Kiddiecare TABLE & 2 CHAIRS Assembly Instructions

Brand
Kiddiecare
Model
TABLE & 2 CHAIRS
Type
Assembly Instructions
1
Your assembly instructions and user guide for the
TABLE & 2 CHAIRS
IMPORTANT! READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
You will need these instructions after assembly.
Contents
Page
1. Parts List 2
2. Assembly instructions 3
3. Choosing the mattress 6
4. Guide for safe use 6
5. Cleaning & Maintenance instructions 6
Kiddiecare.com
Club Way, Hampton,
Peterborough,
Cambridgeshire,
PE7 8JA
2
1. PARTS LIST
All the parts and tool you need to assemble the Table and 2 Chairs are provided. Before assembling please check
that you have all the parts listed below. If any parts are missing please contact your retailer.
Fixings
1. Allen wrench x 1
2. Bolt x 12
3. Barrel nut x 12
4. Wooden dowels x 12
1 2 3 4
A
C
Parts for the Table
A Table Legs x 2
B Table brace x 2
C Table top x 1
B
E
D
G
Parts for the 2 Chairs
D Chair back x 2
E Chair brace x 4
F Chair front legs x 2
G Chair seat x 2
F
3
2. ASSEMBLY INSTRUCTIONS
Tools required: Allen wrench (provided). Flat head screw driver (not provided).
Note: It is recommended that assembly and dismantling is carried out away from young children
ASSEMBLY OF THE TABLE
Insert wooden dowels (4) into ends of table brace (B). Attach the brace to the table legs (A) ensuring that the
grooves on the brace are aligned with the grove on the table legs. Insert a barrel nut (3) into the hole on the side of
the table brace and align the slot on the end of the barrel nut with the hole in the brace with the screwdriver. Insert
the bolt (2) through the back of the table leg into the hole containing the barrel nut on the table brace. Using the
Allen wrench (1), screw the bolt into the barrel nut.
Repeat this procedure attaching a second table brace to the other side of the table legs.
Slide the table top (C) into the grooves on the braces so that it slots into the groove on the table legs. Make sure the
white top of the table surface will be facing up when the table is assembled.
Attach the other pair of table legs (A) to the ends of the braces using the wooden dowels barrel nuts and bolts as
described in the first paragraph above. Make sure the table top (C) edge slots into the groove on the table legs.
Tighten all four bolts (do not over tighten).
4
C
1
2
3
A
4
ASSEMBLY OF THE CHAIRS
Insert wooden dowels (4) into ends of chair brace (D). Attach the brace to the chair back (E) ensuring that the
grooves on the brace are aligned with the grove on the chair back. Insert a barrel nut (3) into the hole on the side of
the chair brace and align the slot on the end of the barrel nut with the hole in the brace with the screwdriver. Insert
the bolt (2) through the back of the chair back into the hole containing the barrel nut on the chair brace. Using the
Allen wrench (1), screw the bolt into the barrel nut.
Repeat this procedure attaching a second chair brace to the other side of the chair back.
Slide the chair seat (G) into the grooves on the braces so that it slots into the groove on the chair back. Make sure
the white top of the seat surface will be facing up when the chair is assembled.
Attach the front chair legs (F) to the ends of the braces using the wooden dowels barrel nuts and bolts as described
in the first paragraph above. Make sure the seat (G) edge slots into the groove on the front chair legs.
Tighten all four bolts (do not over tighten).
Assemble the second chair the same way.
DISASSEMBLING THE TABLE AND CHAIRS
Using the Allan wrench (1) loosen and remove all the bolts (2). Carefully separate the components, taking care not
to damage the wooden dowels (4).
4
D
2
3
E
G
1
5
4. GUIDE FOR SAFE USE
The Table and Chairs are suitable for young children up to a maximum weight of 20 kg when supervised by an
adult. They are designed for young children to sit on the chairs and to carry out activities such as drawing, reading
etc. They are not suitable for use out of doors as the ground conditions may not be level or they may become wet.
WARNING: Children using the Table and Chairs must always be supervised by an adult.
Ensure that children do not climb onto the Table and Chairs or use them for
other purposes they are not designed for as this may result in serious injury.
Not suitable for use by children exceeding the maximum recommended weight
limit.
5. CLEANING & MAINTENANCE INSTRUCTIONS
The Table and Chairs may be cleaned by wiping the top surfaces with a damp cloth and drying with a soft clean
cloth.
Do not wipe or dampen the underside of the table or seat as this will weaken the seating or table
surface.
Do not use abrasives, bleach, alcohol or ammonia-based household polishes.
All assembly fittings should always be tightened properly and checked regularly and retightened as necessary.
Loose fixings may snag a child’s clothing or pinch fingers or flesh.
Spare or replacement parts can be obtained from Little Acorns by phoning 01952 461148.
WARNING: Do not use the Table and Chairs if any part is broken, cracked or missing. Use
only spare or replacement parts approved by the manufacturer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Kiddiecare TABLE & 2 CHAIRS Assembly Instructions

Brand
Kiddiecare
Model
TABLE & 2 CHAIRS
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents