2. POWERTEX
  3. Wire Rope U-Bolt Clip Type PC741

POWERTEX Wire Rope U-Bolt Clip Type PC741 Operating instructions

  • Hello, I'm your chat assistant. I have reviewed the user manual for the POWERTEX Wire Rope U-bolt Clip PC741. This document provides crucial fitting instructions, including clip placement and spacing, specified in accordance with DIN 741. I'm ready to answer any questions you may have about the device and its proper usage.
  • Where should the first clip be mounted?
    Where should the U-bolt be positioned?
    What is the minimum distance between other clips?
Fitting instruction for use Wire Rope U-bolt Clip PC741
First clip to be mounted as close to the pointed thimble as possible.
The U-bolt to be positioned on the rope’s free end.
The other clips are to be mounted with a minimum distance equal to
the width of the clip (c).
c
Size of clip (mm) Min. number of clips needed acc. to DIN 741
Up to 7 3
Over 7 up to 16 5
Over 16 up to 20 6
Over 20 up to 26 7
Over 26 up to 40 8
/