Protocol 2052-6CF-Tread Lightly User manual

TREAD

LIGHTLY

BICYCLE VALVE LIGHTS

Instruction Manual

Read through this entire instruction manual BEFORE using

Tread Lightly. We’re dedicated to bringing you well-designed

products that make living fun and easy. We stand behind

all our products and warrant this to be free from defects in

workmanship and materials.

For service claims or questions please consult our website

ProtocolDesign.com.

WARNINGS:

- Do not mix old and new batteries.

- Do not submerge in water.

COVER

BACK

PARTS: INSTALLATION:

Batteries

1. Unscrew the valve cap portion from the light tube.

2. Insert 3 of the ‘AG10’ button cell batteries (included) into

each valve cap, positive side down.

3. Screw the tube back onto the valve cap.

Wheels

1. Unscrew the valve cap on the wheel of the bike. Screw the

wheel light into the wheel.

Light Tube

Valve Cap

On/Off Button

Each click of the on/off button will rotate through steady,

then six different flashing speeds of light, and then off.

USE: