SKYTEX SP 1026 Operating instructions

SKYTEX
Brand
SKYTEX
Model
SP 1026
Type
Operating instructions

This manual is also suitable for

SKYPAD SP1026 Firmware Instructions
Component
Requirement
Operating System Firmware Upgrades: Windows XP (32bit or 64-bit), Windows Vista (32-bit
or 64-bit), Windows 7 (32-bit or 64-bit), Windows 8 (32-bit or 64-bit) are
supported. Linux and Mac OS X supported for transferring files.
Memory
Minimum RAM required by the Operating System.
Hard Disk 4.0 gigabyte (GB) available disk space.
Display 800 x 600 or higher-resolution monitor
Additional USB 2.0 Port support
Tools Needed:
• SP1026 Tablet
• Micro-USB to USB Cable
• SP1026 Firmware Tool (Flash Tool) and Firmware Images
• Laptop or Computer running Windows XP, Vista, 7, 8, or 10
1. After downloading your firmware for your device from our website, save it to your desktop or
anywhere where you can easily locate it later.
2. After the download is completed, unzip/extract the download -> after unzipping the download
you will be presented with 3 Folders (Drivers, Firmware, and FlashTool)
3. Once extracted, you may plug in your device into your Laptop/Computer using the Micro-USB
to USB cable. Then navigate through the AutoDriver_Installer folder by double-clicking the
folder. Once you are within the Driver_Auto_Installer folder, right-click onto the “Install” file and
select “Run as administrator” to install the required driver.
4. Once the driver has been successfully installed, return back to the SP1026 Firmware folder.
5. Then open up the FlashTool folder by double-clicking it until you see the “flash_tool.exe” file.
We will now want to open this by double-clicking onto the “flash_tool” program (we recommend
running this program as administrator with OS Windows 7, 8, and 10).
6. You will now want to search for the scatter file which contains the instructions for your firmware
image files. Click on the “Scatter-loading” button to browse for the scatter file.
7. Browse back to your original SP1026 Firmware Folders and locate the
SP1026_Firmware_123022015 folder which will contain your scatter file. Once the you see the
file MT8127_Android_scatter, click on the file and select the “Open button”
8. Finally, once the scatter file has loaded all the required image files, click on the Download
button to begin flashing your device.
9. Once the download has completed, you may unplug your device from your Laptop/Computer
and power on your device.
  • Page 1 1
  • Page 2 2
  • Page 3 3

SKYTEX SP 1026 Operating instructions

SKYTEX
Brand
SKYTEX
Model
SP 1026
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents