LG 42LP860H Installation guide

Brand: LG

Model: 42LP860H

Type: Installation guide

This manual is also suitable for

55LP860H

Printed in Korea

www.lg.com

INSTALLATION MANUAL

LED LCD TV

Please read this manual carefully before operating

your set and retain it for future reference.

LP860*

P/NO: MFL67738206 (1306-REV00)

 

CONTENTS

INSTALLATION MENU

Introduction                                                            12

LGHotelModeSetup                                                13~17

USBCloning                                                           18

SendToUSB                                                         19

ReceiveFromUSB                                                    19

LogeImageDownload                                                  20

PasswordChange                                                       21

SetIDSetup                                                            22

ConfigurationSetup                                                  23~25

ExternalSpeaker                                                        26

SpeakerOutputSetup                                                 27

IRSetup                                                               28

NetworkSetup                                                     29~30

Pro:Centric                                                         31~32

PowerSaving                                                           33

CECSetup                                                            34

ClockSetup                                                           35

PreLoadedAppSetup                                                     36

MediaShare                                                            37

DOWNLOAD EXTRA CONTENTS                             38~39

DOWNLOAD A SPLASH IMAGE                               40~41

LOCATION AND FUNCTION OF CONTROLS                     2

EZMANAGER

EZ-Manager21-Introduction                                               3

EZ-ManagerWizard                                                      3

AutomaticallyforSetup                                           4~6

ManuallyforSetup                                               7~9

USBLGSmartInstallUtility                                      10~11

Partsandbuttons                                                        2

LEDClockconnection                                                     2

LOCATION AND FUNCTION OF CONTROLS

*ImageshownmaydifferfromyourTV

Button Description

Scrollsthroughthesavedprogrammes

Adjuststhevolumelevel

OK

ꔉ

Selectsthehighlightedmenuoptionorconfirmsaninput

SETTINGS Accessesthemainmenu,orsavesyourinputandexitsthemenus

INPUT Changestheinputsource

/

Turnsthepoweronoroff

SETTINGS

INPUT

Speakers

Buttons

Screen

LGLogoLightand

Remotecontrolsensor

ThisTVcanbeconnectedtoaLEDClock

viatheCLOCKport

(RGB)

/DVI IN

1 2

COMPONENT

LAN

ANTENNA/

CABLE IN

OPTICAL

AUDIO OUT

AUDIO IN

(COMPONENT/RGB/DVI)

(CONTROL & SERVICE)

RS-232C IN

LNB IN

Satellite

H/P OUT

IN 3USB IN

PCMCIA CARD SLOT

SPEAKER OUT

VOLUME CONTROL

STEREO (8 Ω)

CLOCK

LED Clock

(*NotProvided)

LEDClockconnection

Partsandbuttons

 

EZMANAGER

EZ-ManagerWizard



ImageshownmaydifferfromyourTV

Introduction

ThePro:CentricPlatformenablesyoutosimplyinstall,manageanduseguest-centricsolutions

ThedefaultDomain"procentriclocal"andIPServerAddressareneededtoberegisteredinDNS

TVwillcontacttheIPServerusingthedefaultDomain"procentriclocal"viaIPonserversearchpage

IfTVdoesn'tcontacttheServer,TVwillsearchthepre-definedchannelearlierthanallchannels

(DVB-Conly)

The frequencies of pre-defined channels are ‘794000, 714000, 634000, 554000, 474000, 394000,

314000,234000,154000,90000khz’

EZ-Manager Wizard

Exit

No Pro:Centric

Welcome to LG’s EZ-Manager Wizard

Use this setup wizard to configure the TV for Pro:Centric and/or Free-

To-Guest (FTG) operation.

Select ‘Next’ to continue.

If a Pro:Centric Server will not be installed and/or you do not wish to

use the wizard to configure this TV for FTG Mode, you may exit the wizard.

Select ‘No Pro:Centric’ to disable the Pro:Centric feature of this TV, or

select ‘Exit’ to quit.

This setup wizard will start automatically in 10 seconds.

-IfyouareusingPro:Centric,thissetupwizardtillhelpyoueasilysetuptheTV

Select'Next'tocontinue

-Otherwise,youmayselecteither'NoPro:Centric',

ifyouwillnotbeinstallingaPro:CentricServeror'Exit'toquit

EZ-ManagerWizard-AutomaticallyforSetup

-IfyouintendtosetRoomNumberaspartoftheTVconfiguration,usetheRoomNumberoptionto

assigntheRoom#forthisTVbeforeyoucontinuewithadditionalconfiguration

-IntheLabelfield,usetheUp/DownarrowkeystospecifyaNorth,South,East,orWestdesignation

forthisTV

-IntheRoomNumberfield,youcanusethenumberkeysontheInstallerRemotetodirectentera

roomnumber

-Tocontinue,moveandselect'Next'

1FromtheTVConfigurationOptionsscreen,youcanchoosehowtoproceedwiththeconfiguration

ofthisTVWhetheryouwillconfiguretheTVforPro:Centricoperationviathewizardoruse

aUSBmemorydevicetoconfiguretheTV,youmayfirstwishtosettheRoomNumberontheTV

EZ-Manager Wizard

2 3 4

Exit Next

Room Number

USB Configuration

TV Configuration Options

To configure the TV for Pro:Centric operation, select ‘Next’.

To set the optional Room Number, select ‘Room Number’.

To access the TV’s USB Download Menu, select ‘USB Configuration’.

This setup wizard will continue automatically in 60 seconds.

EZ-Manager Wizard

2 3 4

Exit Next

Room Number

USB Configuration

Label, Room Number

Select a Label and/or use the alpha/numeric keypad on the remote to input the Room Number.

When done, select ‘Next’ to continue.

Label Room Number

1 7 1 6

 

2ThisstepautomaticallysearchesforthePro:CentricServer

IfwasfoundthePro:Centricdatachannel,selectthe"Next"

EZ-Manager Wizard Room # 1716

1 3 4

Exit

Manual Pro:Centric

Back

Pro:Centric Server was found...

It may take 5 min 00 second(s).

The Pro:Centric data channel was found!! (Data Channel: 698000, Mode:GEM)

The Download window will open in 5 seconds. You may wait or select ‘Next’.

Otherwise, if you select ‘Exit’, the Pro:Centric Server settings can be retained

and used during the next download when you select ‘Save & Exit’ in the Exit Window.

Status : Tuning Frequency 698000 (KHz)

The Pro:Centric data channel is found!!

(Data Channel: 698000, Mode: GEM)

EZ-Manager Wizard Room # 1716

1 3 4

Exit

Manual Pro:Centric

Back

Searching for Pro:Centric Server...

It may take 1 min 00 second(s).

This step automatically searches for the pro:centric Server.

If there is no Pro:Centric Server installed, you do not need continue

with this procedure. Please select either ‘Exit’ or ‘Manual Pro:Centric’.

Status : Tuning Frequency 698000 (KHz)

TV is now searching all of the channels for the data channel...

EZ-Manager Wizard Room # 1716

1 2 4

Processing the Pro:Centric Configuration...

Downloading the Pro:Centric application files takes a few minutes.

Please wait...

Application files

Maintenance files

- Updating Configuration File

- Updating Splash Logo Image

In progress...

Pending...

10%

Retrieving files from data Freuquency 698000

Warning - Do not remove AC power or the signal cables during these steps.

3DownloadingthePro:Centricapplicationfilestakesfewminutes

4Aftertheinstallationiscompleted,thefollowingscreenwillbedisplayed

EZ-Manager Wizard Room # 1716

1 32

Turn OffReboot

EZ-Manager Configuration Complete

The TV will turn off in 10 second(s).

Installed Components

Pro:Centric Application

Maintenance Files

GEM application downloaded

Internal _CATV_ChMap_chOnly.tll

marriott_logo.jpg

  

EZMANAGER

EZ-ManagerWizard-ManuallyforSetup

2Pleaseselectthe'Pro:Centric Manually'

1SelectaLabeland/orentertheRoomNumberusingthenumerickeypadontheremotes

Tocontinue,moveandselect'Next'

EZ-Manager Wizard

2 3 4

Exit Next

Room Number

USB Configuration

TV Configuration Options

To configure the TV for Pro:Centric operation, select ‘Next’.

To set the optional Room Number, select ‘Room Number’.

To access the TV’s USB Download Menu, select ‘USB Configuration’.

This setup wizard will continue automatically in 60 seconds.

EZ-Manager Wizard Room # 1716

1 3 4

Exit

Manual Pro:Centric

Back

Searching for Pro:Centric Server...

It may take 1 min 00 second(s).

This step automatically searches for the pro:centric Server.

If there is no Pro:Centric Server installed, you do not need continue

with this procedure. Please select either ‘Exit’ or ‘Manual Pro:Centric’.

Status : Tuning Frequency 698000 (KHz)

TV is now searching all of the channels for the data channel...

EZ-Manager Wizard Room # 1716

1 3 4

Exit

Back

Pro:Centric Mode

GEM

698000

6900

data channel found

256QAM

99%

Country

Media Type

Frequency (KHz)

Symbolrate (kS/s)

Modulation

Signal Strength

Signal Qualit

3. Configure the appropriate Pro:Centric settings in the TV.

EZ-Manager Wizard Room # 1716

1 3 4

Exit

Back

Pro:Centric Mode

GEM

192

168

IP Server found

Country

Media Type

IP Address

Port

- If you select Country, you can change a country.

Albania Austria Belarus

Belgium Bosnia Bulgaria

Croatia Czech Estonia

France Germany Greece

Hungary Ireland Italy

Kazakhstan Latvia Lithuania

Luxembourg Morocco Netherlands

Poland Portugal Romania

Russia Serbia Slovakia

Slovenia Spain Switzerland

Turkey UK Ukraine

 

EZ-Manager Wizard Room # 1716

1 2 4

Processing the Pro:Centric Configuration...

Downloading the Pro:Centric application files takes a few minutes.

Please wait...

Application files

Maintenance files

- Updating Configuration File

- Updating Splash Logo Image

In progress...

Pending...

10%

Retrieving files from data Freuquency 698000

Warning - Do not remove AC power or the signal cables during these steps.

4DownloadingthePro:Centricapplicationfilestakesfewminutes

5Aftertheinstallationiscompleted,thefollowingscreenwillbedisplayed

EZ-Manager Wizard Room # 1716

1 32

Turn OffReboot

EZ-Manager Configuration Complete

The TV will turn off in 10 second(s).

Installed Components

Pro:Centric Application

Maintenance Files

GEM application downloaded

Internal _CATV_ChMap_chOnly.tll

marriott_logo.jpg

EZ-ManagerWizard-USBLGSmartInstallUtility

1Selectthe'USBConfiguration→USBDownloadMenu→AccessingUSBStorageDevice'

*IfyouhaveUSBMemoryfor"lgsmartinstall"or"LGSMARTINSTALL"folder,

thisstepautomaticallysearchesfortheUSBfilelistpage

TV Software Update(Expert)

The Follwing update les are found in the USB device.

Select the le you want to apply to update this TV

Or press EXIT to cancel the update.

TV Software Update

LOGO Image Download

EZ-Manager Wizard

2 3 4

Exit

Room Number

USB Configuration

Configure the TV using USB Memory Device

Insert a USB memory device, and then select ‘USB configuration’ to

access the TV’s USB Download Menu.

(See Commercial Mode Setup Guide for more Information.)

Integrated USB Downloading

All checked files will be downloaded when you press enter key.

USB LG Smart Install Utillity

xxLP860H-ZA_Bootlogo.jpg

xxLP860H-ZA_Bootlogo2.jpg

xxLP860H-ZA_TLL_EU.tll

xxLP860H-ZA_CPU.epk

 

USB LG Smart Install Utillity Room # 1716

Warning - Do not remove the USB device during this process

Downloading Data...

ComleteMaintenance File

File Name:

Boot Logo File

File Name:

Software File(CPU)

File Name:

Ready

xxLP860H-ZA_TLL_EU.til

xxLP860H-ZA_Bootlogo.jpg

xxLP860H-ZA_CPU.epk

2DownloadingthePro:Centricapplicationfilestakesfewminutes

3Aftertheinstallationiscompleted,thefollowingscreenwillbedisplayed

Complete

This window will close in 3 second(s).

Mainenance File :

Boot Logo File :

Software File (CPU) :

xxLP860H-ZA_TLL_EU.tll

xxLP860H-ZA_Bootlogo.jpg

xxLP860H-ZA_CPU.epk

Installed Components

USB LG Smart Install Utillity Room # 1716

 

INSTALLATION MENU

Introduction

The abundant functions for Hotel TV linked with software installation can be projected on OSD as

‘InstallationMenu’

ThewiderangeofhotelfeaturescanbeperformedsimplyonadditionalwindowtoenhancetheLG

hotelTV’seasyinstallationandconvenientoperationforHotelierandSystemIntegrators

Press the Home button for more than 5 seconds using the user remote control, programme

informationwillappearattopleftonthescreen

EnterafourdigitpasswordandpressOKbutton



•TheTVissetwiththeinitialpassword“1-1-0-5”

Usethe buttontoselectthedesiredmenu

C05



ImageshownmaydifferfromyourTV

InstallationMenu(V223)

LGHotelModeSetup

USBCloning

PasswordChange

SetIDSetup

ConfigurationSetup

ExternalSpeaker

IRSetup

NetworkSetup

Pro:Centric

PowerSaving

CECSetup

ClockSetup

PreLoadedAppSetup

MediaShare

LG Hotel Mode Setup

S/WV02030001/MCUV0205/FPGAVd279

PICTURE

SETUP

TIMEAUDIO

OPTIONLOCK

Smart Share

INPUT

 

INSTALLATION MENU

InstallationMenu(V2.23)

LGHotelModeSetup

USBCloning

PasswordChange

SetIDSetup

ConfigurationSetup

ExternalSpeaker

IRSetup

NetworkSetup

Pro:Centric

PowerSaving

CECSetup

ClockSetup

PreLoadedAppSetup

MediaShare

LG Hotel Mode Setup

S/WV02.03.00.01/MCUV02.05/FPGAVd.279

LGHotelModeSetup

-DecidetoselectworkingstatusofTVSetwhenturnonmainpower.

-YoucansetwithPWR,STD,LST.

-PWRalwaysmakeTVsetOnstatuswhenturnonmainpower.

-STDmakeStand-bystatuswhenturnonmainpower.

-LSTmakeTVSetworklikepreviouspowerstatus.AssameconceptasPowerBackupmode;Ifmain

powerwereturnedoffinPowerOnstatus,TVSetwouldworkinOnstatus.Ifmainpowerwereturned

offinStand-bystatus,TVSetwouldworkinStand-bystatus.

(2)

Power On Status

- Decide to workall functions of 'Hotel Mode Operation' or not by setting' Hotel Mode Operation' as

Yes(Work)orNo(DoNotWork)

-When'HotelModeOperation'issettoYes(Work),allfunctionsofHotelModeapply.

-When'HotelModeOperation'issettoNo(DoNotWork),allfunctionsofHotelModeDoNotapply.

-Whenitissetto‘Yes’,‘KeyLock’itemoftheUsermenuisdisabledandtheOSDisdisplayedsame

totheLocalKeyOperationsettingoftheHotelmode.

-Whenitissetto‘Yes’,allitemsreservedattheSchedulelistaredeletedandthereservationfunction

isnotsupported.(appliedforthemodelofferingthereservationfunction)

-TheTVtriggeredbytheexternaldevice(ex:SIMPLINK,TVLink-Tuner,etc.)operatesseparatelyfrom

theHotelmode.

-Whenitissetto‘Yes’,UserMenu->Option->‘FactoryResetandDemoMode’aredisabled.

-When‘HotelModeOperation’issettoYes(Work),allskippedprogramsarenottunedbynumberkeys.

-When‘HotelModeOperation’issettoYes(Work),DetailedInformationabouttheprogrammeisnot

availableintheEPG.

(1 ) Hotel Mode Operation

Usethe buttontoselecttheLGHotelModeSetup.

Usethe OK buttonandthen buttontoselectHotelModeOperation.

*When'HotelModeOperation'issettoYes(Work),allfunctionsofHotelModeapply.



ImageshownmaydifferfromyourTV.

LGHotelModeSetup(V2.23)

HotelModeOperation

•PowerOnStatus

•SetupMenuDisplay

•ProgrammeChange

•InputSourceChange

•MenuDisplay

•OSDDisplay

•LGIROperation

Yes

◄

Yes

►

▼

▲

STD

-Decidetoenter'SetupMenuDisplay'ornotinthe'MainMenu'bysetting'SetupMenuDisplay'as

Yes(EnterPossible)orNo(EnterImpossible)onthe"LGHotelModeSetup"OSD

(3) Setup Menu Display

- Decide to change channel or not by setting 'Programme Change' as Yes(Change Possible) or

No(ChangeImpossible)whenpresentsourceisTV

-When'ProgrammeChange'issettoNo(ChangeImpossible),ProgrammeKey,NumeralKey,ListKey,

TV/RADKey,QViewKeydoesn'tworkandentering'ChannelMenu'intheMainMenuOSDisimpos-

sible

-When'ProgrammeChange’issettoYes(ChangePossible),ProgrammeKey,NumeralKey,ListKey,

TV/RADKey,QViewKeydoesworkandentering'ChannelMenu'intheMainMenuOSDispossible

-When'ProgrammeChange'issettoNo(ChangeImpossible),'Programme'itemin'OnTime'menuwill

befixed

-When'ProgrammeChange'issettoNo(ChangeImpossible),entering'SetupMenu'inthe'MainMenu'

OSDisimpossibleregardlessof'SetupMenuDisplay'item

(4) Programme Change

-Decidetochangeinputsourceornotbysetting'InputSourceChange'asYes(Changepossible)orNo

(Changeimpossible)

-When'InputSourceChange'issettoNo(Changeimpossible),TV/RADIOkeyandINPUTkeydoesn't

work

-When'InputSourceChange'issettoNo(Changeimpossible),user'sinput(pressingProgrammekey,

numeralkey,Listkey,QViewkeyinallInputsourceexceptTVsource)doesn'tworkandwhenenter-

ing'SetupMenu'iteminthe'MainMenuOSD'exceptTVmodedoesn'taccepted

Becauseentering'SetupMenu'itemmakespresentmodeasTVmodeeventhoughpresentmodeis

notTVmode

ForthefunctionthatturnstoTVmodedoesn'twork

-When'InputSourceChange'issettoYes(Changepossible),thenchanginginputsourceisavailable

- When 'Input Source Change' is set to No(Change Impossible), TV set always turns on fixed input

sourceandvolumeinformationregardlessofalreadysetProgrammeinformation

-When'InputSourceChange'issettoNo(ChangeImpossible),entering'SetupMenu'exceptTVmode

doesn'tpossibleregardlessof'ProgrammeChange'or'SetupMenuDisplay'item

-WhenthisissettoNo,itwillonlybeturnedonwiththevolumeinformationintheinputsourceirrelevant

fromthePRandinformationsetinOnTime

(5) Input Source Change

-Functiontodecidewhetherworkwithmenuoflocalkeyornot

-SetYES(Work)orNO(DoNotWork)

- Although select NO(Do Not Work), the action that press a Home button for 5 seconds to enter

InstallationMenuisavailable

-WhenselectYes(Work),Menuworks

(6) Menu Display

  

-DecidetodisplayOSDornotbysetting'OSDDisplay'asYes(Mark)orNo(NoMark)

-When'OSDDisplay'issettoNo(NoMark),allOSDisnotdisplayedexceptinstallaionmenu

(7) OSD Display

-Decide'MaxVolume'betweenchangingrange0~100

-When'MaxVolume'isset,usercanchangeuptosetvolumevalue

-When'MaxVolume'isset,volumejustgoesuptothe'MaxVolume’valuein'OnTimeMenu’

(10)

Max Volume

-DecidewhetherworktheLGremotecontrolornot

-SettoYes(Work)orNo(DoNotWork)

-When‘LGIROperation’issettoNO(NotWork),allkeysdon’twork

-AlthoughsettoNo,itcanworkinServicemode

-AlthoughsettoNo,Homekeyactiontoenterthe‘InstallationMenu’andkeyactiontoenterPassword

areavailable

-When‘LGIROperation’issettoYes(Work),allkeysareavailable

(8) LG IR Operation

(9) Local Key Operation

- Decide to operate 'Local Key' or not by setting “Local Key Operation" as Yes(Work) or No(Do Not

Work)

-When'LocalKeyOperation'issettoNo(DoNotWork),allLocalKeydoesn'tworkexceptvolumeup/

downkeyandpowerkey

-When'LocalKeyOperation'issettoNo(DoNotWork),LocalKeyworkinginservicemodeisstillavail-

able

-When'LocalKeyOperation'issettoYes(Work),allLocalKeyworkingisavailable

-Whensetboth'LocalKey'and'RemoconOperation’asNo(DoNotWork),PowerkeyofRemoconwork

asexceptionalcase

-EvenwhenthelocalkeyoperationissettoNo,whenyoupressthelocalkeyfor5seconds,theHome

keywilloperatetoaccesstheInstallationMenu

-Exception:Incaseofthecommercialmodel,althoughbothIRandLocalkeyoperationaresetto'No'

 (nooperation),youcanoperatethevolume+/-keyandthepowerkey

Itisamodetosetwhethertoupdatedtvchannelautomaticallyornot

WhenDTVChannelUpdateissetto’Auto’,thefunctiontoupdateTV’sprogrammemapaccordingto

dtvprogramme’sstreaminformation

DTVChannelUpdateissetto‘Manual’,thefunctiontokeepTV’sprogrammemapeventhoughdtv

programme’sinformationischanged

(11)

DTV Channel Update (Thisfeatureisnotavailableforallmodels)

-SetthechanneltodisplayandVolumeLevel,etcwhenturnonpowerinACPowerOnorStand-by

status

-SettoYes(Work)orNo(DoNotWork)

-When‘PowerOnDefault’issettoNo,itisnotappliedtothesubordinateProgramme,Volume,A/V

Settingmenu

-WhenPowerOnDefaultissettoYes,itcansetbyenteringthesubordinatemenu

(12)

Power On Default

- Set to Yes(Work) or No(Do Not Work).

- Programme that is set to ‘Radio Programme’ and only has Sound should decide whether to set

‘Video Blank’ or not.

- When ‘Radio Video Blank’ is set to Yes(Work), ‘Video Blank’ works only in case of Radio Programme.

- Although set to Yes(Work), if there are Video signal, ‘Video Blank’ wouldn’t work. In consideration

of case that display background screen and broadcast only with Radio, ‘Video Blank ’works only

when there is no Video signal.

- When set to No(Do Not Work), ‘Video Blank’ do not work although it is the Radio Programme.

- This operates only in the Analog TV Mode.

- If both 'Volume' data and 'On Time' is set, but just the value is different, then 'Volume' has priority.

-This sets whether to apply the Volume Level or not when the power is turned on.

When both the Volume and ON TIME Volume are set and have different values, the Volume Level

value is set as the ON TIME Volume value, and cannot move to the ON TIME Volume item.

- The next value for the max volume is OFF. And next it will be changed to 0.

(12-3) Volume

- Set to Yes(Work) or No(Do Not Work).

- If ‘A/V Setting’ is changed from No to Yes, parameters that are set before entering Installation Menu

are applied whenever turn on power.

- Following Parameters are applied to basic.

Picture section - PSM mode, Picture Data (Contrast, Brightness, Colour, Sharpness, Tint)

Sound section - SSM mode, Sound Data (Balance, Equalizer Data) and AVL and Language, Teletext

language, ARC Data.

Except these, other Parameters are applied differently according to the TVSet.

(12-4) A/V Setting

(13)

Radio Video Blank

- If the Input source is DTV or ATV, or Radio the set programme is played when the power is turned on.

- Only when the Input source is DTV or ATV, it can be entered into the Programme item.

- When the Input source is turned off, the Last input at the time of the power-off is turned on, and when

the Last input is the RF, the Last programme is played.

- If the Input source is the DTV, ATV, RADIO, the programme number existing at the programme table

can be selected.

- The programme should be rotated.

- If both the programme and the ON TIME are set, the programme takes the priority.

(12-2) Programme

- Set whether it is turned on by the set input source or by the last stored input source.

- It is turned on by the Last Memory Input if the Input source is turned off.

- It is turned on by the Last Pr. If the Input source is turned off and the Last Memory Input is the RF.

- All sources supported by the said model can be set as Input source. (The Input source value should

be rotated.)

- If both the Input source and the ON TIME are set, the Input source takes the priority.

- If the DTV/Radio Channel does not exist at the map, the DTV/Radio is skipped while navigating.

- When the Input source is changed to the DTV/Radio, the Programme No. is set to the first programme

of the Channel map of the DTV/Radio.

- When the Input source is changed to the ATV, the Programme No. is set to 0. (If the channel map

structure does not support this, it follows the structure of the said model.)

(12-1) Input Source

  

-ItemtosetstartingprogrammeofRadioProgramme

-Availableprogrammestosetare0~199

(13-1) Start PR. No.

-SpecifythenumberofprogrammetosettoRadioProgramme

-ThemaxvaluefortheNoofPRis10

-CannotsetmorethanmaximumavailableprogrammenumberInotherwordsifStartPRare

setto195,numberofprogrammecannotsetmorethan5

-RadioProgrammeshouldbeinsequencewithstartingprogramme

(13-2) No. of PR.

Initial Configuration and Configuration Detail

Item Active De-active Initial

Yes

Auto

Yes

ATV~MAX_INPUT

(1-MaxPR)

0~100

Yes

0~100

0~199

0~10

Manual

Off

STD

Yes

100

Auto

Off

HotelModeOperation

 PowerOnStatus

 SetupMenu

 ProgrammeChange

 InputSourceChange

 MenuDisplay

 OSDDisplay

 LGIROperation

 LocalKeyOperation

 MaxVolume

DTVChannelUpdate

 PowerOnDefault

  InputSource

  Programme

  Volume

  A/VSetting

 RadioVideoBlank

  StartPRNo

  NoofPR

 

CommercialTVs havethe capability tosupport cloninginternalTV data and programmeinformation

withanexternalclonedevicecalled“TVLink-Loader”,inordertocopyTVdataaccuratelyandquickly.

The clone internalfunctions use slightlydifferentinternal processes forthe two typesof commercial

TVs.However,theUIofcloningfeatureremainsthesameinboth.

Regardingthedemandsoverthecurrentcloningfeatureforquickercloning,betterportabilityandetc,

wewouldliketoannouncethecloningprocessviaUSBport,namedasUSBCloning.

USBcloningprocessisdividedinto2mainprocesses.OneiswritingthepreviouslysavedTVdatainto

theTV,andoneanotherisreadingofcurrentTVdataintoUSBmemorycard.Toavoidanyconfusion

duetothewords,itisclearlyspecifiedas“ReceivefromUSB”and“SendtoUSB”inthewholeprocess.

ThedataclonedarethesamedataclonedbypreviousTVLink-Loader.Detailsareexplainedinthefol-

lowing:

1.TVdataincludes:

A.InstallerMenusettings

B.Mainmenusettings(Audio,Pictureetc)

2.Analog/DigitalChannelinformationincludes:

A.Channelnumbers

B.Channellabel

C.Channelattributesincludingchanneltype,skippingstatusandetc.

TheuserneedsaUSBmemorycardwithFATformattedtomakesuccessivecloningviaUSBport.A

USBmemorycardsizemorethan128MegaBytesandlessthan4GigaBytesisrecommended.

USBCloningProcedure

(1) Overview USB Cloning Procedure

(2) Data To Be Cloned

(3) Requirements for USB

NOTE

Currently,supporttheprecedingUSBfilesystemforFATfileformatonly.Otherfileformatsincluding

NTFSis not currentlysupported.MicrosoftWindowsofficiallysupportsFATfortheUSBmemory

card.

Page is loading ...

LG 42LP860H Installation guide

Brand: LG

Model: 42LP860H

Type: Installation guide

This manual is also suitable for

55LP860H

Download PDF

report

LG 42LP860H Installation guide

This manual is also suitable for

LG 42LP860H Installation guide

Related papers

Other documents