Eldes GSM gate controller 120 User guide

Page is loading ...

5EN | LT | RU | ES | DE

EN

1

Disable PIN code request.

2

Insert the SIM card into the device’s SIM card slot holder.

3

Power up the system and wait unil LED indicator SIM STAT lights up, indicaing

SIM card status. Once the indicator SIM STAT lights OFF, the illuminated

indicator NETW lights up, indicaing that the system has successfully

connected to the GSM/3G network.

4

Set the phone number for Admin 1 (NR 1); set date and ime; change the default

SMS password; you may also change the system’s language. Once the system

is conigured, it is ready to use.

5

Example of the system’s SMS response to the requested command.

LT

1

Išjunkite PIN kodo reikalavimą.

2

Įdėkite SIM kortelę į jai skirtą vietą įrenginyje.

3

Įjunkite sistemą ir laukite, kol SIM STAT indikatorius įsižiebs ir nurodys SIM

kortelės būseną. Kai ik SIM STAT nustos šviesi,šviečianis NETW indikatorius

patvirins, kad sistema yra sėkmingai prijungta prie GSM/3G inklo.

4

Įrašykite administratoriaus telefono numerį (NR 1); nustatykite datą ir laiką;

pakeiskite numatytąjį SMS slaptažodį; esant poreikiui pakeiskite sistemos

kalbą. Atlikus konigūraciją, sistema bus paruošta naudojimui.

5

Sistemos SMS atsakymo į užklausą pavyzdys.

RU

1

  PIN .

2

  PIN ,  SIM    

   .

3

      LED  SIM

STAT,    SIM .   

 SIM STAT,   NETW,   , 

    GSM/3G .

4

    ( 1); 

  ;   SMS   ; 

,   .    

   .

5

   SMS    .

Page is loading ...

8 EN | LT | RU | ES | DE

EN LT RU ES DE

Main Unit & Connectors

Pagrindinių mazgų ir gnybtų

paskiris

  

 

Unidad Principal &

Conectores

Haupteinheit & An-

schlüsse

Antenna SMA type connector

GSM/GPRS antenos SMA ipo

jungis

  SMA

  GSM/GPRS

Conector de antena ipo

SMA

SMA-Antennenanschluss

Mini USB port Mini USB jungis  Mini USB Puerto miniUSB Mini USB-Port

SIM card slot / holder SIM kortelės lizdas ir laikiklis

 /   SIM



Ranura/soporte para

tarjeta SIM

SIM-Kartenschlitz

ESIM120 -850/900/

1800/1900 MHz;

ESIM320- 850/900/

1800/1900/2100 MHz

ESIM120 -850/900/

1800/1900 MHz;

ESIM320- 850/900/

1800/1900/2100 MHz

ESIM120 -850/900/

1800/1900  ;

ESIM320- 850/900/

1800/1900/2100 

ESIM120 -850/900/

1800/1900 MHz;

ESIM320- 850/900/

1800/1900/2100 MHz

ESIM120 -850/900/

1800/1900 MHz;

ESIM320- 850/900/

1800/1900/2100 MHz

Red LED, indicaing SIM card

status

Raudonas LED indikatorius,

indikuojanis SIM kortelės būseną

 LED 

 SIM 

LED rojo, indica el estado

de la tarjeta SIM

Rote LED, zeigt den SIM-

Kartenstatus an

Green LED, indicaing signal

strength

Žalias LED indikatorius,

indikuojanis GSM signalo

siprumą

 LED 

 

LED verde, indica el nivel

de señal

Grüne LED, zeigt die

Signalstärke an

Pins for restoring default seings

Gamyklinės konigūracijos

atstatymo kontaktai

  



Pins para restablecer los

ajustes por defecto

Pins für die

Wiederherstellung der

Standardeinstellung

0.5A fuse 0.5A saugiklis 0.5A  Fusible 0.5A 0.5A Sicherung

AC/DC Power supply terminals Maiinimo kontaktai  

Terminales de la fuente de

alimentación

Stromanschluss

RELAY

12

Output C1-C2 terminal Išėjimo C1-C2 kontaktas   1-C2 Terminal de salida C1-C2 C1-C2 Ausgangsanschluss

COM Common terminal Bendras kontaktas   Terminal común Masseanschluss

Z1/Z3

Low-level (negaive input

terminal)

„Žemo lygio“ (neigiamas) įėjimo

kontaktas

  „“

 ( )

Nivel bajo (entrada de

terminal negaiva)

Low Level

Eingangsanschluss

(Eingangs-Minuspol)

Z2

High-level (posive input

terminal)

„Aukšto lygio“ (teigiamas) įėjimo

kontaktas

  „“

 ()

Nivel alto (terminal de

entrada posiivo)

High Level

Eingangsanschluss

(Eingangs-Pluspol)

Z4Z5 N/A Negalima  No permiido Nicht erlaubt

Page is loading ...

10 EN | LT | RU | ES | DE

LED Indicator Funcionality

SIM STAT

indicaion

SIM card status

OFF

No mains power

/ successfully

connected to

GSM/3G network

Steady on

SIM card is

atemping to

connect to the

GSM/3G network

/ SIM card is not

present / PIN code

enabled

NETW

indicaion

Signal strength

OFF No GSM/3G signal

Flashing

every 1 sec.

Poor

Flashing

several

imes per

sec.

Medium

Steady on Excellent

Gate automaion elements

FO

Fault output; open

collector type

24V

Power supply

output for powering

aux. equipment

GND Common terminal

Pulse input

LED Indikatorių paskiris

SIM STAT

indikatorius

SIM kortelės

būsena

NEŠVIEČIA

Neveikia

pagrindinis

maiinimo šalinis /

sistema sėkmingai

prisijungė prie

GSM/3G inklo

Nuolat

šviečia

Sistema dar

neprisijungė prie

GSM inklo / nėra

SIM kortelės /

įjungta PIN kodo

apsauga

NETW in-

dikatorius

Signalo siprumas

NEŠVIEČIA

Nėra GSM/3G

signalo

Mirksi kas

1 sek.

Silpnas

Mirksi

keliskart per

sek.

Viduinis

Nuolat

šviečia

Puikus

Vartų automaikos elementai

FO

Gedimų indikavimo

išėjimas; atviro

kolektoriaus ipas

24V

Maiinimo šalinio

išėjimas, skirtas

papild. įrenginių

maiinimui

GND Bendras kontaktas

Pulsinis įėjimas

 LED 

SIM STAT



 SIM



 

 

/



 

 GSM/3G







SIM  

GSM/3G  / 

 

SIM  /  SIM

  

 PIN 

NETW



 

 

 GSM/3G





  



 





  .

 





 

  

FO

  

; 

 



24V

 

 

 .



GND  

 

EN LT RU

Page is loading ...

ELDES GATE CONTROLLER ESIM120/ESIM32012 EN

GENERAL OPERATIONAL DESCRIPTION

MAIN FEATURES

Output control by

Input

noiica-

ion by

Intended

for

Extras

iOS

SMS

2000 1000

When a phone call is made to the phone number of the SIM card inserted in

ESIM120/ESIM320, the system will verify if the caller’s phone number exists

in the device database. If the caller is one of the 5 administrators or the phone

number belongs to one of the 2000 database users, the system will reject

the phone call, thus making the phone call free of charge, and open the gate.

If the phone number is not recognized, the system will reject the phone call

and ignore it. The gate controller can also control your gate automaically

in accordance with the scheduled ime or by sending an SMS text message

from the administrator’s phone number.

By connecing a sensor to one of the 3 inputs, the administrators can receive

SMS text messages regarding the gates that failed to close during the set

ime period.

CONFIGURATION METHODS

Remote coniguraion by

ELDES

Coniguraion

Tool

SMS

EN

ELDES GATE CONTROLLER ESIM120/ESIM320

EN 13

Before staring to use ELDES Configuration Tool sotware, please

read the user guide provided in the sotware’s HELP secion.

ELDES Configuration Tool sotware is secured with SMS

password. The default SMS password is 0000 (see SMS

CONFIGURATION).

• ESIM120 is NOT compaible with pure 3G SIM cards. Only 2G SIM cards

and 3G SIM cards with 2G/GSM proile enabled are supported. Meanwhile,

ESIM320 is compaible with any SIM card and supports both 2G and 3G

connecions. For more details, please contact your operator.

• We also recommend you to disable call forwarding, voice mail/text mes-

sage reports on missed/busy calls and similar services that might cause

incorrect system operaion. Please contact your operator for more details

on these services and how to disable them.

• For maximum system reliability we recommend you do NOT use a Pay As

You Go SIM card. Otherwise, in the event of insuicient credit balance on

the SIM card, the system would fail to make a phone call or send SMS text

messages.

• We advise you to choose the same GSM provider for your system as for

your mobile phone. This will ensure the fastest, most reliable SMS text mes-

sage delivery service and phone call connecion.

• Even though the installaion process of ESIM120/ESIM320 is not too com-

plicated, we sill recommend to perform it by a person with basic knowledge

in electrical engineering and electronics to avoid any system damage.

• Please use the 10-24V 50Hz/ 60Hz ~200mA AC or 10-24V 200mA DC

power supply unit that meets the EN 60950-1 standard. Any addiional de-

vice you connect to the system, such as a computer, must also be powered

by an EN 60950-1 approved supply. When connecing the power supply to

the system, switching the polarity terminal places does not have any afect.

ELDES GATE CONTROLLER ESIM120/ESIM32014 EN

TECHNICAL SPECIFICATIONS

Supply voltage

10-24V 50Hz/ 60Hz ~

200mA max / 10-24V

200mA max

Current used in idle state Up to 50mA

Modem frequency

ESIM120 2G -

850/900/1800/1900MHz

ESIM320 3G/2G EU -

900/1800/2100MHz

ESIM320US 3G USA -

850/1900MHz

Number of outputs 2

Output type

Relay; NO (normally-open)

or NC (normally-closed) -

conigurable

Maximum commuing output values

24V 50Hz/ 60Hz ~ 0,5A /

24V 1A

Number of “low” level (negaive) inputs 2

Number of “high” level (posiive) inputs 1

“Low” level (negaive) input value range 0... 16V -0.8... -0.4mA

“High” level (posiive) input value range 5... 50V 0.17 ... 1.7mA

Default inputs connecion type NO (normally-open)

Degree of protecion Complies with IP 20

Dimensions

87x107x29mm

(3.43x4.21x1.14in)

Operaing temperature range -20…+55 °C (-4... +131°F)

Humidity

0-90% RH @ 0... +40°C (0-

90% RH @ 32... 104°F)

TERMS OF USE

The following terms and condiions govern use of the ELDES GATE CON-

TROLLER device and contains important informaion on limitaions regard-

ing the product’s use and funcion, as well as informaion on the limitaions of

the manufacturer’s liability. Please carefully read these terms and condiions.

ELDES GATE CONTROLLER ESIM120/ESIM320

EN 15

For more informaion on your product, please visit eldesalarms.com

TECHNICAL SUPPORT

In order to ensure coninuous and proper operaion of the ELDES Gate Con-

troller device and uninterrupted service, it is the responsibility of the User to

make sure that: (i) the product is properly installed, and (ii) there is constant

electrical supply. If you experience diiculty during the installaion or sub-

sequent use of the system, you may contact “ELDES, UAB” distributor or

dealer in your country/region. For more informaion, visit eldesalarms.com

WARRANTY PROCEDURES

Warranty and out of warranty service should be obtained by contacing the

system integrator/dealer/retailer/e-tailer or distributor where the customer

purchased the product. When requesing for service, the proof of purchase

and the product serial number must be provided. The return of the defec-

ive product should be strictly through the original route of purchase, and

the customers shall pack the product appropriately to prevent the returned

product from sufering in the transportaion.

LIMITED LIABILITY

The buyer must agree that the system will reduce the risk thet, burglary or

other dangers but does not provide guarantee against such events. “ELDES,

UAB” will not assume any responsibility regarding personal or property, or

revenue loss while using the system.“ELDES, UAB” shall also assume no lia-

bility due to direct or indirect damage or loss, as well as unreceived income

when using the system, including cases, when the damages arise due to the

above menioned risks, when due to breakdown or malfuncion the user is

not informed in a imely manner about a risk which has arisen. In any case,

the liability of “ELDES, UAB”, as much as it is allowed by the laws in force,

shall not exceed the price of acquisiion of the product.

MANUFACTURER WARRANTY

ELDES provides a limited warranty for its products only to the person or

enity that originally purchased the product from ELDES or its authorized

distributor or retailer and only in case of defecive workmanship and mate-

rials under normal use of the system for a period of twenty four (24) months

from the date of shipment by the “ELDES, UAB” (Warranty Period). Warran-

ty obligaions do not cover expandable materials (power elements and/or

bateries), holders and enclosures. The warranty remains valid only if the

system is used as intended, following all guidelines outlined in this manual

and in accordance with the operaing condiions speciied. The warranty is

ELDES GATE CONTROLLER ESIM120/ESIM32016 EN

void if the system has been exposed to mechanical impact, chemicals, high

humidity, luids, corrosive and hazardous environments or force majeure

factors. If a hardware defect arises and a valid claim is received within the

Warranty Period, at its own discreion, “ELDES, UAB” will either (a) repair a

hardware defect at no charge, using new or refurbished replacement parts,

or (b) exchange the product with a product that is new or which has been

manufactured from new or serviceable used parts and is at least funcion-

ally equivalent to the original product, or (c) refund the purchase price of

the product.

CONSUMER PROTECTION LAWS

For consumers who are covered by consumer protecion laws or regulaions

in their country of purchase or, if diferent, their country of residence, the

beneits conferred by this warranty are in addiion to all rights and remedies

conveyed by such consumer protecion laws and regulaions. This warranty

grants upon you speciic legal rights, and you may also have other rights

that vary by country, state or province.

SAFETY INSTRUCTIONS

Please read and follow these safety guidelines to safeguard yourself and

others:

• DO NOT use the system where it can cause potenial danger and interfere

with other devices – such as medical devices

• DO NOT use the system in hazardous environment

• DO NOT expose the system to high humidity, chemical environment or

mechanical impact

• NEVER install or carry out maintenance during stormy weather.

• DO NOT atempt to repair the system yourself - any repairs must be car-

ried out by fully qualiied personnel only

Page is loading ...

ELDES GATE CONTROLLER ESIM120/ESIM320

EN 43

Value: ssss – 4-digit SMS password; n – administrator slot number, ran-

ge - [1... 5].

Example: 2568_NR1:44170911XXXX1

+370610XXXXX 370610XXXXX

The same command is used to change the administrator phone

number that is already set up.

3. Remove administrator. In order to remove the administrator, send the

following command to the system’s phone number from other adminis-

trator’s phone number:

ssss_NRn:DEL

Value: ssss – 4-digit SMS password; n – administrator slot number, ran-

ge - [2... 5]

Example: 2568_NR2:DEL

Removal of NR1 phone number is denied. The system allows to

modify this phone number only.

4. Administrator phone number list. In order to receive an SMS text mes-

sage containing the set up administrator phone number list, send the fol-

lowing command to the system’s phone number from the administrator’s

phone number:

ssss_HELPNR

Value: ssss – 4-digit SMS password.

Example: 2568_HELPNR

5. Date and ime. You can set up system’s date and ime by sending the fol-

lowing command to the system’s phone number from the administrator’s

phone number:

ssss_yyyy.mm.dd_hr:mn

Value: ssss – 4-digit SMS password; yyyy – year; mm – month, range –

[01... 12]; dd – day, range – [01... 31]; hr – hours, range – [00... 23]; mn –

minutes, range – [00... 59].

Example: 1111_2014.03.16_14:33

ELDES GATE CONTROLLER ESIM120/ESIM32044 EN

6. Add user phone number. The system supports up to 2000 users that

are permited to control the gates by free of charge phone call (drop-call).

In order to add a user phone number, send the following command to the

system’s phone number from other administrator’s phone number:

ssss_N:44170111XXXX1

Value: ssss – 4-digit SMS password.

Example: 2568_N:44170911XXXX8

The phone number must be set up in internaional format without

using the “plus“ character in the front of the phone number.

You can set up a name for the user phone number. In

order to do so, please refer to the following example:

2568_N:44170911XXXX8:John

The user name is not mandatory and you may not want to use it

when adding the user, for example: 2568_N:44170911XXXX8

In order to add muliple users simultaneously (up to 9 phone

numbers per single SMS text message), please refer to he following

example: 1111_N:44170911XXXX8:John_44170911XXXX9:_

44170911XXXX3:Tom

7. Remove user. The removal of the user can be carried out in one of the

following ways:

• By user phone number. Send the following command to the system’s

phone number from other administrator’s phone number:

ssss_D:nnnnnnnnnnnn

Value: ssss – 4-digit SMS password, nnnnnnnnnnnn – user phone

number.

Example: 2568_D:44170911XXXX8

• By user name. Send the following command to the system’s phone

number from other administrator’s phone number:

ssss_D:vvvvvvv

ELDES GATE CONTROLLER ESIM120/ESIM320

EN 45

Value: ssss - 4-digit SMS password, vvvvvvv – user name.

Example: 2568_D:John

Before using the command that allows to remove the user by

name, you must ensure that the user phone number has a name

set up (ssss_N:nnnnnnnnnnn:vvvvvvv). Please refer to step 6 or

ELDES Configuration Tool sotware.

In order to remove muliple users simultaneously (up to 9 phone

numbers per single SMS text message), please refer to the

following example: 2568_D:John_ 44170911XXXX9_Tom

8. User phone number list. In order to receive an SMS text message con-

taining the list of all added user phone numbers, send the following

command to the system’s phone number from the administrator’s phone

number:

ssss_GETALLNUMBERS

Value: ssss - 4-digit SMS password

Example: 2568_GETALLNUMBERS

Based on the quanity of users added in the database, the system

might reply with several to dozens of diferent SMS text messages.

9. System informaion. In order to view system date and ime, signal

strength, free and available space in the user database, input state

(ALARM/OK), send the following command to the system’s phone num-

ber from other administrator’s phone number:

ssss_INFO

Value: ssss – 4-digit SMS password.

Example: 2568_INFO

Page is loading ...

Made in the European Union

eldesalarms.com

Eldes GSM gate controller 120 User guide

Eldes GSM gate controller 120 User guide

in other languages

Related papers

Other documents