DT Research DT301YR Basic Operation Guide

Brand: DT Research

Model: DT301YR

Type: Basic Operation Guide

signage dtri com

Rugged Tablet

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

INTRODUCTION

Thank you for acquiring the DT301YR, part of DT Research’s line of Rugged Tablets.

Featuring a slim yet robust enclosure, the DT301YR with 10.1” TFT display is powered

by an Intel® Core™ i processor, oering opmal combinaons of performance and

power savings. The DT301YR is available with Microso® Windows® operang

system. The soware operang system features web browser, client/ server

compung soware, media player, accessories, and applicaons support.

PACKAGE CONTENTS

• One DT301YR with Baery Pack and Handstrap

• AC-DC Power Adapter with Power Cord

• Basic Operaon Guide

* If your DT301YR contains camera or barcode scanner, please refer to the Tablet

Modules Basic Operaon Guide for detailed operaon.

DT301YR

For the product take-back service informaon, please visit:

hp://www.dtresearch.com.tw/zh/About/csr.html

As an ENERGY STAR® Partner, DT Research Inc. follows the EPA’s product

qualicaon and cercaon process to ensure the products marked with

the ENERGY STAR® logo are ENERGY STAR® qualied for energy eciency.

The ENERGY STAR® program specicaons for computers were to promote

energy eciency and reduce air polluon through more energy-ecient

equipment in homes, oces, and factories. One way products achieve

this goal is by using the Microso Windows power management feature

to reduce power consumpon when the product is not in use. The power

management feature enables the computer to iniate a low-power or

“sleep” mode aer a period of user inacvity.

To take advantage of these potenal energy savings, users should use the

default power management sengs that are provided with ENERGY STAR

qualied computers. The default power management sengs on ENERGY

STAR® qualied computers are preset to behave in the following ways :

• Turn o display aer 10 minutes of user inacvity.

• Iniate a low power sleep mode for the computer aer 30 minutes of

user inacvity.

• Briey press the power buon will bring the computer out of sleep

mode.

Addional informaon on the ENERGY STAR® program, its environmental

benets and the potenal energy and nancial savings of the power

management feature can be found on the EPA ENERGY STAR® Power

Management Web site at hp://www.energystar.gov/powermanagement.

Button Functions

BUTTON ACTION

Power Buon

Programmable Buons

Baery Latch *Push the switch up to unlock the latch, then slide the latch le to remove the baery.

Input/Output Ports

Headphone Jack

LAN Port

USB 3.0 Port

Smart Card Reader

DC-In Jack

USB Type-C

Baery/Power LED Brightness

Control buons

PRECAUTIONS

• Always exercise care when operang and handling the DT301YR.

• Do NOT apply excessive pressure to the display screen.

• We recommend using the Digital Pen (oponal) to keep the screen clean.

• Avoid prolonged exposure of the display panel to any strong heat source.

Wherever possible, the DT301YR should face away from direct light to reduce

glare.

• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use

any AC-DC adapter other than the one provided or acquired from the manufac-

turer or its partners.

• In the unlikely event that smoke, abnormal noise, or strange odor is present,

immediately power o the DT301YR and disconnect all power sources. Report

the problem to your device provider immediately.

• Never aempt to disassemble the DT301YR, as this will void the warranty.

BASIC FEATURES

The DT301YR rugged tablet integrates a bright display, USB ports, and embedded

networking elements such as wireless LAN or oponal 4G.

A DT301YR typically integrates an 802.11ac wireless LAN (WLAN) adapter that may

connect to other wireless devices or access points. If your DT301YR does not come

with such a network adapter, please consult your device provider to establish the

desired network connecvity.

NOTE:

To obtain protecon consistent with any IP rang for the device, the I/O (audio,

power, USB, card reader, etc.) port doors must be closed. If the IP protecon is

compromised by mishandling or misuse, such as by leaving port doors open or

improperly closed, any resulng product damage will not be covered under any

DT Research warranty.

OPERATION

Powering ON and OFF

To acvate the DT301YR, push and quickly release the Power Buon. The display will

come on in a few seconds. To put the DT301YR in Standby mode, push and quickly

release the Power Buon. To turn the DT301YR o for extended storage, power

o safely using any soware funcon that “shuts down computer” provided in the

soware operang system.

NOTE:

The baery pack shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT301YR when seng up for the rst me to fully

charge the baery pack, or use the oponal baery charger kit.

NOTE:

When the baery pack is charging, the blue-colored Baery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity

and the LED stays dark, the baery pack(s) may have been drained substanally.

