2. AMG
  3. AMG2031

AMG AMG2031 Installation guide

  • Hello! I've reviewed the Installation Manual for the AMG2031 Rack and its included accessories. This document outlines how to install the rack in a 19-inch setup as well as how to install cards into the rack. It also describes the power supply options, LED indicators and other key features, so feel free to ask me any questions you have about the unit!
  • How to mount the unit into a 19 inch rack?
    How to mount cards into the rack?
    What is the function of the blue LED indicators?
    What should i do to get dual redundant power?
www.amgsystems.com
AMG2031
amgsystems.com
AMG Systems Ltd. 3 The Omega Centre, Stratton Business Park, Biggleswade, Bedfordshire, SG18 8QB, UK
T :: +44 (0) 1767 600 777 E :: sales@amgsystems.com
D33275-00
AMG2031
1U 3-Slot Rack
Installation Manual - Hardware
19INCH RACK MOUNT INSTALLATION
① Secure the unit into the 19inch
rack using four cage nuts (not
supplied).
Proud to be a British
Manufacturer
To access more information for this product please
visit the product page using the QR code opposite or
the direct link below:
amg-support.com/AMG2031
AMG2031 INCLUDED ACCESSORIES
AMG2031 1U Chassis
INSTALLING CARDS INTO THE AMG2031 RACK
① Slide the card into the
desired slot using the
metal guides as shown.
② Ensure the unit
connects rmly into
the power connector
on the rack backplane.
③ Secure the unit into the
slot using the two xing
screws on the front panel.
LED INDICATORS
LED Colour Description
POWER 1 Blue DC input present on power 1
POWER 2 Blue DC input present on power 2
1 x AMG2002 Power Supply
& Region Specic Mains Lead*
* 1 Power Supply Is Included. For Dual Redundant Operation A Second Power Supply Should Be Ordered
POWER 2
POWER 1
POWER
POWER 2
POWER 1
+ +
- -
Power 1
Power 2
Fault Relay
60V @ 2A Max
Fault relay is normally closed and
will open on either power failure.
If used with a single PSU, the PSU
should be wired to both power inputs.
Card Types Voltage
AMG250/350 10-36 VDC
AMG5000 Series 12-15 VDC
Warning
Do not exceed the rated
voltage Refer to voltage table
/