Snailax SL-923 is a multifunctional leisure massage chair that offers a variety of features to help you relax and relieve muscle tension. The chair's massage heads can perform kneading, tapping, and rolling motions, and you can choose from two different massage modes: synchronous kneading massage and asynchronous kneading massage (Thai stepping massage). The chair also has a heating function to help soothe sore muscles. The angle of the chair's backrest is adjustable, so you can find the perfect position to relax in.
Snailax SL-923 is a multifunctional leisure massage chair that offers a variety of features to help you relax and relieve muscle tension. The chair's massage heads can perform kneading, tapping, and rolling motions, and you can choose from two different massage modes: synchronous kneading massage and asynchronous kneading massage (Thai stepping massage). The chair also has a heating function to help soothe sore muscles. The angle of the chair's backrest is adjustable, so you can find the perfect position to relax in.
Instruction Manual
Please read this manual carefully before using the product and keep it properly
Multifunctional Leisure
Massage Chair SL-923
DIRECTORY
Directory
Safety Precautions
Product structruc drawing
Prepare before use
Product Features
The product Installation
Function Instructions
Product Specifications
Thank you very much for purchasing this product. This manual provides a
safe and effective way for users to operate. Please read this “Safety
Precautions” carefully before use and use them correctly.
The following precautions will help you use this product safely to prevent
danger. Each precaution is divided into “warning” and “attention” according
to the degree of danger of the accident. After reading it, please place it in a
place that is easy to access and keep it proper.
03
02
04
05
06
08
09
Warranty 14
02
SAFETY PRECAUTIONS
Safety Precautions
Warning
Attention
Please use the specified voltage source, use other electric voltage may cause electric
shock, fire, etc.
If the the product fails, please unplug the plug immediately and call the distributor for
advice.
Turn off the power when not in use and remove the plug from the outlet.
When the power cord and plug are damaged, they must be replaced by professional
staff member of the manufacturer or its maintenance department.
When the product is in use, it is forbidden to put your hand into the massage
mechanism cloth cover.
If there is a power outage, please cut off the power switch and unplug the plug.
Please consult your doctor before using this product if you have any of the following
conditions.
1. Use a pacemaker or similar implantable medical device.
2. Suffering from heart disease.
3. Suffering from strain back disease
4.Ragile or damaged bone, especially the back bones.
5. After surgery.
6. Pregnant or shortly after pregnancy
7.Suffering from osteoporosis.
8.Suffering from blood circulation problems or thrombosis.
9.Suffering from skin infections.
10.Being treated or in adjunctive therapy
11. Abnormalities in the limbs.
The duration of use to 15 minutes, long time use may cause
muscle and nerve pain.
03
PRODUCT STRUCTRUC DRAWING
Product structruc drawing
Massage heads
Backrest adjustable handle
Solid wood handrail
Switch button
Mode selection button
Chair foot pad
12V home adapter
04
PREPARATION BEFORE USE
Preparation Before Use
1.INSTALLATION LOCATION
Install the product in dry place.Don’t expose to direct sunlight.
Place the product on carpet to reduce the operational noise.
. Make sure the power cord is not peeled or broken.
. Connect the power cord on the back of product.
. Insert the power cord plug into the socket
2.How to connect the power supply.
05
PRODUCT FEATURES
Product features
1. Full back kneading massage. Massage heads on the waist, back, and neck，
massage the entire back area.
2. The two groups of massage heads can perform regular kneading massage and
also the back walking massage.
3. The massage heads fit all positions of back automatically, make the massage in
place.The massage heads are distributed on the seesaw system. The three
massage heads on the seesaw system can automatically fit the lumbers of users in
different body shapes,the two massage heads on the upper back position as same.
4.The angle of chair backrest is adjustable.Reclining angle adjustment
ranges from 90 degrees --- 135 degrees (As Figure 1).
5. The chair backrest is foldable that can minimize the package
measurement (As Figure 2).
6. The wooden frame of the chair can be assembled that can minimize
the package size.
Adjustable Range
Figure 1 Figure 2
06
FUNCTIONAL INSTRUCTIONS
Functional Instructions
1. Switch key
2. Massage mode button
A. Press this button to turn on the machine. The "kneading function" and "heating
function" are turned on, the light on the massage head lights up, and the massage
heads start to rotate;
B. The initial state of the boot is "synchronous kneading massage" and run in
“speed mode l", and "synchronized kneading massage" and "asynchronous
kneading massage (Thai stepping massage)" will automatically switch every one
minute.
C. 15 minutes automatic timing, after running for 15 minutes, the massager will
automatically shut down;
D. Press this button again to shut down.
A. Press this button to switch the massage modes.
B.This machine has"synchronized kneading massage"and "asynchronous
kneading massage (Thai stepping massage)" two massage modes;
C. "Synchronized kneading massage", that is, the left and right sets of massage
heads do the same relative movement;
D. "Asynchronous kneading massage (Thai stepping massage)" that is, the left
and right sets of massage heads make high and low unequal height relative
movement
07
FUNCTIONAL INSTRUCTIONS
Functional Instructions
3 Massage speed button
4 Heating key
A. Press this button to cycle the massage speed mode.
B. This machine has “massage speed mode 1”.
"Massage speed mode 2", "Massage speed mode 3" three
massage speed modes.
C.Presses the speed mode l" at full speed, the speed of the
massage head is 30RPM.
D.Massage speed mode 2" The first 15S, the massage head
rotation speed is gradually increased from 10RPM to 20RPM;
After 15S, the massage head rotation speed is rotated at
30RPM. Continuous circulation.
E."Massage speed mode 3" In 15S, the rotational speed of the
massage head is gradually increased from 10RPM to 20RPM.
Continuous circulation.
This button controls the light on the massage head.
The lamp on the massage head of this product has a heating function.
A. Press this button, the light turns off.
B. Press this button again, the light turns on.
On/Off
Mode
Speed
Heat
08
PRODUCT SPECIFICATION
Product Specification
1.Trouble shooting
2.Specification
SymptomsPossible Cause Remedy
The machine can not
be operate normally.
The power supply plug
is detached
Check that the power plug
is inserted the socket
securely
The power cord on the
back is disconnected
Check that the power cord
is inserted properly
If abnormal phenomenon still remains after above measures have been
taken to the massage chair,pls contact the manufacturer or local
distributor for repair and maintenance.
Rated voltage 220VC
Gross weight 18KG
Net weight 16KG
Color Twilight Grey
Rated frequency 50Hz
Model M60
Rated power 30W
Outer box size
(without footrest) 750-310-610mm
Use external switching power supply,
input 100-230 VAC, output 12VCD/2.5A
09
1
The Product Installation
THE PRODUCT INSTALLATION
Big hole upward
1. Take out the massage chair and accessories from the box, and put the backrest
on the floor, then lock 4 screws on the Chair frame beam to fix on the bottom of
the seat:
Inner
side
Pay attention to
the direction
of the hole position
Note the label sticked on
bothof the chair frame beam.
Please scan the QR code below or enter the following URL to view the
installation video.
10
The Product Installation
THE PRODUCT INSTALLATION
2
2. Lock the screws on both side of the armrests:
Inner
side Right
Note
Inner
side Left
Note
Note the label sticked on
the left of the handrail.
Note the label sticked on
the right of the handrail.
11
The Product Installation
THE PRODUCT INSTALLATION
3
3. Pay attention to the direction of the screw nut:
4
5
12
The Product Installation
THE PRODUCT INSTALLATION
4. Flip up the seat and tighten the screws:
5. Adjust the angle of chair backrest:
the right foot steps on the bottom strip of the right side frame, the right hand
holds the adjusting handle, and the left hand pulls up the upper end of the
backrest and turns up backward:
13
The Product Installation
THE PRODUCT INSTALLATION
Chair frame
beam x2
Wooden frame
screw x12 Wooden frame
nut x12 Wrench x1
Right side of the armchair frame x1 Left side of the armchair frame x1
Identification of the right side frame:
1.Straight bar to the right
2.Diagonal bar to the left
3. Armrest facing up
(Note: the armrest's bulge faces the installer)
Identification of the left side frame:
1.Straight bar to the left
2.Diagonal bar to the right
3.Armrests up
(Note: the armrest's bulge faces the installer)
Parts list
WARRANTY
Warranty
14
Have queson ?
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Snailax SL-923 is a multifunctional leisure massage chair that offers a variety of features to help you relax and relieve muscle tension. The chair's massage heads can perform kneading, tapping, and rolling motions, and you can choose from two different massage modes: synchronous kneading massage and asynchronous kneading massage (Thai stepping massage). The chair also has a heating function to help soothe sore muscles. The angle of the chair's backrest is adjustable, so you can find the perfect position to relax in.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Kmart 43217779 User manual
-
-
-
Comfier CF-4903W User manual
-
Restwell Seattle Intalift Owner's Handbook Manual
-
Medical Breakthrough NULL User manual
-
Casada KENNEDY IV User manual
-
Infinity Presidential User manual
-
Titan VIGORBL Installation guide
-
Panasonic Indoor Furnishings EP30004 User manual
