Hobart 55A-SHELFA Datasheet

Type
Datasheet

This manual is also suitable for

Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-40259 – W32 and W32C Hand-Wrap Stations Page 1 of 2
W32 AND W32C
HAND-WRAP STATIONS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
W32 AND W32C HAND-WRAP STATIONS
W32 HAND-WRAP STATION
W32 Hand-Wrap Station
STANDARD FEATURES
Easy to load lm
Low-temperature lm cut-off system
Stainless steel element
3-roll lm capacity – 8" to 18" wide; Top roll
limited to 14" wide
Fingertip lm selection
Maximum roll outside diameter 9
1
2"
3" ID core plugs standard
Rugged aluminum and stainless steel
construction
Adjustable height from 37" to 39
1
2"
Operates in all ambient temperatures
Used with Hobart Semi-Automatic CLA Systems
unless specied otherwise
Compact 12
1
2" deep x 25" wide design
MODEL
W32-6 Hand-Wrap Station
SPECIFICATIONS
CONSTRUCTION: Rugged aluminum frame and
roll core plugs with stainless steel wrapping surface
and roll shafts plated steel.
DIMENSIONS: 12
1
2 deep x 25" wide.
FILM HOLDERS: Three roll lm selector. 9.5"
capacity diameter x 18" maximum length (lower
two rolls), 14" maximum length upper roll.
ELECTRICAL: 100-120/60/1, input 1 amp.
SHIPPING WEIGHT: 50 lbs.
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 2 of 2 F-40259 – W32 and W32C Hand-Wrap Stations
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
W32 AND W32C
HAND-WRAP STATIONS
W32C HAND-WRAP STATION
STANDARD FEATURES
Easy to load lm
Low-temperature lm cut-off system
Stainless steel element
3-roll lm capacity – 8" to 18" wide; Top roll limited
to 14" wide
Fingertip lm selection
Maximum roll outside diameter 9
1
2"
3" ID core plugs standard
Rugged aluminum and stainless steel construction
Adjustable height from 37" to 39
1
2"
Operates in all ambient temperatures
Built-in hotplate
Deep 26" x 22
1
2" wide frame provides stability for
freestanding use
OPTIONS AT EXTRA COST
55A-SHELFA – Platter Shelf
69A-SHELF – Platter Shelf
MODEL
W32C-5 Hand-Wrap Station
SPECIFICATIONS
CONSTRUCTION: Rugged aluminum frame and roll
core plugs with stainless steel wrapping surface and
roll shafts plated steel.
DIMENSIONS: W32C – 26" deep x 22
1
2" wide.
OPTIONAL PLATTERS: 55A stainless steel platter
shelf w/aluminum mounting brackets. 22" L x 14" W.
10 lbs. shipping weight. 69Astainless steel platter
shelf w/aluminum mounting brackets. 14
1
2" x 24
1
2".
10 lbs. shipping weight.
HOTPLATE ON W32C: 8" x 15" teon coated
FILM HOLDERS: Three roll lm selector. 9.5"
capacity diameter x 18" maximum length (lower two
rolls), 14" maximum length upper roll.
ELECTRICAL: 100-120/60/1, input 11.3 amps, in-
cluding hot plate and lm cutting rod.
SHIPPING WEIGHTS: 60 lbs.; 55A – 10 lbs.; 69A
5 lbs.
F-40259 (03/09) LITHO IN U.S.A. (H-01)
W32C Wrap Station with two
optional 69A Platter Shelves
  • Page 1 1
  • Page 2 2

Hobart 55A-SHELFA Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI