Meridian UHD722 Quick start guide

Type
Quick start guide

Meridian UHD722 is a versatile HDMI controller and processor that allows you to connect multiple HDMI sources to your display devices. It features HDMI inputs for connecting various sources like DVD players, gaming consoles, and satellite receivers. The UHD722 also offers multiple HDMI outputs, including one that supports UHD resolution, enabling you to connect it to multiple displays simultaneously. Additionally, it provides audio outputs for connecting to your surround sound system or a conventional digital audio input.

Meridian UHD722 is a versatile HDMI controller and processor that allows you to connect multiple HDMI sources to your display devices. It features HDMI inputs for connecting various sources like DVD players, gaming consoles, and satellite receivers. The UHD722 also offers multiple HDMI outputs, including one that supports UHD resolution, enabling you to connect it to multiple displays simultaneously. Additionally, it provides audio outputs for connecting to your surround sound system or a conventional digital audio input.

GETTING STARTED
1. CONNECT TO THE DISPLAY DEVICE(S)
HDMI Output
HDMI Out 2 HDMI Out 1
Plug the HDMI cable which is
feeding the primary display device
into the socket HDMI Out 1. If a
second display device is being used,
plug its HDMI cable into HDMI
Out 2. Note: Only the HDMI Out 1
socket supports UHD.
2. CONNECT THE AUDIO OUTPUT
If the UHD722 is being used with a Surround Controller
which features an MMHR input on an RJ45-type socket:
SpeakerLink Out
MMHR Output
Use a network-type cable to connect
from the MMHR output on the
UHD722 to the MMHR input on
the Surround Controller. A Meridian
SpeakerLink lead is ideal.
If the UHD722 is being used with a Surround Controller
with a Smartlink multichannel input on three RCA sockets:
Smartlink
1/2 5/6
3/4 7/8
Use three digital interconnect cables
to connect as follows:
Socket 1/2: Main L/R
Socket 3/4: C/LFE
Socket 5/6: SURR
If the UHD722 is being used with a product with neither of
these:
Configure the UHD722 to use a
single co-axial digital connection
to a conventional digital audio
input. Refer to the User Guide for
information about how to do this.
INPUTS GUIDE
The UHD722 is supplied with its HDMI inputs mapped to sources
as follows:
INPUT
H1 H2 H3 H4 H5 H6 H7
SOURCE
DVD TV Cable Sat VCR1 Game Disc
You can change the mappings to suit the system requirements using
a PC running the Meridian Configuration Application. For more
information see the User Guide.
FURTHER INFORMATION
To access the comprehensive
Meridian UHD722 User Guide,
FAQs, and further product support,
please visit:
meridian-audio.com/UHD722
HDMI Input HDMI Output
H5 VCR1
H6 GameH7 Disc H4 Sat H3 Cable H2 TV H1 DVD HDMI Out 2 HDMI Out 1
Smartlink
1/2 5/6
3/4 7/8
SpeakerLink OutRS232
MMHR Output
HDMI sources
HDMI
video outputs
MMHR
output
Smartlink
outputs
Fuse
Power On/Off
RS232
SpeakerLink
output
U H D 7 2 2 H D M I P r o c e s s o r
2
3
4 5
6
7
1
Illuminated touch keys
for source selection
Illuminated touch key
for standby/on
3. CONNECT COMMS TO OTHER MERIDIAN PRODUCTS
If you have other Meridian equipment in the system, and an
unused SpeakerLink input is available:
SpeakerLink Out
MMHR Output
Use a network-type cable to connect
the SpeakerLink Out socket on the
UHD722 to the available SpeakerLink
input.
If there are no SpeakerLink inputs available on the other
products:
SpeakerLink Out
MMHR Output
Use the Meridian Comms Adapter
supplied with the UHD722.
Connect to the adapter using a
network-type cable plugged into
the SpeakerLink Out socket on the
UHD722.
The adapter provides a DIN
connection so that a Meridian 5C
cable can be used to connect to
an appropriate Comms socket on
another Meridian product.
4. CONNECT THE HDMI SOURCES
HDMI Input
H5 VCR1
H4 Sat
Plug the HDMI cables from the
source products into the input
sockets. By default, the input sockets
are mapped to sources as labelled on
the back panel of the UHD722; see
INPUTS GUIDE opposite.
5. POWER UP THE UHD722
Connect the supplied power cable
and switch on the power.
ZONE CONTROLLER
QUICK START
GUIDE
UHD722
HDMI PROCESSOR
IP20 EQUIPMENT
CLIMATE
The equipment has been designed for use in moderate climates and
in domestic situations.
Only use at an altitude not exceeding 2000m .
≤2000m
SAFETY WARNINGS
Do not expose the unit to dripping or splashing.
Do not place any object filled with liquid, such as a vase, on the unit.
Do not place naked flame sources, such as lighted candles, on the
unit.
TO AVOID OVERHEATING
Do not position the product in direct sunlight.
Do not position the product near heat sources, such as a radiator.
Leave at least 10cm around the product to ensure sufficient
ventilation.
TO AVOID INTERFERENCE
Do not position the unit near strong electrical or magnetic
radiation, such as near a power amplifier.
RADIO INTERFERENCE
FCC Warning: This equipment generates and can radiate radio
frequency energy and if not installed and used correctly in accordance
with our instructions may cause interference to radio communications
or radio and television reception. It has been type-tested and complies
with the limits set out in Subpart J, Part 15 of FCC rules for a Class B
computing device. These limits are intended to provide reasonable
protection against such interference in home installations.
EEC: This product has been designed and type-tested to comply with
the limits set out in EN55032:2015 and EN55024:2010 + A1:2015.
VISIT US ON THE WEB
www.meridian-audio.com
Copyright © 2018 Meridian Audio Ltd.
Part no: P88460
IMPORTANT SAFETY INSTRUCTIONS
Read the instructions.
Keep these instructions.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Install only in accordance with the manufacturer’s instructions.
Refer all servicing to approved service personnel.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
This apparatus has been designed with Class 1 construction and
must be connected to a mains socket outlet with a protective earthing
connection (the third grounding pin).
This apparatus uses a single-pole power switch. As a result it is
not isolated from AC mains power when switched off at the rear
panel. The apparatus may be isolated from mains power either by
unplugging the power connector from the rear of the unit, or by
unplugging the connector at the opposing end of the power cord
or cable from its supply outlet. As a result, either or both of these
connectors should remain accessible.
SAFETY WARNINGS
WARNING!
RISK OF ELECTRIC SHOCK – DO NOT OPEN
ATTENTION!
NE PAS OUVRIR – RISQUE DE DÉCHARGE ÉLECTRIQUE
Caution: to reduce the risk of electric shock, do not remove cover.
No user serviceable parts inside. Refer servicing to qualified service
personnel.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
  • Page 1 1
  • Page 2 2

Meridian UHD722 Quick start guide

Type
Quick start guide

Meridian UHD722 is a versatile HDMI controller and processor that allows you to connect multiple HDMI sources to your display devices. It features HDMI inputs for connecting various sources like DVD players, gaming consoles, and satellite receivers. The UHD722 also offers multiple HDMI outputs, including one that supports UHD resolution, enabling you to connect it to multiple displays simultaneously. Additionally, it provides audio outputs for connecting to your surround sound system or a conventional digital audio input.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI