Wallenstein WX410 Operating Instructions And Parts Manual
- Type
- Operating Instructions And Parts Manual
2
Warranty
This product is warranted to be free of defects in materials and work-
manship under normal use and service, for a period of two years from
the date of purchase, when operated and maintained in accordance
with the Operating and Maintenance Instructions supplied with this unit.
This warranty does not cover misuse or negligence. Units used for
commercial or rental use are covered by warranty for one year.
Under no circumstances will the manufacturer be liable for any conse-
quential damage or expense of any kind, including loss of profits. The
manufacturer is under no circumstances liable for tractor damage of
any kind. The manufacturer is not liable for the maintenance of the
product.
This warranty is extended only to the original purchaser. Warranty is
void if repairs are attempted by anyone other than an Authorized Ser-
vice Centre.
If a difficulty develops with the product, you should contact your nearest
Authorized Repair Centre, or distributor. Only these locations are au-
thorized to make repairs to the product or affect the replacement of de-
fective parts, which will be done at no charge within a reasonable time
after the receipt of the product. Units or parts should be returned at the
customer’s expense to the nearest repair location or Authorized Service
Centre. Pack unit in a strong carton and pad tightly to avoid damage.
Damage in-transit is not covered by warranty. Include original purchase
receipt with any claim (keeping a copy for your files).
The distributor’s liability under warranty is limited to repair of the prod-
uct and/or replacement of parts and is given to the purchaser in lieu of
all other remedies including incidental and consequential charges.
There are no warranties, expressed or implied other than those speci-
fied herein. Contact your selling dealer for warranty repairs,
EMB MFG INC.
4144 Boomer Line,
St. Clements, Ontario
N0B 2M0 Canada
Phone: 519-699-9283
Fax: 519-699-4146
Email: [email protected]
Website: www.embmfg.com
Warranty
This product is warranted to be free of defects in materials and work-
manship under normal use and service, for a period of one year from
the date of purchase, when operated and maintained in accordance
with the Operating and Maintenance Instructions supplied with this unit.
This warranty does not cover misuse or negligence.
Under no circumstances will the manufacturer be liable for any conse-
quential damage or expense of any kind, including loss of profits. The
manufacturer is under no circumstances liable for tractor damage of
any kind. The manufacturer is not liable for the maintenance of the
product.
This warranty is extended only to the original purchaser. Warranty is
void if repairs are attempted by anyone other than an Authorized Ser-
vice Centre.
If a difficulty develops with the product, you should contact your nearest
Authorized Repair Centre, or distributor. Only these locations are au-
thorized to make repairs to the product or affect the replacement of de-
fective parts, which will be done at no charge within a reasonable time
after the receipt of the product. Units or parts should be returned at the
customer’s expense to the nearest repair location or Authorized Service
Centre. Pack unit in a strong carton and pad tightly to avoid damage.
Damage in-transit is not covered by warranty. Include original purchase
receipt with any claim (keeping a copy for your files).
The distributor’s liability under warranty is limited to repair of the prod-
uct and/or replacement of parts and is given to the purchaser in lieu of
all other remedies including incidental and consequential charges.
There are no warranties, expressed or implied other than those speci-
fied herein. Contact your selling dealer for warranty repairs.
EMB MFG INC.
4144 Boomer Line,
St. Clements, Ontario
N0B 2M0 Canada
Phone: 519-699-9283
Fax: 519-699-4146
Email: [email protected]
Website: www.embmfg.com
7
POSITION PART # DESCRIPTION QUANTITY
1 W1023 1/2" SWIVEL ELBOW 6
2 W1039 CYLINDER-- 4" BORE 24" STROKE 1
W1040 CYLINDER SEAL KIT, 4" CYL. 1
W1049 CYLINDER SHAFT 1
3 W1044 CYLINDER HOLDER PLATE- 3 HOLE 1
4 W1045 COMPLETE WEDGE KIT 1
5 W1041 WEDGE PLATE BOLTS-- 1/2" X 1 1/2 F.T. GR.8 2
6 W1102 1/2" X 96" HOSE 2
W4120 FOUR WAY SPLITTING WEDGE OPTIONAL
W1084 WEDGE TO CYLINDER BOLT- 3/8" X 2 1/2" 1
6
WX410 PARTS LIST
3
Safety Instructions
Keep hands, feet, and clothing away from engine and all mov-
ing parts.
Never allow your hands, arms, or legs to come between the
cutting edge of the woodsplitter and the moving block pusher.
Children and pets must be kept away from the area of operation
due to possible injury from falling wood or moving woodsplitter
components.
Confirm that all hydraulic lines, fittings, and couplers are tight
and not leaking before starting machine.
Never try to split wood crosswise. The wood may jump out and
cause serious injury.
Always be careful and concentrate fully while the woodsplitter is
in operation.
When towing, always be sure to use the safety chains and to
secure all safety locks.
Before each use, confirm that the woodsplitter is free of dam-
age and effects of misuse. Failure to keep the woodsplitter in
proper condition may lead to serious injury.
To avoid damage to splitter never use splitter as a boom when
lifting objects.
Valuable Information for Your Records
Date of Purchase: __________________________________
Dealer Where Purchased:
_________________________________________________________
_________________________________________________________
Woodsplitter Model Number: ________________________________
Woodsplitter Serial Number: ________________________________
Notes
4
SPECIFICATIONS
• UNIVERSAL SKIDSTEER MOUNT
• 14 TONS OF SPLITTING FORCE AT 2200 PSI
• 4” BORE, 24” STROKE CYLINDER
• OPERATES FROM OPERATORS SEAT
5
OPERATING INSTRUCTIONS
Before Starting
Before beginning operation of your woodsplitter be sure to read and
understand operating and safety instructions as outlined in the woods-
plitter and skidsteer operator’s manuals.
Starting Operation
Before operating the woodsplitter check skidsteer hydraulic oil level and
check to make sure woodsplitter wedge slide is free from all obstruc-
tions and debris. Never run inside without adequate ventilation as it will
cause carbon monoxide poisoning. Never permit a minor or incompe-
tent operator to operate machine.
Woodsplitter Operation
Connect skidsteer quickcouplers to skidsteer, to use splitter use skid-
steer auxillary hydraulics controlled from the operators seat. Position
splitter over log, extend cylinder using auxillary hydraulics. When log is
split move on and split next piece. To prevent damage to splitter always
keep sliding wedge mechanism free of all foreign material.
Maintenance
Maintenance of the woodsplitter is very easy. Always keep slide oper-
ating freely. Inspect hoses periodically to check for leaks.
-
1
-
2
-
3
-
4
Wallenstein WX410 Operating Instructions And Parts Manual
- Type
- Operating Instructions And Parts Manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Wallenstein WX450 User manual
-
-
-
-
-
-
-
-
-