Try unplugging/ replugging the AC-DC adapter to the DT301YR a few mes to

acvate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Buon to put the

tablet in “Standby” mode while not in use. Pushing briey on the same buon

will wake up the system within seconds.

NOTE:

For DT301YR, avoid using the Power Buon (“hold 4+ seconds” feature) to turn

o the tablet—this form of hardware shutdown is intended to be a means of

recovery from lockups, and not as normal operaon.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed aer a launch sequence of several seconds. The wireless

LAN connecon may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT301YR may be congured using the ulies and methods dictated by

the soware operang system. The DT301YR should be congurable for various

properes such as user proles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT301YR is oen delivered with an embedded (user-inaccessible) 802.11ac

WLAN adapter equipped with a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT301YR should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connecon.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301YR and the

access points have to match. The SSID is case-sensive and it is recommended

that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for

secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly congure

associated sengs such as Authencaon mode, etc.

• Refer to the access point operang manuals for seng up the 802.11 access

points.

Peripherals Support

Through its USB ports, the DT301YR supports a wide range of USB-based peripherals.

These peripherals are applicable for soware installaon, applicaons storage, data

storage, and system soware recovery and updates.

If the DT301YR comes with a Mobile broadband module, please contact your product

and/or service provider for the SIM Card installaon procedures.

USING THE TABLET

To Hold the Tablet

Le hand: grip the le back side of the tablet with your

le hand four index ngers, with thumb resng on the

top of the back side of the tablet and palm securely

against the back.

Right hand: grip the right back side of the tablet with

your right hand four index ngers, with thumb resng

on the top of the back side of the tablet and palm

securely against the back.

Replacing the Battery Pack

1. Slide the baery latch to the unlocked posion.

2. Li the baery pack o the compartment.

Battery Usage and Maintenance

DT Research tablets and laptops are powered by lithium polymer baery packs in

proprietary form factors. Baery conguraons for the DT Research devices include

internal (bridge or backup), removable or swappable implementaons.

Baery usage cycles, or duraon between necessary re-charge, vary with a number

of factors, including device model, device usage paern and baery health/aging.

The DTR baery packs may be charged while aached to the device or when sepa-

rated from the device and docked in proprietary baery charging cradles. Following

the guidelines on good pracce below can help to keep a baery pack healthy and

prolong baery usage cycles and baery lifespan.

• Avoid high heat condions during operaon, idle, charging, and storage states.

• Avoid leng the baery pack remain in very highly charged state or overly low

charged state for extensive periods of me. Keeping the baery capacity between

30% and 80% of maximum capacity is recommended. The prevailing baery

level(s) can be read from the Baery ulity within the Windows operang system.

• Avoid leng the baery be over-discharged or depleted. Over-discharge can

occur when a fully-discharged (0% level or thereabouts) baery pack is allowed

to remain in such a state for an extended period of me (weeks or months).

The embedded baery controls enter a protecon mode and recharging will be

prevented for safety reasons. To reduce the likelihood of over-discharge, consider

recharging idle baeries regularly to some level between 30%-80% of capacity.

• For long term storage, it is recommended that removable baery packs be stored

separated from the device. Otherwise, the system should be placed in Shutdown

mode. The baery level will decrease with me and it is recommended that the

baery packs be monitored or recharged every 2-3 months to maintain baery

health. The targeted baery level should be within 30% to 80% of maximum

capacity.

3. Fit another baery pack into place.

4. Slide the latch to the locked posion.

5. If you want to purchase extra baery packs,

please contact your dealers, or visit our Support

page: hps://www.dtresearch.com/en/

Support/contact.html

Product End-of-Life Notice

For reuse and recycling facilies, please visit below link to get disassembly

instrucons:

hp://www.dtresearch.com.tw/zh/About/csr.html or

hp://www.dtresearch.com.tw/EPEAT/DT301Y_Product_End-of-Life_Disassembly_

Instrucons.pdf

CAUTION:

There is danger of explosion if the baery is incorrectly replaced. Replace the

baery only with the Tablet manufacturer’s baery. Discard used baeries

according to the dealer’s instrucons.

CAUTION:

Do not aempt to disassemble the baery pack.

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protecon against harmful interference in

a residenal installaon. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular

installaon. If this equipment does cause harmful interference to radio or

television recepon, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Cauon: Any changes or modicaons not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operaon is subject to the following two condions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operaon.

This device and its antenna(s) must not be co-located or operang in

conjuncon with any other antenna or transmier.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

DT Research DT301YR Basic Operation Guide

DT Research DT301YR Basic Operation Guide

DT Research DT301YR Basic Operation Guide

Related papers