Consew 277R User manual

Brand
Consew
Model
277R
Type
User manual

This manual is also suitable for

Consew 277RFS is a suitable solution for various kinds of tape stitching with an edge binder. It has a range of capabilities including:

  • Maximum sewing speed of 3,000 stitches per minute with a needle size of DPx17, #16-#23 or +#18.
  • Stitch length adjustment up to a maximum of 5 mm.
  • Drop and needle feed mechanism with walking foot and reverse stitch capability.
  • Alternating presser feet with a stroke of 7 mm by hand or 10 mm by knee lifter.
  • Semi-automatic lubrication system for smooth operation.
  • Compact design with a small footprint, making it suitable for use in limited workspaces.
  • Uses synthetic thread sizes 50-#80.

Consew 277RFS is a suitable solution for various kinds of tape stitching with an edge binder. It has a range of capabilities including:

  • Maximum sewing speed of 3,000 stitches per minute with a needle size of DPx17, #16-#23 or +#18.
  • Stitch length adjustment up to a maximum of 5 mm.
  • Drop and needle feed mechanism with walking foot and reverse stitch capability.
  • Alternating presser feet with a stroke of 7 mm by hand or 10 mm by knee lifter.
  • Semi-automatic lubrication system for smooth operation.
  • Compact design with a small footprint, making it suitable for use in limited workspaces.
  • Uses synthetic thread sizes 50-#80.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Consew 277R User manual

Brand
Consew
Model
277R
Type
User manual
This manual is also suitable for

Consew 277RFS is a suitable solution for various kinds of tape stitching with an edge binder. It has a range of capabilities including:

  • Maximum sewing speed of 3,000 stitches per minute with a needle size of DPx17, #16-#23 or +#18.
  • Stitch length adjustment up to a maximum of 5 mm.
  • Drop and needle feed mechanism with walking foot and reverse stitch capability.
  • Alternating presser feet with a stroke of 7 mm by hand or 10 mm by knee lifter.
  • Semi-automatic lubrication system for smooth operation.
  • Compact design with a small footprint, making it suitable for use in limited workspaces.
  • Uses synthetic thread sizes 50-#80.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents