NAC Image Technology MEMRECAM GX-1 584032-4 Quick Reference Manual

1

Quick Reference Manual

MEMRECAM GX-1

October 5, 2007

NAC Image Technology Inc.

2

Contents

1. Configuration Overview

・ Standard System

・ Basic Options

・ Other Options

2. I/O Connectors

3. LED Status Indicators

4. Connections

・ Single Camera Operation

・ Multi-Camera Operation

5. Operations

・ Basic Operation Schematics

・ GX Link Operations

・ J-Pad 3 Operations

6. Specifications

Appendix

A. Frame Rate/Resolution Chart

B. Pin Assignments of J1, J2 and J3

C. Dimensional Drawings

3

1. Configuration Overview

1.1 Standard System

MEMRECAM GX-1, 2GB, Color (584032-2)

MEMRECAM GX-1, 2GB, Monochrome (584032-4)

・ 1 x Digital High Speed Camera MEMRECAM GX-1

・ 1 x Control Software GX Link

・ 1 x J1 I/O Cable (for power input, trigger input, etc.)

・ 1 x J2 I/O Cable (for viewfinder, J-Pad 3, USB)

・ 1 x J3 I/O Cable (for Ethernet, trigger input, IRIG-B input, etc.)

・ 1 x Mounting Plate

・ 1 x Carrying Case

1.2 Basic Options

・ AC Adapter (584182-1)

・ J-Pad 3: Remote Controller (584028--)

・ Viewfinder (584266--)

J-Pad 3 AC Adapter Viewfinder

4

1.3 Other Options

Multi-Camera Network Options

・ GX Hub (584030--)

・ Remote Cable 3m (H12061-3)

・ Remote Cable 7.5m (H12061-5)

・ Remote Cable 15m (H12061-7)

・ Remote Cable 25m (H12061-8)

・ Remote Cable 50m (H12061X0)

・ Remote Cable 75m (H12061X1)

・ Remote Cable 100m (H12061X2)

GX Hub

Hi-G Options

・ Hi-G Lens, 21mm (4H2167--)

・ Hi-G Lens, 16mm

・ Hi-G Battery (584116--)

・ Battery Charger (584192--)

・ Battery Replacement Kit (584216--)

Specialized Options

・ C-mount Adapter; useable under a resolution of 320x240pixels (4H2169--)

C-mount Adapter

5

2. I/O Connectors

MEMRECAM GX-1 has three I/O connectors at the back of the camera. Followings show locations and

major usages of each I/O. Please refer to Appendix B for details.

J1: Power

・ Power input

・ Trigger input (contact, TTL)

・ Status signal outputs

J2: VF J-PAD

・ Viewfinder

・ J-Pad 3

・ USB 2 (for a storage device)

・ ARM

J3: Remote

・ Ethernet (100base-TX/1000base-T)

・ Trigger input (Current Loop)

・ IRIG-B input

・ External sync

6

3. LED Status Indicator

MEMRECAM GX-1 indicates its status using five LED’s at the back of the camera. This section will explain

features and functions of the LED status indicators.

Location and layout

Status

1) UB: USB

LED Status

Green An USB device is connected.

Off No connection or power off.

2) ET: Ethernet

LED On/Blinking Status

On Network is connected via 100Base-TX/1000Base-T.

Green

Blinking Network is activating via 100Base-TX/1000Base-T.

Off No connection or power off.

Note: There is no difference between 100base-TX and 1000base-T on the LED indicator.

LED Status Indicators

・ UB: USB

・ ET: Ethernet

・ CM: Camera Mode

・ PW: Power

・ MB: Memory Backup

7

3) CM: Camera Mode

LED Status

Blue STOP/READY Mode:

Status just after boot up or completion of recording, or stop/still in playback.

White

VIEW Mode:

The imager is outputting image signal while the last recording image data is kept in

the memory.

Magenta

ARM Mode:

The imager is outputting image signal that is being recorded (overwritten) to the

memory.

Red

REC Mode:

The imager is outputting image signal that is being recorded to the memory after

detecting the trigger signal.

Off Power off or booting up.

4) PW: Power

LED Status

Green Power is on and the camera is in normal state.

Red

Power is on but the camera is in abnormal state.

(in case of malfunctioned, power failure (over/low voltage), over

temperature on the sensor)

Off Power is off.

5) MB: Memory Backup

It indicates amount of the battery and backup status by combination of color and on/blinking/off.

Battery Amount

LED Amount

Red Short

Orange Intermediate

Green Full

Note: Please supply the power to the camera if the LED turns to Red from Orange during the

memory backup otherwise the image data in the memory will be lost.

Backup Status

LED Backup Status

On Backup by an external power supply.

Blinking Backup by the built-in battery.

Off Backup is not activated.

Note: Memory backup is not activated if there is no data in the memory.

8

4. Connections

Single Camera Operation

Host PC

1000Base-T

Switching Hub

MEMRECAM

CAT5E or CAT6 Cable Max.100m

GX1

AC Adapter

* You can connect the GX1 to a Laptop PC directly using a CAT5E/CAT6 cable.

Local Single Camera Operation (w/o PC)

M EM RECAM

GX1

Viewf inder

USB Memory /

USB Card Reader

AC Adapter

J-Pad 3

9

Multi-Camera Operation

MEMRECAM

Host PC

1000Base-T

Switch ing Hub

GX-Hub

GX1

Remote Cable

up to 100m

Up to 100m

MEMRECAM

GX Remote Cable（Copper) Max.100m

CAT5E or CAT6 Cable Max.100m

GX1

MEMRECAM

GX-Hub

GX1

Up to 100m

MEMRECAM

GX1

GX-Hub

10

5. Operations

5.1 Basic Operation Procedures

Power On

Boot Up

Ready

View

Arm

Triggered

Recording Done

Download

Playback

Auto View Mode Power Off

Memory Backup

11

5.2 GX Link (Control S/W) Operations

Refer to GX Link manual for operations in detail.

Click a camera button

Attach a camera (s)

Ready

View

Arm

Triggered

Recording Done

Download

Playback

Auto View Mode

Boot up GX Link

GX Link identifies all

applicable cameras

Network Settings at PC

* IP address settings

* TCP/IP optimization Connection

Camera

Operation

12

5.3 J-Pad 3 Operations

1) General

J-Pad 3 is an optional remote controller useable for the Memrecam GX series. It allows you to operate

most of the functions of the camera without a control PC (GX Link).

Important: Settings in GX Link (control software) are prior to settings in the camera. Therefore, even if

you set the parameters of the camera using the J-Pad, all settings will be followed to the GX

Link settings once you connect the control PC to the camera.

2) Functions and Features

・ You can operate the Memrecam GX without a PC.

・ Easy operations by control keys and jog dial.

・ There are shortcut keys for basic settings and functions as follows in addition to detail settings

from the menu key.

 Settings: Frame Rate, Shutter Speed, Trigger Mode

 Functions: Low Light Mode, Download Mode, External Signal Setting Mode.

・ It has a LCD to display the setting parameters (but not to display image from the camera).

3) Cable

・ A pigtail style

・ Length: 2.9m

4) Control Panel

Keys:

・ Mode Keys: REV, STOP, FWD, PLAY, VIEW, ARM, TRIG

・ Setup Keys: MENU, SET, ↑(Up), ↓(Down), →(Right), ←(Left)

・ Shortcut Keys: FRM RATE, SHUTTER, TRIG, S.SET, E.SET, LOW LIGHT, WAVE,

DOWNLOAD

Jog Dial

・ CW for up, CCW for down, Push for set

LED

・ Mode: REV, STOP, FWD, PLAY, VIEW, ARM, TRIG, LOW LIGHT

・ Settings: FRM RATE, SHUTTER, TRIG, S.SET, E.SET, MENU (WAVE, DOWNLOAD)

13

Lock Switch

・ Settings can be locked by a slide switch at side of the J-Pad to prevent mis-operation.

5) LCD

Spec: 128 x 64 dots, monochrome, backlight

Contents of display

・ Status:

Mode, Frame Rate, Frame Size, Shutter, Trigger Mode, ID, Scene, Frame Counter,

Time, Payback Range tool bar

・ Recording Setup Menu:

Scene No, Trigger Mode, Frame Rate, Frame Size, Shutter, Auto Exposure, DRES,

Low Light Mode, Gain, White Balance, Enhance, Gamma, Chrome, Knee, EST

・ General Setup Menu:

Gain, White Balance, Enhance, Gamma, Chrome, Knee, PC operation lock, Memory

Segment, ID, Date & Time, OSD display, CAFM display, Frame Counter display,

Video Output display, Beep sound, Warning display, Trigger setting, System setting,

Information, Download

14

6) Appearance

15

7) Functions of Keys

a) Setup Keys

MENU Enters Menu for:

・General Setup <TOP MENU>

・Recording Setup <VIEW MENU>

・System Setup <SYSTEM SETUP MENU>

Ends Menu

SET Sets the parameter

UP Moves a cursor to upward

DOWN Moves a cursor to downward

LEFT Moves a cursor to left

RIGHT Moves a cursor to right

b) Mode Keys

STOP Stops playback.

Stops VIEW or ARM or REC mode.

PLAY Playback.

REV Reduces playback speed in loop or foreword replay. And increases

playback speed in backward replay.

FWD Increases playback speed in loop or foreword replay. And reduces

playback speed in backward replay.

VIEW・ARM Turns to View mode from Ready mode.

Turns to Arm mode from View mode.

TRIG Gives trigger in Arm mode to end the recording.

Jumps to a triggered frame or event-marked frame in STOP mode.

MENU

SET

16

c) Direct Setting Keys

Following keys allow you to set essential parameters and functions directly as regards recording,

playback and data download.

FRM RATE Set Key: sets frame rate.

SHUTTER Set Key: sets shutter speed.

TRIG Set Key: sets trigger position.

S.SET Set Key: sets a start frame in playback/download.

E.SET Set Key: sets an end frame in playback/download.

LOW LIGHT Key: On/off low light mode.

WAVE Not Available

DOWNLOAD Key: makes a download via USB2 I/F to a memory stick, a CF w/ card

reader or a HDD.

FRM RATE

TRIG

SHUTTER

DOWNLOAD

WAVE

17

d) Combination Key Operations

＋ Jumps to the start frame in STOP status.

＋ Jumps to the end frame in STOP status.

＋ + Enters a maintenance menu setting for;

・ NTSC/PAL

・ IP address

・ Reset to default settings

e) Jog Dial

CW for upward, CCW for downward, Push for set.

SET

CW

CCW

PUSH

18

6. Specifications

• Sensor: 12-bit, 1.3M-pixel CMOS sensor

• Frame Rate: 50-200,000pps

• Resolution:

1,280 x 1,024pixels up to 2,000pps

640 x 480pixels up to 6,000pps

512 x 384pixels at 10,000pps

* See Appendix A for more details

• Electronic Shutter: OPEN to 3µ sec. * See Appendix A for more details

• Memory Configuration: 2GB, up to 8 segments (256MB x 8)

• Recording Time: 0.65sec (2000fps, 1280x1024x10bit)

• Video Output: NTSC or PAL

• Interface: 100BASE-TX/1000BASE-T

• Power: 20-32Vdc

• Size: 100(W) x 100(H) x 230(D)mm

• Weight: less than 4kg

• Status Indicators: Power, Ethernet, USB, Memory Backup, Camera Status

• I/O cables:

J1: Power input, Trigger input (TTL/contact closure), Arm status output, Fault status

output, EST input

J2: Viewfinder, J-Pad III, USB, ARM command in

J3: Ethernet, Trigger input (Photo-isolation), IRIG-B input (modulated), EST/EVENT input,

Exposure pulse output

19

-Appendix A-

Frame Rate, Resolution, Sensing Area & Exposure Time

Frame

Rate

(pps)

Resolution in

largest or square

format (pixels)

Sensing

Area

(mm)

Max.

Exposure

(µ sec)

Min.

Exposure

(µ sec)

Setting

Step

(µ sec)

100 1,280 x 1,024 27.78 x 22.22 9,996 6 1 or 2

250 1,280 x 1,024 27.78 x 22.22 3,996 6 1 or 2

500 1,280 x 1,024 27.78 x 22.22 1,995 6 1 or 2

1,000 1,280 x 1,024 27.78 x 22.22 996 6 1 or 2

2,000 1,280 x 1,024 27.78 x 22.22 496 6 1 or 2

2,500 1,024 x 1,024 22.22 x 22.22 396 6 1 or 2

3,000 928 x 928 20.13 x 20.13 329 6 1 or 2

4,000 800 x 800 16.66 x 16.66 246 6 1 or 2

5,000 704 x 704 12.28 x 12.28 197 5 1 or 2

6,000 608 x 608 13.19 x 13.19 164 5 1

8,000 512 x 512 11.11 x 11.11 123 4 1

10,000 464 x 464 10.67 x 10.67 98 5 1

20,000 304 x 304 6.60 x 6.60 48 4 1

30,000 224 x 224 4.86 x 4.86 32 4 1

40,000 176 x 176 3.82 x 3.82 24 3 1

50,000 144 x 144 3.12 x 3.12 19 3 1

60,000 128 x 128 2.78 x 2.78 15 3 1

80,000 96 x 96 2.08 x 2.08 11 3 1

100,000 64 x 64 1.39 x 1.39 9 3 1

150,000 32 x 64 0.69 x 1.39 5 3 1

200,000 8 x 64 0.17 x 1.39 4 3 1

z You can choose the imaging area flexibly within above pixel format (4-pixel step in hor

izontal, 16-pixel step in vertical).

4:3 Format

Frame Rate (pps) Resolution (pixels) Sensing Area (mm)

2,000 or less 1,280 x 960 (SXGA) 27.78 x 20.83

2,500 1,152 x 864 24.99 x 18.74

3,000 or less 1,024 x 768 (XGA) 22.22 x 16.66

4,000 896 x 672 19.44 x 14.58

6,000 704 x 528 15.27 x 11.45

6,000 or less 640 x 480 (VGA) 13.89 x 10.42

8,000 576 x 432 12.49 x 9.37

10,000 512 x 384 11.11 x 8.33

20,000 or less 320 x 240 (QVGA) 6.94 x 5.20

16:9 Format

Frame Rate (pps) Resolution (pixels) Sensing Area (mm)

2,500 or less 1,280 x 720 27.78 x 15.62

4,000 1,024 x 576 22.22 x 12.50

6,000 768 x 432 16.67 x 9.37

20

-Appendix B-

J1

1 DC 24V IN

2 DC Return

3 EST IN

4 EST GND

5 Trigger Signal IN (make contact/TTL)

6 Trigger Signal GND

7 ARM Status OUT

8 ARM Status GND

9 FAULT Status OUT

10 FAULT Status GND

J2

1 ARM Command IN

2 GND (ARM Command Return)

3 USB VBUS

4 USB D+

5 USB D-

6 USB GND

7 NC

8 NC

9 DC 24V OUT (power for Viewfinder)

10 DC 24V OUT Return FAULT Status GND

11 Video Output

12 GND (Video Output Return)

13 TXD OUT (RS-232C for J-Pad 3)

14 RXD IN (RS-232C for J-Pad 3)

15 DC 24V OUT (power for J-Pad 3)

16 GND (TXD, RXD RTN)

Page is loading ...

NAC Image Technology MEMRECAM GX-1 584032-4 Quick Reference Manual

This manual is also suitable for

NAC Image Technology MEMRECAM GX-1 584032-4 Quick Reference Manual

Other documents