Renishaw Upgrade brackets and blanking plates User guide

Information leaflet

H-1000-7585-02-A

Upgrade brackets and blanking plates

www.renishaw.com/cmm

This leaflet details the bracket options available when upgrading or replacing Renishaw controllers and / or probe interfaces. By

using a combination of the following brackets and / or blanking panels, any combination of existing and new Renishaw product

can be mounted together inside a 19 inch cabinet rack. The bracket kits shown in this leaflet are supplied with all the necessary

fixtures.

Configuration options for 2U high products

Parts list

No. Product Description Part number

1 Large mounting plate To mount 2U (1/3 or 2/3 19 inch width) product A-1018-0123

2 Rack mount bracket kit To mount 2U (1/3 and 2/3) product together A-1018-0124

3 1U conversion bracket To mount a 1U 1/3 product next to a 2U 2/3 product A-1018-0173

4 Small mounting bracket kit To mount full width 1U product: UCC T3, UCC T5, SPA3

PHC10

A-5518-0005

A-1018-0189

5 1U full width blanking panel To fill 1U space when 1U product is used in 2U space P-PC01-0002

6 1/3 1U mounting bracket kit To mount a 1/3 1U product in a full width 1U space A-1018-0179

7 Link bracket kit To link two 2U products together A-1018-0126

1 1

2 2

Renishaw plc

New Mills, Wotton-under-Edge,

Gloucestershire, GL12 8JR

United Kingdom

T +44 (0)1453 524524

F +44 (0)1453 524901

E [email protected]

www.renishaw.com

For worldwide contact details, please visit our

main web site at www.renishaw.com/contact

*H-1000-7585-02*

RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT

AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT.

RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.

Configuration options for 1U high products

4 4

6 6