2/2009 Document # 6430-00298 C
Copyright Notice
Copyright © 2008-2009 Socket Mobile, Inc. All rights reserved.
Socket, the Socket logo, SoMo, SocketScan, Connect!Agent, Wi-Fi
Companion, and Increasing Mobile Productivity are registered trademarks or
registered trademarks of Socket Mobile, Inc. All other brand and product
names are trademarks of their respective holders.
Reproduction of the contents of this manual without the permission of
Socket Mobile is expressly prohibited. Please be aware that the products
described in this manual may change without notice.
Feel free to contact Socket Mobile at:
Socket Mobile, Inc.
39700 Eureka Drive
Newark, CA 94560-4808
USA
Other than the above, Socket Mobile can assume no responsibility for
anything resulting from the application of information contained in this
manual.
Socket Mobile requests that you refrain from any applications of the SoMo
that are not described in this manual. Please refrain from disassembling the
card. Disassembly of this device will void the product warranty.
You can track new product releases, software updates and technical
bulletins by visiting the Socket Mobile website at: www.socketmobile.com.
2
Release Notes
Known Issues resolved:
1. The ability to charge the SoMo 650 though he ActiveSync port without having to have
an ActiveSync connection.
2. Included support for Enfora CF GSM/GPRS modem.
3. Resolved power management issue when SoMo is docked in cradle overnight.
4. Resolved issue when mouse/keyboard are connected to cradle prior to docking SoMo
Current released version of Socket Mobile software in SP1:
SoMo 650 ROM Version1.04 SP1 (build 0003)
SoMo 650 Integrated
Software
Socket Mobile Peripheral P/N and Revision
Bluetooth® AFH 1.0.2.00 n/a -
Connect!Agent™ 1.2.22 n/a -
Radio Buddy 1.0.5.00 n/a -
Rugged 10-100
(Ethernet) 3.0.24.00
Rugged CF 10/100 Card 8510-00263 B and above
Serial (SIO) 3.0.6.00 Serial I/O CF Card - removable
Serial I/O CF Card - ruggedized
8510-00094 D and above
8510-00115 D and above
Socket Modem Utilities
3.0.20.0
Cordless 56K Modem
CF 56K Modem
SDIO 56K Modem
8550-00003
8510-00180 J and above
8510-00232
SocketScan 7.2.4 SD Scan Card 3E (CMOS)
SD Scan Card 3M (Class 1 Laser)
SD Scan Card 3P (Class 2 Laser)
CF Mag Stripe Reader 4E
CF Scan Card 5E (CMOS)
CF Scan Card 5M (Class 1 Laser)
CF Scan Card 5P (Class 2 Laser)
CF Scan Card 5X (2D Imager)
CF RFID 6E (Reader)
CF RFID 6M (Reader + Class 1 Laser)
CF RFID 6P (Reader + Class 2 Laser)
CHS 7E (CMOS)
CHS 7M (Class 1 Laser)
CHS 7P (Class 2 Laser)
CRS 9M Ring (Class 1 Laser)
- Bluetooth Wrist
CRS 9P Ring (Class 2 Laser)
- Bluetooth Wrist
8510-00209 K and above
8510-00265 B and above
8510-00266 B and above
8510-00250 B and above
8510-00234 D and above
8510-00243 C and above
8510-00244 C and above
8510-00272 A and above
8510-00226 J and above
8510-00248 B and above
8510-00249 B and above
8550-00007 C and above
8550-00005 E and above
8550-00015 C and above
8550-00022 C
8550-00021 D
8550-00018 E
8550-00019 F
Wi-Fi Companion
2.11.16
n/a -
3
Installation Guide:
STEP 1: Back up Data on the Device
IMPORTANT! The SP1 is only intended for the SoMo 650 currently running ROM
v1.00.04. If your device does not have v1.00.04, you will first need to 1upgrade to
this version.
You will be required to do a clean boot (cold boot) at the end of SP1 installation. If
you have any data on the device please ensure that you have backed it up before
you run the update.
1 Please refer to User’s Guide for instructions on upgrading the SoMo
4
STEP 2: Transfer the File to the Device
The file SoMo650SP1_build0003.cab.pks must be transferred to your SoMo 650.
You can do this by either of two methods:
− Use ActiveSync to copy the file to the Temp folder on your SoMo 650
− Copy the file to a SD/CF memory card and insert into your SoMo 650. The
SD/CF card must be formatted in FAT12 or FAT16. Most higher capacity cards
are formatted by default in FAT32, which is not supported. SDHC cards are not
supported in Windows Mobile 5.
Transferring the file with ActiveSync
1. Use the USB cable/cradle to create an active connection between the SoMo and
a host PC. Use ActiveSync 4.0 or greater or the Windows Mobile Device Center
for Windows Vista.
2. On the host PC, in the ActiveSync screen, click on the Explore button.
3. Double-click on My Windows Mobile-Based Device
5
STEP 3: Install the File
1. On the SoMo 650, open Pocket Explorer.
2. Navigate to the SoMo650SP1_build0003.cab.pks file, either in the Temp
folder if you used ActiveSync, or on the memory card.
3. Double-tap on the file to launch the upgrade process.
4. On your SoMo, a screen will report that updates must be validated. Tap
OK.
5. The next screen will report that the SoMo needs to report. Tap Update.
6. The SoMo will begin to install the update.
7
STEP 5: Perform a Clean Reset
CAUTION: A CLEAN RESET IS MORE POWERFUL THAN A SOFT RESET. IT WILL DELETE FILES
AND FOLDERS WHEN YOU PERFORM A CLEAN RESET, FORMATS, PREFERENCES AND OTHER
SETTINGS INCLUDING DATE AND TIME ARE RESTORED TO THEIR FACTORY DEFAULTS. ALL
DATA, RECORDS AND ENTRIES, EXCEPT THOSE STORED IN ROM, WILL BE ERASED.
NOTE: If you set a security password on the SoMo 650 and forget the password, a clean
reset will remove the password setting.
1.
Press and hold the Left Programmable Application Button, the Calendar
and Contacts shortcut buttons on your SoMo 650.
2.
While holding the three buttons, using the tip of your stylus, lightly press
the Reset button inside the hole on the bottom of your SoMo 650.
10
It is recommended that you hold the SoMo 650 in your left hand. Press the
left programmable action button with your left thumb and the two
shortcut buttons with your left index and middle finger. Hold the stylus in
your right hand to press the reset button.
3.
Continue to hold the three until a splash screen appears with the Socket
logo and starts blinking.
4.
After the Socket Mobile Splash Screen starts blinking, release the three
buttons and follow the onscreen instructions.
Your SoMo 650 is now fully upgraded and ready to be put back into service.
11
/