effect.
Notes on using DTS NEO:6
You cannot select the above modes when the DTS indicator is lit.
Notes on using Dolby Pro Logic
22
ENHANCED SURROUND turns off if you select a Dolby Pro Logic
2 mode.
DIRECT 1
Enjoy pure stereo sound.
DIRECT 2
Further purifies sound by shutting off video signals, turning off the
display (unless input is TUNER), and turning on the HQ SOUND
MODE.
SOURCE DIRECT 1 or 2 turns off if you:
Select SURROUND mode,
Select ENHANCED SURROUND mode,
Select SFC modes, or
Select RE-MASTER modes,
While the SOURCE DIRECT 1 or 2 mode is selected, you cannot:
Adjust the tone, or
Use the subwoofer.
18
RQT6252
Other functions
Re-master
HQ sound mode
Input mode
Tone
Balance
Using 1/f algorithm technology, this original Panasonic feature
boosts the frequencies of the higher harmonics that are lost during
recording due to compression.
Press [RE-MASTER] to select EFFECT 1,
EFFECT 2, EFFECT 3 or EFFECT 4.
When Re-master is on, the current level appears, then each time
you press the button:
EFFECT 1: for fast tracks (pop and rock)
EFFECT 2: for tracks with a variety of tempos (jazz)
EFFECT 3: for slow tracks (classical)
EFFECT 4: for compressed audio signals
OFF: the re-master processing is off.
HQ sound mode uses a system that varies the actual gain of the
amplifier. This helps provide clear sound when listening at regular
volume levels.
Press [HQ SOUND MODE].
For your reference
You can only raise the volume to 10 dB when HQ sound mode is
on and the level is automatically lowered to this level if you turn HQ
sound mode on when the level is higher.
This unit automatically detects whether input is digital or analogue,
but you can fix the input mode.
Press [INPUT MODE] to select AUTO, ANALOG
or DIGITAL.
For your reference
¡When input is DIGITAL
The tape monitor cannot be used.
You can adjust the level of the bass and treble.
11
Press [TONE] to select BASS or TREBLE.
22
Press [/L] or [+/R] to adjust bass/treble.
For your reference
¡To adjust the tone
The STEREO DSP mode must be on and input must be either
analogue or PCM signals. You cannot adjust the tone while the
SOURCE DIRECT mode is on or if DVD 6CH INPUT is selected.
You can adjust the balance of the front speakers.
11
Press [BALANCE].
22
Press [/L] or [+/R] to adjust.
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
INPUT
MODE
RE-MASTER
HQ
SOUND MODE
INPUT
SELECTOR
SUBWOOFER
TV
TUNER/BAND
TOP MENU
MENU
RECEIVER
TAPEMD CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
ENTER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
ENHANCED
SURROUND
DOLBY
PROLOGIC 2
SFC
RE-MASTER
TESTNEO:6
10/-/--
INPUT MODE
DVD 6CH
TIMER
LEVELEFFECT
/ L
/ R
TONE
BALANCE
DIMMER
SETUPPAG EAUDIO GROUP
DVD
TV/AV
TV VOL
SOURCE DIRECT
/ L
/ R
BALANCE
RE-MASTER
INPUT MODE
TONE
19
RQT6252
Preset the stations one at a time.
11
Tune to the station.
22
Press [MEMORY].
33
Press [TUNING, 2, 1, PTY SELECTOR] to
select a channel.
44
Press [MEMORY].
11
Tune to FM 87.50 MHz.
22
Press and hold [MEMORY].
The FM stations the unit can receive are preset in channels 1 to 30.
33
Tune to AM 522 kHz.
44
Press and hold [MEMORY].
The AM stations the unit can receive are preset in channels 21 to 30.
(FM stations are replaced if any were preset in these channels.)
During automatic presetting, the memory indicator (˜) flashes and
the frequency scrolls. The memory indicator and channel numbers
are displayed for a second when a station is preset.
The last station to be preset is displayed when presetting finishes.
For your reference
Even if the mains lead is disconnected from the household mains
socket, the stations remain in memory for approximately one month.
11
Press [PRESET, PTY SEARCH].
The channel number flashes for about 5 seconds.
22
Press [TUNING, 2, 1, PTY SELECTOR].
Hold down the buttons to change channels faster.
On the remote control
Press [CHANNEL 1 or 2 ].
or
Press the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [10/-/--], then the two digits.
e.g. To select channel 21: [10/-/--] / [2] / [1]
The radio
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
Automatic presetting
Manual presetting
Selecting channels
Manual tuning
Direct tuning
You can tune radio stations manually by selecting the stations
frequency.
11
Turn [INPUT SELECTOR] to select TUNER.
22
Press [-BAND, FM MODE, DISPLAY MODE] to
select FM or AM.
33
Press [TUNING, 2, 1, PTY SELECTOR] to
select the frequency.
For your reference
Some equipment can interfere with radio reception. Turn off nearby
TV, VCR, DVD players, and satellite receivers or move them further
away from the antennas if this occurs.
qq
Press [TUNER/BAND RECEIVER].
The band changes each time you press the button.
ww
Press [DIRECT TUNING/DISC].
ee
Press the numbered buttons to enter the
frequency.
e.g. To select 107.90 MHz, press [1] / [0] / [7] / [9] / [0]
¡If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
¡If the frequency has not been input correctly, ERROR will be
displayed.
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
INPUT SELECTOR
RDS
- BAND
FM MODE
DISPLAY
MODE
MEMORY PRESET
PTY SEARCH PTY SELECTOR
2
TUNING
1
INPUT
SELECTOR
SUBWOOFER
TV
TUNER/BAND
TOP MENU
MENU
RECEIVER
TAPEMD CD
VCR
DVD
RETURN
PAUSESTOP
SOUND MODE
CHANNEL VOLUME
PLAY
SLOW /SEARCH
SKIP
DISPLAY
MUTING
ENTER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
ENHANCED
SURROUND
DOLBY
PROLOGIC 2
SFC
RE-MASTER
TESTNEO:6
10/-/--
INPUT MODE
DVD 6CH
TIMER
SOURCE DIRECT
LEVELEFFECT
/ L
/ R
TONE
BALANCE
DIMMER
SETUPPAG E
AUDIO
GROUP
DVD
TV/AV
TV VOL
CHANNEL
TUNER/BAND
RECEIVER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
10/-/--
20
RQT6252
RDS broadcasts
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
A SPEAKERS B
PHONES
RDS
- BAND
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
RDS
- BAND
FM MODE
DISPLAY
MODE
MEMORY PRESET
PTY SEARCH PTY SELECTOR
2
TUNING
1
RDS (Radio data system) is a multiplex broadcasting system to help
you enjoy radio more and tune into programs easier.
PS (Program service): Station name
PTY (Program type): Displays the program type, and is used to
search for a type of program from amongst
preset FM stations.
RT (Radio text): This unit can show up to 64 characters by scrolling
them across the display. The text could be about
the song, traffic and weather, phone in numbers, or
police information.
This unit does not have the emergency broadcast system (EBS)
that tunes automatically into emergency broadcasts.
Note
q Press [RDS].
w Press [-BAND, FM MODE, DISPLAY MODE].
The display changes each time you press the button:
To display RDS information
First, preset FM stations.
q Press [RDS].
w While RDSis flashing
Press [TUNING, 2, 1, PTY SELECTOR] to
select the program type.
The display changes each time you press the button.
e While the PTY display is flashing
Press [PRESET, PTY SEARCH].
The PTY indicator flashes while searching.
The unit switches to the station broadcasting the program.
The PTY indicator flashes for another two seconds.
¡SELECT PTY FIRST is displayed if you try to start without
selecting a program type.
PTY search
PTY display: NO PTY appears if PTY signals are not being
received.
Frequency display
PS display PTY display RT display
./
..
./ ./
... ,...
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M. O. R. M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
PTY displays
News
Current affairs
Information
Sport
Education
Drama
Culture
Science
Varied
Pop music
Rock music
Middle-of-the-road Music
Light classical
Serious classical
Other music
Weather information
Finance
Children
Social affairs
Religion
Phone in
Travel
Leisure
Jazz music
Country music
National music
Oldies
Folk music
Documentary
Test broadcast
Emergency announcement
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Panasonic SAHE200E Owner's manual

Category
AV receivers
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI