OSP Designs KAU320-RD Operating instructions

Brand
OSP Designs
Model
KAU320-RD
Type
Operating instructions

This manual is also suitable for

1. PARTS LIST
ASSEMBLY INSTRUCTIONS
UPPER CHAIR - 1 PC
ITEM CODE : IMS - 200320
TAHITI SWIVEL ROCKER CHAIR
REF CODE : TAH320-BK/TAH320-BL/TAH320-WHT/TAH320-GRY
KAUAI SWIVEL ROCKER CHAIR
REF CODE : KAU320-BL/KAU320-RD/KAU320-LIN
2. HARDWARE LIST
aa. M6 BOLTS
- 4 PCS
cc. FLAT WASHER
- 4 PCS
bb. SPRING WASHER
- 4 PCS
dd. SCREW DRIVER
- NOT PROVIDED
FRONT
BACK
a. SWIVEL ROCKER BASE- 1 PC b.
3. ASSEMBLY STEPS
3A. Align the FRONT &
BACK positions of Swivel
Rocker Hardware (b) &
bottom of Upper Chair (a).
X
FRONT
BACK
A
B
D
C
FRONT
BACK
A
B
D
C
D
C
B
A
A
A
A
A
bb
aa
cc
FRONT
POSITION
(THICKER SIZE)
BACK
POSITION
FRONT
BACK
D
C
B
A
FINISH
CUSHION - 1 PCc.
3B. Through the 4” hole underneath
the Swivel Rocker Base (b), align the first
hole (A) of Swivel Rocker Hardware to
the hole (A) of bottom Upper Chair (a),
and use (dd) Screw Driver (not provided)
to tighten hardware (aa) M6 Bolt, (bb)
Spring Washer, (cc) Flat Washer.
3C. Rotate the Swivel Rocker Base
(b), to align the next matching holes
(B, C & D) of Swivel Rocker Hardware
and bottom Upper Chair (a) and tighten
all the (aa) M6 Bolts, (bb) Spring
Washers and (cc) Flat Washers.
3D. After Assembly, stand the Rattan Swivel
Rocker Chair right up, and put the Cushion (c)
on, and then tighten all the Velcros on the
back of the Cushion to the Rattan Swivel
Frame.
dd
  • Page 1 1

OSP Designs KAU320-RD Operating instructions

Brand
OSP Designs
Model
KAU320-RD
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents