2. Minebea Intec
  3. PR1511 Simulator Box

Minebea Intec PR1511 Simulator Box Owner's manual

  • Hello! I've reviewed the Instrument Manual for the Minebea Intec PR1511 Simulator Box. This device simulates load cells and controls digital inputs/outputs. It supports 4-wire and 6-wire technologies and has features like LED indicators for outputs and switch controls for inputs. I'm ready to answer your questions about it.
  • What type of load cells can the PR1511 simulate?
    What is the material of the PR1511 housing?
    How many digital inputs/outputs does the PR1511 control?
    What is the length of the signal output cable?
Minebea Intec GmbH, Meiendorfer Straße 205 A, 22145 Hamburg, Germany
Phone +49.40.67960.303 Fax +49.40.67960.383
Instrument Manual
PR1511 Simulator Box
Edition 3
07/11/2018
Please note:
Any information in this document is subject to change without notice and does not
represent a commitment on the part of Minebea Intec unless legally prescribed. This
product should be operated only by trained and qualified personnel.
PR1511 Instrument manual
Minebea Intec 3
Contents
1. Application ....................................................................................................................... 5
2. Technical Data ................................................................................................................. 5
3. Dimension of PR1511 ................................................................................................... 6
4. Indication of the Digital Outputs of a Connected Device .................................. 7
5. Simulation of the Digital Inputs of a Connected Device .................................... 8
6. Connecting PR1511 with 6-Wire Cable .................................................................. 9
7. Connecting PR1511 with 4-Wire Cable .................................................................. 9
PR1511 Instrument manual
Minebea Intec 5
1.
Application
The PR1511 simulates 1 mV/V or 2 mV/V load cells with 4-wire and 6-wire technology.
Additionally to control and indicate up to 8 digital inputs/outputs.
2.
Technical Data
Housing
Mild Steel with powder coating
Load cell signal output
0-1 mV/V and 0-2 mV/V (with switch)
Digital Output
Indicate up to 8 digital outputs
Digital Input
Operate up to 8 digital inputs
Connection of digital I/O
Terminal sockets / Plug with Push-In tech
Cable length (Signal Output)
2 m, with marked cable strands
Ac Power adapter
Mounting style
Wall, Interchangeable plug
Input Voltage
90VAC to 264VAC
Output Power Rating
12 Watts
Output Voltage
12 V
Output Current
1A
Conformities
CE, ROHS
PR1511 Instrument manual
6 Minebea Intec
3.
Dimension of PR1511
The dimension of the PR1511 is shown below in the fig 1.
SIDE VIEW
TOP VIEW
REAR VIEW
Fig 1
Note: Dimensions are in mm
PR1511 Instrument manual
Minebea Intec 7
4.
Indication of the Digital Outputs of a Connected Device
The PR1511 has 8 digital output channels for control as shown in below fig 2 & fig 3.
Example:
Connection example for PR1511 with PR5900 digital outputs:
PR1511 Instrument PR5900 Instrument
Internal Circuit
Fig 2
Numbers of outputs
8 (CH1, CH2, CH3, CH4, CH5,
CH6, CH7,CH8)
Output signal
LED ON: 0V
LED OFF: 10V and above
Electrical isolation
No
Connection
Terminal sockets / Plug with
Push-In tech
Outputs
CH 1 CH 2 CH 3 CH 4
+ - + - + - + -
+ - + - + - + -
CH 5 CH 6 CH 7 CH 8
Fig 3
PR1511 Instrument manual
8 Minebea Intec
5.
Simulation of the Digital Inputs of a Connected Device
The PR1511 has 8 digital input channels for control as shown in below fig 4 & fig 5.
Example:
Connection example for PR1511 with PR5900 digital inputs:
PR1511 Instrument PR5900 Instrument
Attention: Choose contact input “passive” for the connected device (e.g.”DE1” for
PR5900)
Internal Circuit
Fig 4
Numbers of Inputs
Input signal Switch ON : 12V
Switch OFF: 0V
Electrical isolation
Connection
Inputs
CH 1 CH 2 CH 3 CH 4
+ - + - + - + -
+ - + - + - + -
CH 5 CH 6 CH 7 CH 8
Fig 5
PR1511 Instrument manual
Minebea Intec 9
6.
Connecting PR1511 with 6-Wire Cable
Fig 6
Note: Cable screens should be connected to the device screen clamping rail.
Terminal strip inscriptions
V+
Supply+ Yellow
S+
Sense+ Green
M+
Meas.+ White
M-
Meas.- Pink
S-
Sense- Grey
V-
Supply- Brown
7.
Connecting PR1511 with 4-Wire Cable
If the connected device has a 4-wire connector (without S+,S-)please connect as follow:
V+ (Yellow) and S+ (Green) to V+ of the connected device
V- (Brown) and S- (Grey) to V- of the connected device
Published by
Minebea Intec GmbH | Meiendorfer Strasse 205 A | 22145 Hamburg, Germany
Phone: +49.40.67960.303 | Email: [email protected]
www.minebea-intec.com
/