94
Advance planning for built-in bottom-freezer refrigerators
side; the door will swing right to left.
729Dia65
Standard Door Handle
Framed Panel
Standard
Door Handle
3/4" Overlay Panel
1/4" Thick Backer Panel
.10" Thick Spacer Panel
696Dia9
Customization basics: framed or overlay panels, custom handles
and accessory kits
Professional refrigerators
ZICP360NXLH, ZICP360NXRH
are shipped ready for installation.
European refrigerators
ZICS360NXLH, ZICS360NXRH
are shipped ready for installation.
Custom refrigerators
ZIC360NXLH, ZIC360NXRH
panels are required.
Framed panels
into the factory-installed trim.
Standard supplied handles shown in 1/4" panel position.
Standard supplied handles shown in 3/4" overlay
panel position.
Overlay panels
seamless appearance which integrates smoothly with
surrounding cabinetry.
Door handles
Side panels
Side panels must be used whenever the sides of the refrigerator
will be exposed.
Optional accessory kits
handle is 31" long.
unified custom grille panel to span the width of two units using
with the same door swing.
unified stainless steel grille panel to span the width of two units.
ZSAB1 kit
respond to your actions.
door swing
door swing