522.010UK User Manual
Testing
• After installation, turn the LUX switch clockwise to the maximum setting
(SUN)
• Turn the TIME switch anti-clockwise to the minimum setting (-)
• For extra guidance please see picture.
• Turn on the power to test, if no light output
check settings after 30 seconds.
Note: When testing the sensor in daylight, please turn the ‘Lux’ switch to
(SUN) position, otherwise the sensor lamp could not work.
Specification
Power Source ……………………………………………….220-240Vac (50/60Hz)
Ambient Light …………………………………………… 3-2000 Lux (adjustable)
Time Delay Minimum ……………………………. 10 Seconds ± 3 Seconds
Time Delay Maximum ……………………………..… 5 Minutes ± 1 Minute
Rated Load …………………………………………………………………………. <60W
Detection Distance …………………………………..……… 6m MAX (<24°C)
Detection Range …………………………………………………………………. 360°
IP Rating …………………………………………………………………………….... IP20
Installation Height ……………………………………………………… 2m-3.5m
Errors and omissions excepted.
Copyright© 2019. AVSL Group Ltd.