Pulsar HPSB2512B Operating instructions
- Category
- Power adapters & inverters
- Type
- Operating instructions
HPSB 2512B
v.1.0/VII
HPSB 13,8V/2A/7Ah Buffer, switch mode power supply unit
CODE:
TYPE:
DESCRIPTION
A buffer PSU intended for uninterrupted supply to devices that require stabilised voltage of The
PSU provides voltage of with output current of In case of power decay, a
battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy
efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 7Ah/12V battery. A micro
switch indicates door opening (front cover).
12V DC (+/-15%).
U=13,8V DC I=2A + 0,5A for battery charging . *
*
*
*
During normal operation, the total current drawn by the equipment may not exceed I = 2 A .
Maximum battery charging current: 0.5 A .
Total device current + battery: 2.5 A max .
EN**
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
Pulsar
®
HPSB series power supply unit
Buffer, switch mode power supply unit 13,8V DC
Features:
· DC 13,8V/2A uninterruptible power supply*
· fitting battery: 7Ah/12V
· wide range of mains supply: 176÷264V
· high efficiency 74%
· battery charging and maintenance control
· excessive discharging (UVP) protection
· battery charge current 0,5A
· battery output full protection against short-
circuit and reverse polarity connection
· LED indication
· protections:
· SCP short-circuit protection
· OVP overvoltage protection
· overvoltage protection (output AC)
· against sabotage
· overload protection (OLP)
· warranty – 2 year from the production date
* Refer to chart 1
W D
W
H
D
SPECIFICATIONS
PSU type A (EPS - External Power Source)
Mains supply 176÷264V AC 50÷60Hz
Current up to 0,45A@230VAC
Supply power 35W max.
Efficiency 74%
Output voltage 13,8V DC – buffer operation
9,5V÷13,8V DC – battery-assisted operation
Output current t
AMB
<30°C 2A + 0,5A battery charge- refer to chart 1
Output current t
AMB
=40°C 1,4A + 0,5A battery charge - refer to chart 1
Voltage adjustment range 12÷14VDC
Ripple 120mV p-p max.
Battery charge current 0,5A max. @ 7Ah (± 5%)
Short-circuit protection SCP electronic, automatic return
Overload protection OLP 105-150% of the PSU power, automatic return
Battery circuit protection SCP and
reverse polarity connection
PTC polymer fuse
Surge protection varistors
Overvoltage protection OVP >16V (automatic recovery)
Excessive discharge protection UVP U<9,5 V (± 5%) – disconnect of connection battery
Sabotage protection:
- TAMPER output indicating
enclosure opening
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
LED indication Yes
Operating conditions 2nd environmental class, -10
o
C÷40
o
C
Enclosure Steel plate DC01, thickness: 0,7mm, colour: RAL 9003
Enclosure dimensions 250 x 250 x 80+8 [mm] (WxHxD)
Net/gross weight 1,7 / 1,9 kg
Fitting battery 7Ah/12V (SLA) max.
160x90x75mm (WxHxD) max
Closing Cheese head screw x 2 (at the front), (lock assembly possible)
Declarations, warranty CE, RoHS, 2 year from the production date
Notes The enclosure does not adjoin the assembly surface so that cables
can be led.
Convectional cooling.
Connectors: Power-supply: Φ0,63÷2,5
Battery output BAT: 6,3F-2,5.
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
CHART 1. Acceptable output current from the
PSU depending on ambient temperature.
Pulsar
®
HPSB series power supply unit
Buffer, switch mode power supply unit 13,8V DC
Optional configurations:
Buffer power supply unit 13,8V/2x1A/7Ah.HPSB
- HPSB2512B + LB2 2x1A (AWZ585, AWZ586) + 7Ah
Buffer power supply unit 13,8V/4x0,5A/7Ah.HPSB
- HPSB2512B + LB4 4x0,5A (AWZ574, AWZ576) + 7Ah
Buffer power supply unit 13,8V/12V/2x1A/7Ah.HPSB
- HPSB2512B + RN250 (13,8V/12V) + LB2 2x1A (AWZ585,
AWZ586) + 7Ah
Buffer power supply unit 13,8V/12V/4x0,5A/7Ah.HPSB
- HPSB2512B + RN250 (13,8V/12V) + LB4 4x0,5A (AWZ574,
AWZ576) + 7Ah
Buffer power supply unit HPSB 13,8V/2x5V÷7,4V/2x2A/7Ah.
- HPSB2512B + DCDC20 x 2 pcs (2x 2A) + 7Ah5V÷7,4V/2x
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
AC
DC
DC
DC
DC
DC
Battery
7Ah
230V
5V÷7.4V/2A
5V÷7.4V/2A
13.8V
13.8V
HPSB2512B
DCDC20
DCDC20
AC
DC
Battery
7Ah
230V
13.8V
13.8V
13.8V
HPSB2512B
LB4
4x0,5A
AC
DC
Battery
7Ah
230V
13.8V
13.8V
12V
13.8V
12V
HPSB2512B LB2RN250
12V
2x1A
AC
DC
Battery
7Ah
230V
13.8V
13.8V
12V
13.8V
12V
HPSB2512B
LB4
RN250
12V
4x0,5A
Buffer power supply unit 13,8V/12V/2A/7Ah.HPSB
- HPSB2512B + RN250 (13,8V/12V) + 7Ah
AC
DC
Battery
7Ah
230V
13.8V
13.8V
13.8V
12V/2A
HPSB2512B RN250
12V
AC
DC
Battery
7Ah
230V
13.8V
13.8V
13.8V
HPSB2512B
LB2
2x1A
Pulsar
®
HPSB series power supply unit
Buffer, switch mode power supply unit 13,8V DC
-
1
-
2
-
3
Pulsar HPSB2512B Operating instructions
- Category
- Power adapters & inverters
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pulsar HPSB2512B - v1.0 Operating instructions
-
-
-
-
-
-
-
-
-
