Troubleshooting
-Recovery mode Function. TAB76
How to enter in recovery mode.
Please follow these steps.
Then long-press the “ON-OFF” key and “VOL+” Key at the same time until the Android doll has appeared, pls try it.
With “vol –“ key select “wipe data / factory reset” then press “Power” and then select “Yes delete all user data”with
the “vol-“ key.
Then press “power” again. The unit will then begin the recovery mode.
When it finishes select “reboot system now” press the “power button” and the unit will re-start itself. (this process
may last for a few minutes)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
How to download the software using the unit.
IMPORTANT: When you download the software, all data will be deleted as photos, videos and Apps that you
have been installed.
Do not interrupt this process please make sure the battery is fully charged.
Please, follow these steps.
1- Open browser and search and open this link: http://www.sunstech.es/download/
2- Select the model of the tablet that you have and download the software.(This software is installed In the INTERNAL SD).
3- When it finished the download, select the App " update " in your unit.
4-Select "Local Update", "download".
5-Select the software / Download and wait until the process is finished.
22