Motomaster 4-Stroke Lawnmower Engine Oil SAE 30 Owner's manual

Brand: Motomaster

Model: 4-Stroke Lawnmower Engine Oil SAE 30

Type: Owner's manual

Motomaster 4-Stroke Lawnmower Engine Oil SAE 30 is a high-quality oil engineered to protect your lawnmower engine from wear and tear. It is formulated with premium base oils and additives to provide excellent protection against wear, rust, and corrosion. Motomaster 4-Stroke Lawnmower Engine Oil SAE 30 also helps to keep your engine running smoothly and efficiently, even in extreme conditions.

Here are some of the benefits of using Motomaster 4-Stroke Lawnmower Engine Oil SAE 30:

Protects against wear, rust, and corrosion
Helps to keep your engine running smoothly and efficiently
Extends the life of your lawnmower engine

Here are some of the benefits of using Motomaster 4-Stroke Lawnmower Engine Oil SAE 30:

Protects against wear, rust, and corrosion
Helps to keep your engine running smoothly and efficiently
Extends the life of your lawnmower engine

SAFETY DATA SHEET

1. Identification

Product identifier

Other means of identification

Recommended use

MotoMaster 4-Cycle Lawnmower Engine Oil SAE 30

None.

Lubricant

None known.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Manufacturer

Irving Blending & Packaging

Address 555 Courtenay Bay Causeway

Company name

Telephone 1.800.574.5823

Emergency phone number 1.800.424.9300 (CHEMTREC)

E-mail

Canada

Not available.

Saint John, NB E2L 4E6

See above.

Supplier

2. Hazard identification

Not classified.

Physical hazards

Not classified.

Health hazards

Not classified.

Environmental hazards

Label elements

None.

Hazard symbol

Signal word None.

Hazard statement The mixture does not meet the criteria for classification.

Precautionary statement

Prevention Observe good industrial hygiene practices.

Response Wash hands after handling.

Storage Store away from incompatible materials.

Disposal Dispose of waste and residues in accordance with local authority requirements.

Other hazards None known.

Supplemental information Not applicable.

3. Composition/information on ingredients

Mixtures

Non hazardous by WHMIS Criteria.

Composition comments

4. First-aid measures

If symptoms develop move victim to fresh air. If symptoms persist, obtain medical attention.

Inhalation

Flush with cool water. Wash with soap and water. Obtain medical attention if irritation persists.

Skin contact

Flush with cool water. Remove contact lenses, if applicable, and continue flushing. Obtain medical

attention if irritation persists.

Eye contact

Rinse mouth with water, then drink one or two glasses of water. Do not induce vomiting. If vomiting

occurs naturally, have victim lean forward to reduce risk of aspiration. Never give anything by

mouth if victim is unconscious or is convulsing. Obtain medical attention.

Ingestion

Direct contact with eyes may cause temporary irritation.

Most important

symptoms/effects, acute and

delayed

Treat symptomatically.

Indication of immediate

medical attention and special

treatment needed

Ensure that medical personnel are aware of the material(s) involved and take precautions to

protect themselves.

General information

#32058 Issue date 11-May-2020

Page: 1 of 5

5. Fire-fighting measures

Water fog. Foam. Dry chemical powder. Carbon dioxide.

Suitable extinguishing media

Do not use water jet as an extinguisher, as this will spread the fire.

Unsuitable extinguishing

media

During fire, gases hazardous to health may be formed.

Specific hazards arising from

the chemical

May include and are not limited to: Oxides of carbon. Oxides of nitrogen. Oxides of sulphur. Oxides

of phosphorus.

Hazardous combustion

products

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

Special protective equipment

and precautions for firefighters

Move containers from fire area if you can do so without risk.

Fire fighting

equipment/instructions

Use standard firefighting procedures and consider the hazards of other involved materials.

Specific methods

No unusual fire or explosion hazards noted.

General fire hazards

6. Accidental release measures

Keep out of low areas. Keep unnecessary personnel away. Keep people away from and upwind of

spill/leak. Do not touch damaged containers or spilled material unless wearing appropriate

protective clothing.

Personal precautions,

protective equipment and

emergency procedures

Stop the flow of material, if this is without risk.

Large Spills: Dike the spilled material, where this is possible. Cover with plastic sheet to prevent

spreading. Absorb in vermiculite, dry sand or earth and place into containers. Use water spray to

reduce vapours or divert vapour cloud drift. Prevent entry into waterways, sewer, basements or

confined areas. Following product recovery, flush area with water.

Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to

remove residual contamination.

Never return spills to original containers for re-use.

Methods and materials for

containment and cleaning up

Avoid discharge into drains, water courses or onto the ground.

Environmental precautions

7. Handling and storage

Use good industrial hygiene practices in handling this material. Avoid contact with eyes, skin and

clothing. Do not handle until all safety precautions have been read and understood. Avoid

prolonged exposure.

Precautions for safe handling

Store in original tightly closed container. Keep away from heat, open flames or other sources of

ignition. Keep out of reach of children.

Conditions for safe storage,

including any incompatibilities

8. Exposure controls/Personal protection

No exposure limits noted for ingredient(s).

Occupational exposure limits

No biological exposure limits noted for the ingredient(s).

Biological limit values

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates

should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,

or other engineering controls to maintain airborne levels below recommended exposure limits. If

exposure limits have not been established, maintain airborne levels to an acceptable level.

Appropriate engineering

controls

Individual protection measures, such as personal protective equipment

Safety goggles or glasses.

Eye/face protection

Skin protection

Impervious gloves. Confirm with reputable supplier first.

Hand protection

Wear appropriate chemical resistant clothing.

Other

Where exposure guideline levels may be exceeded, use an approved NIOSH respirator.

Respirator should be selected by and used under the direction of a trained health and safety

professional following requirements found in OSHA's respirator standard (29 CFR 1910.134),

CAN/CSA-Z94.4 and ANSI's standard for respiratory protection (Z88.2).

Respiratory protection

Not applicable.

Thermal hazards

Always observe good personal hygiene measures, such as washing after handling the material

and before eating, drinking, and/or smoking. Routinely wash work clothing and protective

equipment to remove contaminants.

General hygiene

considerations

9. Physical and chemical properties

Liquid

Appearance

Liquid.

Physical state

#32058 Issue date 11-May-2020

Page: 2 of 5

Liquid.

Form

Not available.

Colour

Petroleum

Odour

Odour threshold Not available.

pH Not available.

Melting point/freezing point Not available.

Initial boiling point and boiling

range

Not available.

Flash point 203.0 - 205.0 °C (397.4 - 401.0 °F) Pensky-Martens Closed Cup

Evaporation rate Not available.

Not available.

Flammability (solid, gas)

Upper/lower flammability or explosive limits

Flammability limit - lower

(%)

Not available.

Flammability limit - upper

(%)

Not available.

Explosive limit - lower ( %) Not available.

Explosive limit – upper

(%)

Not available.

Vapour pressure Not available.

Vapour density Not available.

Relative density 0.8542 - 0.8571 @ 15°C

Solubility(ies)

Solubility (water) Not available.

Partition coefficient

(n-octanol/water)

Not available.

Auto-ignition temperature Not available.

Decomposition temperature Not available.

Viscosity 8.2 - 10 cSt @ 100°C

46.2 - 59 cSt @ 40°C

Other information

Pour point -48 - -45 °C (-54.4 - -49 °F)

10. Stability and reactivity

Not available.

Reactivity

Material is stable under normal conditions.

Chemical stability

No dangerous reaction known under conditions of normal use.

Possibility of hazardous

reactions

Avoid temperatures exceeding the flash point.

Conditions to avoid

Strong oxidising agents.

Incompatible materials

May include and are not limited to: Oxides of carbon. Oxides of nitrogen. Oxides of sulphur. Oxides

of phosphorus.

Hazardous decomposition

products

11. Toxicological information

Information on likely routes of exposure

Inhalation

Prolonged inhalation may be harmful.

Skin contact

No adverse effects due to skin contact are expected.

Eye contact

Direct contact with eyes may cause temporary irritation.

Ingestion

May cause stomach distress, nausea or vomiting.

Symptoms related to the

physical, chemical and

toxicological characteristics

Direct contact with eyes may cause temporary irritation.

Information on toxicological effects

Acute toxicity

Not available.

Prolonged skin contact may cause temporary irritation.

Skin corrosion/irritation

Exposure minutes Not available.

#32058 Issue date 11-May-2020

Page: 3 of 5

Erythema value Not available.

Oedema value Not available.

Direct contact with eyes may cause temporary irritation.

Serious eye damage/eye

irritation

Corneal opacity value Not available.

Iris lesion value Not available.

Conjunctival reddening

value

Not available.

Conjunctival oedema value Not available.

Recover days Not available.

Respiratory or skin sensitisation

Respiratory sensitisation

Not available.

This product is not expected to cause skin sensitisation.

Skin sensitisation

No data available to indicate product or any components present at greater than 0.1% are

mutagenic or genotoxic.

Germ cell mutagenicity

Carcinogenicity This product is not considered to be a carcinogen by IARC, NTP, or OSHA.

Contains < 3% (w/w) DMSO-extract

This product is not expected to cause reproductive or developmental effects.

Reproductive toxicity

Specific target organ toxicity -

single exposure

Not classified.

Specific target organ toxicity -

repeated exposure

Not classified.

Aspiration hazard

Not available.

Chronic effects

Prolonged inhalation may be harmful.

Further information

Not available.

12. Ecological information

Ecotoxicity

Not available.

No data is available on the degradability of this product.

Persistence and degradability

No data available.

Bioaccumulative potential

No data available.

Mobility in soil

Not available.

Mobility in general

Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation

potential, endocrine disruption, global warming potential) are expected from this component.

13. Disposal considerations

Collect and reclaim or dispose in sealed containers at licensed waste disposal site.

Disposal instructions

Dispose in accordance with all applicable regulations.

Local disposal regulations

The waste code should be assigned in discussion between the user, the producer and the waste

disposal company.

Hazardous waste code

Dispose of in accordance with local regulations. Empty containers or liners may retain some

product residues. This material and its container must be disposed of in a safe manner (see:

Disposal instructions).

Waste from residues / unused

products

Empty containers should be taken to an approved waste handling site for recycling or disposal.

Since emptied containers may retain product residue, follow label warnings even after container is

emptied.

Contaminated packaging

14. Transport information

U.S. Department of Transportation (DOT)

Not regulated as dangerous goods.

Transportation of Dangerous Goods (TDG - Canada)

Not regulated as dangerous goods.

15. Regulatory information

This product has been classified in accordance with the hazard criteria of the HPR and the SDS

contains all the information required by the HPR.

Canadian federal regulations

Export Control List (CEPA 1999, Schedule 3)

Not listed.

#32058 Issue date 11-May-2020

Page: 4 of 5

Greenhouse Gases

Not listed.

Precursor Control Regulations

Not regulated.

WHMIS status Non-Hazardous

International regulations

Inventory status

Country(s) or region Inventory name On inventory (yes/no)*

YesCanada Domestic Substances List (DSL)

NoCanada Non-Domestic Substances List (NDSL)

*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)

16. Other information

HEALTH

FLAMMABILITY

PHYSICAL HAZARD

PERSONAL

PROTECTION

LEGEND

4Severe

Moderate

Slight

Minimal

Serious

11-May-2020

Issue date

Revision date

Version No.

Disclaimer

11-May-2020

Information contained herein was obtained from sources considered technically accurate and

reliable. While every effort has been made to ensure full disclosure of product hazards, in some

cases data is not available and is so stated. Since conditions of actual product use are beyond

control of the supplier, it is assumed that users of this material have been fully trained according to

the requirements of all applicable legislation and regulatory instruments. No warranty, expressed

or implied, is made and supplier will not be liable for any losses, injuries or consequential

damages which may result from the use of or reliance on any information contained in this

document.

Irving Blending & Packaging Phone:1.800.574.5823

Prepared by

#32058 Issue date 11-May-2020

Page: 5 of 5

Motomaster 4-Stroke Lawnmower Engine Oil SAE 30 Owner's manual

Brand: Motomaster

Model: 4-Stroke Lawnmower Engine Oil SAE 30

Type: Owner's manual

Here are some of the benefits of using Motomaster 4-Stroke Lawnmower Engine Oil SAE 30:

Protects against wear, rust, and corrosion
Helps to keep your engine running smoothly and efficiently
Extends the life of your lawnmower engine

Download PDF

report

Motomaster 4-Stroke Lawnmower Engine Oil SAE 30 Owner's manual

Motomaster 4-Stroke Lawnmower Engine Oil SAE 30 Owner's manual

Related papers

Other documents