Danfoss ECL Comfort 300, F11 User guide

Type
User guide

Danfoss ECL Comfort 300, F11 is designed to provide an easy and intuitive way to control your heating and domestic hot water (DHW) systems. With its user-friendly interface and range of features, you can tailor your comfort settings to your specific needs.

Easily adjust the temperature of your heating and DHW circuits, and select between manual operation, scheduled operation, comfort temperature, setback temperature, and standby mode. You can also check your schedules, add extra periods, and even restore factory set schedules.

For added flexibility, the ECL Comfort 300, F11 allows you to set the heat curve slope, which determines how quickly your system responds to changes in outdoor temperature. This ensures optimal comfort and energy efficiency.

Danfoss ECL Comfort 300, F11 is designed to provide an easy and intuitive way to control your heating and domestic hot water (DHW) systems. With its user-friendly interface and range of features, you can tailor your comfort settings to your specific needs.

Easily adjust the temperature of your heating and DHW circuits, and select between manual operation, scheduled operation, comfort temperature, setback temperature, and standby mode. You can also check your schedules, add extra periods, and even restore factory set schedules.

For added flexibility, the ECL Comfort 300, F11 allows you to set the heat curve slope, which determines how quickly your system responds to changes in outdoor temperature. This ensures optimal comfort and energy efficiency.

*087R8296*
*VIBCW202*
Remove tape on the back.
Position on inside of
ECL Comfort cover.
ECL Comfort 300
F11
VI.BC.W2.02
2007.05
*087R8296*
*VIBCW202*
Remove tape on the back.
Position on inside of
ECL Comfort cover.
ECL Comfort 300
F11
VI.BC.W2.02
2007.05
A
–B
–C
–1
–2
–3
–4
A
B
C
Arrow
buttons
change display
(move between
the lines on the
ECL Card)
Shift button moves
between items in the
display
Minus and plus
buttons adjust values
or time
Mode selector changes
the mode of operation
Circuit
selector
changes
between
heating (I) and
DHW (II) circuits
Selecting mode
Manual operation
Scheduled operation
Comfort temperature
Setback temperature
Standby
Push to change the
mode of the controller
The arrow indicates comfort
or setback temperature
during scheduled operation
Adjusting the temperature
of the current heating period
Outdoor
temperature
Room / DHW
temperature
913-
20
Desired temperature
Push to adjust up
or down
Adjusting the temperature
of the other mode
Hold down while adjusting
with minus / plus buttons
ECL Comfort 300 quick guideECL Comfort 300 quick guide
Temperature / Mode selectionTemperature / Mode selection
A
–B
–C
–1
–2
–3
–4
A
B
C
Arrow
buttons
change display
(move between
the lines on the
ECL Card)
Shift button moves
between items in the
display
Minus and plus
buttons adjust values
or time
Mode selector changes
the mode of operation
Circuit
selector
changes
between
heating (I) and
DHW (II) circuits
Selecting mode
Manual operation
Scheduled operation
Comfort temperature
Setback temperature
Standby
Push to change the
mode of the controller
The arrow indicates comfort
or setback temperature
during scheduled operation
Adjusting the temperature
of the current heating period
Outdoor
temperature
Room / DHW
temperature
913-
20
Desired temperature
Push to adjust up
or down
Adjusting the temperature
of the other mode
Hold down while adjusting
with minus / plus buttons
Changing comfort
Changeover time
00
6
0 3 6 9 12 15 18 21 24
Select changeover time
Adjust backward or forward
Removing a period
Push both at the same time
for 2 seconds
Checking your schedules
1
2
4
3
Push to move between week
day, weekend or single day
schedules
Return to display A, B or C
Adding an extra period
New period
0 3 6 9 12 15 18 21 24
Push both at the same time
Adjust the first changeover
time
Shift to second changeover
time and adjust
Restoring factory set schedules
Push both at the same
time for 2 seconds
Heat curve
-20 -10 0 10 20-30
20
30
40
50
60
70
80
90
1.0
1.4
0.6
0.2
1.8 2.2 3.0 3.4
100
110
2.6
10
o
C
o
C
You can set the heat curve slope in a
range from 0.2 to 3.4.
The slope is factory-set to 1.0.
Comfort periods / SchedulesComfort periods / Schedules
Changing comfort
Changeover time
00
6
0 3 6 9 12 15 18 21 24
Select changeover time
Adjust backward or forward
Removing a period
Push both at the same time
for 2 seconds
Adding an extra period
New period
0 3 6 9 12 15 18 21 24
Push both at the same time
Adjust the first changeover
time
Shift to second changeover
time and adjust
Restoring factory set schedules
Push both at the same
time for 2 seconds
Checking your schedules
1
2
4
3
Push to move between week
day, weekend or single day
schedules
Return to display A, B or C
Mondays
Tuesdays
Wednesdays
Thursdays
etc.…
Mondays
Tuesdays
Wednesdays
Thursdays
etc.…
Heat curve
-20 -10 0 10 20-30
20
30
40
50
60
70
80
90
1.0
1.4
0.6
0.2
1.8 2.2 3.0 3.4
100
110
2.6
10
o
C
o
C
You can set the heat curve slope in a
range from 0.2 to 3.4.
The slope is factory-set to 1.0.
  • Page 1 1
  • Page 2 2

Danfoss ECL Comfort 300, F11 User guide

Type
User guide

Danfoss ECL Comfort 300, F11 is designed to provide an easy and intuitive way to control your heating and domestic hot water (DHW) systems. With its user-friendly interface and range of features, you can tailor your comfort settings to your specific needs.

Easily adjust the temperature of your heating and DHW circuits, and select between manual operation, scheduled operation, comfort temperature, setback temperature, and standby mode. You can also check your schedules, add extra periods, and even restore factory set schedules.

For added flexibility, the ECL Comfort 300, F11 allows you to set the heat curve slope, which determines how quickly your system responds to changes in outdoor temperature. This ensures optimal comfort and energy efficiency.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI