Automate 477A Owner's manual

Brand: Automate

Model: 477A

Type: Owner's manual

Automate 477A is a 2-Way LCD Remote Control that can be programmed to your vehicle's security system. It features a standard configuration with separate buttons for arming and disarming, as well as an AUX button for trunk release or channel 2 operation. The star button operates the remote start function. The remote is easy to program and use, and it provides a convenient way to control your vehicle's security system from a distance.

Automate 477A is a 2-Way LCD Remote Control that can be programmed to your vehicle's security system. It features a standard configuration with separate buttons for arming and disarming, as well as an AUX button for trunk release or channel 2 operation. The star button operates the remote start function. The remote is easy to program and use, and it provides a convenient way to control your vehicle's security system from a distance.

MODEL

477A

Compatible with the

following systems.

Automate AM9

Replacement Transmitter

REPLACEMENT TRANSMITTER

Model 477A 2-Way LCD Remote Control

The following Learn Routine can be used to program this replacement transmitter to the system.

FCC/ID Notice

This device complies with Part 15 of FCC rules.

Operation is subject to the following conditions:

(1) This device may not cause harmful interference,

and (2) This device must accept any interference

received, including interference that may cause

undesired operation.

CAUTION! Changes or modifications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate this device.

To enter the learn routine:

1. Open a door.

2. Turn the key to the ON position.

3. Within 5 seconds press and release the Control

Center button, and then press and Hold.

The LED flashes one time and the siren/horn (if

connected) sounds to confirm the vehicle is ready

for remote learning.

4. Continue holding the Control Center button.

5. Press and release the Lock button on the remote

control. The siren/horn sounds to confirm the

remote has been succesfully programmed.

6. Release the Control Center button and turn off

the ignition. The siren/horn sounds to confirm pro-

gramming is exited.

Standard Configuration

A remote programmed to a standard configuration

uses separate buttons for arm and disarm, similar

to a factory system.

The lock button Arms and Locks the

system.

The Unlock button Disarms and Unlocks the

system.

The AUX button operates Trunk Release/

Channel 2.

The star button operates the Remote Start.

For more details refer to the Owner's Guide.

WWW.DIRECTED.COM

MADE IN TAIWAN

© 2019 Directed. Vista, CA 92081. All rights reserved.

P/N 477A

01/19

WARNING: This product can expose you to

chemicals including DEHP, which is known to the State

of Califotrnia to cause cancer and birth defects or

other reproductive harm. For more information, go to

www.P65Warnings.ca.gov

560-0036 (R1.0)

1
2

Automate 477A Owner's manual

Brand: Automate

Model: 477A

Type: Owner's manual

Automate 477A is a 2-Way LCD Remote Control that can be programmed to your vehicle's security system. It features a standard configuration with separate buttons for arming and disarming, as well as an AUX button for trunk release or channel 2 operation. The star button operates the remote start function. The remote is easy to program and use, and it provides a convenient way to control your vehicle's security system from a distance.

Related papers

Other documents