Fantech Compact Cooler CC Serie Assembly Instructions

Brand: Fantech

Model: Compact Cooler CC Serie

Type: Assembly Instructions

Part No.: INST-CC 08/12 Page 1 of 3

1. Remove the lock nuts and washers from the

axle’s bolts (Fig. A).

With one washer remaining on the bolt, slide

the wheel on and then replace the washer and

lock nut.

Note: Ensure that wheels are able to rotate

freely after lock nuts are tightened.

Fit the black wheel caps (included in

hardware bag) firmly to the wheels.

2. Assemble Axle section (Fig. B) to main

Frame by matching up the holes in the axle to

the holes in the frame, then fix in place by

using 2 off 10x50mm bolts, 4 off 10mm

washers and 2 off 10mm nyloc nuts.

3. Place 1 washer over each of the mounting

bracket bolts (Fig. B) and then feed the bolts

through the holes in the frame. Use a washer

and nyloc nut to fix the bracket to the handle

side of the frame. Use a washer and the

clamping lever to fix the bracket to the axle

side of the frame.

4. Rotate the Mounting brackets (Fig. C) so that

the bracket holes are in the vertical position.

Align the fan so that:-

• the fan impeller is towards the top,

• the Junction box is towards the axle side

and

• the power lead points towards the

mounting bracket.

Slide the fan in between the two brackets,

making sure that the brackets are on the

outside of the fan’s flange.

Fix them in place using 4 off 10x20mm bolts,

8 off 10mm washers and 4 off nyloc nuts.

5. Once all 4 nuts are done up tightly (Fig. D),

turn the fan to the required angle. The

clamping lever on the axle side of the frame

can be loosened to assist the turning of the fan

and then tightened at the required angle.

List of contents and Safety instructions are on

the reverse side!

Assembly Instructions for

Compact Cooler CC Series

Part No.: INST-CC 08/12 Page 2 of 3

List of Contents Tools required for Frame

assembly

- 1 off Fan Assembly

- 4 off 10 x 20mm Bolts

- 1 off 16mm Spanner for 10mm bolts

- 1 off Main Frame

- 2 off 10 x 50mm Bolts

- 1 off 17mm Spanner for 10mm Nyloc

nuts

- 1 off Axle

- 15 off 10mm Washers

- 1 off 19mm Spanner for ½” Nyloc nuts

- 2 off Mounting

Brackets

- 7 off 10mm Nyloc

Nuts

- 1 off Clamping Lever

- 4 off 12mm Washers

- 2 off Wheels

- 2 off ½” Nyloc Nuts

- Assembly Instruction

Safety Instructions

READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE

PRODUCT, KEEP THEM HANDY FOR FUTURE REFERENCE.

1. Always operate the Fan from a power source of the same Voltage, Frequency and

Rating as indicated on the Product Label.

2. This Fan must only be plugged into an approved socket, which is Earthed in

accordance with the Local Electrical Supply Regulations.

3. The Fan must be assembled as per instructions, as the airflow MUST be in the

direction as shown in Fig.D of the assembly instructions. The stabilizing foot on the

stand must be on the inlet side of the fan. Failure to ensure this may allow the

product to become unstable during operation.

4. This fan has a replaceable in-line fuse for motor protection. If fuse continually blows,

switch the fan off immediately and return the complete unit to the manufacturer or

service agent, for repair.

5. Always switch off and unplug the Fan from the supply when maintenance or

cleaning is to be carried out.

6. Do not operate the Fan with either guard removed.

7. Do not move the Fan by pulling the supply cable.

8. Do not operate the Fan with a damaged Cord or Plug, or after the product

malfunctions, or is dropped, or appears damaged in any manner. Return the

complete Fan immediately to the manufacturer or service agent, for repair.

9. When cleaning, Do Not hose or apply high pressure water to the motor or electrics,

simply wipe down with a moist cloth or brush.

10. Always operate the Fan on a dry, level surface.

11. This product is not intended for use by young children or infirm persons without

supervision.

Failure to follow the above safety instructions could result in abnormal operation,

fire, electric shock or injury.

Part No.: INST-CC 08/12 Page 3 of 3

Fantech Compact Cooler CC Serie Assembly Instructions

Fantech Compact Cooler CC Serie Assembly Instructions

Fantech Compact Cooler CC Serie Assembly Instructions

Other documents