MARTINDALE LOK6-200 Red Spot 200A/400A Fuse Carrier Service Lock User manual

MARTINDALE
Brand
MARTINDALE
Model
LOK6-200 Red Spot 200A/400A Fuse Carrier Service Lock
Type
User manual

This manual is also suitable for

MARTINDALE LOK6-200 Red Spot 200A/400A Fuse Carrier Service Lock is a device used for isolating Red Spot fuse holders with a rating of 200A or 400A. It is designed to prevent accidental access to live terminals and can be used in live working environments due to its insulating plastic construction without any metal parts. The device is easy to install and does not require any tools. It features a clamp system that accommodates wall thicknesses from 2mm to 5mm and an integral sliding cover to reduce accidental finger access.

MARTINDALE LOK6-200 Red Spot 200A/400A Fuse Carrier Service Lock is a device used for isolating Red Spot fuse holders with a rating of 200A or 400A. It is designed to prevent accidental access to live terminals and can be used in live working environments due to its insulating plastic construction without any metal parts. The device is easy to install and does not require any tools. It features a clamp system that accommodates wall thicknesses from 2mm to 5mm and an integral sliding cover to reduce accidental finger access.

LOK6 is a lock off device for individual Red Spot fuse holder bases
up to 100A and other similar designs following removal of the fuse
carrier. LOK6W has been designed to fit Henley and Lucy Service
Cut Outs and is also suitable for larger Red Spot holders rated at
63A and 100A. LOK6-200 is for Red Spot holders rated at 200A
and 400A.
Many Red Spot style fuse holders, still in widespread use today,
are made of brittle materials that can be fractured easily by the
sharp grub screw found in conventional MCB / Fuse lock-off devices.
The LOK6 Series uses an effective clamp system to grip the wall
of the fuse holder base without risk of damage. The clamp system
accommodates wall thicknesses from 2mm to 5mm with ease.
The device is clamped adjacent to the terminal at one end of the
fuse holder, rendering it safe against accidental finger access. For
added safety, the design includes an integral sliding cover which can
be adjusted according to the fuse size/rating to reduce accidental
finger access at the far end of the fuse holder base.
LOK6 SERIES
LOCK OFF DEVICES
InstructIon
Manual
Martindale Electric Company Limited
Metrohm House, 12 Imperial Park, Imperial Way, Watford, WD24 4PP, UK
Tel: +44 (0)1923 441717 Fax: +44 (0)1923 446900
E-mail: [email protected]
Website: www.martindale-electric.co.uk
© 2020 Martindale Electric Company Ltd.
Registered in England No. 3387451.
E. & O.E. LITLOK6 V5
Tighten toggle,
finger-tight ONLY.
DO NOT
OVERTIGHTEN.
Close toggle.
Check that the locking
off device is secure.
Fit padlock and tag
as desired.
LOK6 SERIES INSTALLATION GUIDE
BEFORE INSTALLATION, conduct a RISK ASSESSMENT. Wear
appropriate PPE. Remove the fuse carrier from the fuse holder
base.
Open toggle
and unscrew to
open inner jaw.
Place jaws centrally
over end wall of
fuse holder base.
Adjust sliding cover to
suit overall length of fuse
holder base.
Order codes:
MARLOK6
Lock off device for Red Spot style
fuse holder bases up to 100A.
MARLOK6-200
Lock off device for Red Spot style
fuse holder bases rated at 200A
& 400A.
Recommended accessories:
MARPAD21RD
Red Insulated body padlock with
insulated nylon shackle.
MARLOK6W
Lock off device for Henley and
Lucy Service Cut Outs and Red
Spot style fuse holder bases rated
at 63A & 100A.
MARTAG4
Danger warning tags (10 pcs)
All models are quick to install without the need for any tools. The
construction is all insulating plastic, without any metal parts, to
reduce the risk of use in live working environments.
Material is a tough flame-retardant blend of polycarbonate+ABS for
high impact strength and long term durability. Colour is bright yellow
for easy identification.
The LOK6 Series can take a wide range of locking padlocks with
shackles up to 7mm diameter. For added safety, Martindale Electric
recommends the insulated padlock PAD21RD.
The overall head height is low after installation, making it possible to
close most cabinet doors if desired.
Martindale Electric Company Limited
Metrohm House, 12 Imperial Park, Imperial Way, Watford, WD24 4PP, UK
Tel: +44 (0)1923 441717 Fax: +44 (0)1923 446900
E-mail: [email protected]
Website: www.martindale-electric.co.uk
© 2020 Martindale Electric Company Ltd.
Registered in England No. 3387451.
E. & O.E. LITLOK6 V5
  • Page 1 1
  • Page 2 2
  • Page 3 3

MARTINDALE LOK6-200 Red Spot 200A/400A Fuse Carrier Service Lock User manual

MARTINDALE
Brand
MARTINDALE
Model
LOK6-200 Red Spot 200A/400A Fuse Carrier Service Lock
Type
User manual
This manual is also suitable for

MARTINDALE LOK6-200 Red Spot 200A/400A Fuse Carrier Service Lock is a device used for isolating Red Spot fuse holders with a rating of 200A or 400A. It is designed to prevent accidental access to live terminals and can be used in live working environments due to its insulating plastic construction without any metal parts. The device is easy to install and does not require any tools. It features a clamp system that accommodates wall thicknesses from 2mm to 5mm and an integral sliding cover to reduce accidental finger access.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents