Electrolux EHL9530FOK User manual

Page is loading ...

CONTENTS

1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

6. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

7. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

8.

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

9. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it

decades of professional experience and innovation. Ingenious and stylish, it has been designed

with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great

results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

Register your product for better service:

www.electrolux.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

ENGLISH 19

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible if an incorrect installation and use causes in-

juries and damages. Always keep the instructions with

the appliance for future reference.

1.1 Children and vulnerable people safety

WARNING!

Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they are supervised by an adult or a per-

son who is responsible for their safety.

• Do not let children play with the appliance. Children un-

der 3 years must not be left unsupervised in the vicinity

of the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

• If the appliance has a child safety device, we recom-

mend that you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2 General Safety

• The appliance and its accessible parts become hot

during use. Do not touch the heating elements.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be

dangerous and may result in fire.

20

www.electrolux.com

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a

fire blanket.

• Do not store items on the cooking surfaces.

• Do not use a steam cleaner to clean the appliance.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• If the glass ceramic surface is cracked, switch off the

appliance to avoid the possibility of electric shock.

• After use, switch off the hob element by its control and

do not rely on the pan detector.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

2.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must in-

stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent to

a door or under a window. This pre-

vents hot cookware to fall from the ap-

pliance when the door or the window is

opened.

• If the appliance is installed above draw-

ers make sure that the space, between

the bottom of the appliance and the up-

per drawer, is sufficient for air circula-

tion.

• Make sure that the ventilation space of

2 mm, between the worktop and the

front of the below unit, is free. The war-

ranty does not cover damages caused

by the lack of an adequate ventilation

space.

• The bottom of the appliance can get

hot. We recommend to install a non-

combustile separation panel under the

appliance to prevent access to the bot-

tom.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections must be made

by a qualified electrician.

ENGLISH 21

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure the mains cable or plug (if

applicable) does not touch the hot ap-

pliance or hot cookware, when you

connect the appliance to the near sock-

ets

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Make sure that a shock protection is in-

stalled.

• Use the strain relief clamp on cable.

• Make sure not to cause damage to the

mains plug (if applicable) or to the

mains cable. Contact the Service or an

electrician to change a damaged mains

cable.

• The electrical installation must have an

isolation device which lets you discon-

nect the appliance from the mains at all

poles. The isolation device must have a

contact opening width of minimum 3

mm.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

2.2 Use

WARNING!

Risk of injury, burns or electric

shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first

use.

• Use this appliance in a household envi-

ronment.

• Do not change the specification of this

appliance.

• Do not let the appliance stay unatten-

ded during operation.

• Do not operate the appliance with wet

hands or when it has contact with wa-

ter.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Set the cooking zone to “off” after each

use. Do not rely on the pan detector.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the ap-

pliance is in operation.

• When you place food into hot oil, it may

splash.

WARNING!

Risk of fire or explosion.

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food rem-

nants, can cause fire at a lower temper-

ature than oil used for the first time.

• Do not put flammable products or items

that are wet with flammable products

in, near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the con-

trol panel.

• Do not let cookware to boil dry.

• Be careful not let objects or cookware

fall on the appliance. The surface can

be damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the appli-

ance.

• Cookware made of cast iron, aluminium

or with a damaged bottom can cause

scratches on the glass or glass ceram-

ic. Always lift these objects up when

you have to move them on the cooking

surface.

22

www.electrolux.com

2.3 Care and Cleaning

WARNING!

Risk of damage to the appliance.

• Clean regularly the appliance to prevent

the deterioration of the surface material.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal ob-

jects.

2.4 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for in-

formation on how to discard the appli-

ance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

3. PRODUCT DESCRIPTION

1 2

4

3

1

Induction cooking zone

2

Induction cooking zone

3

Induction cooking zone

4

Control panel

3.1 Control panel layout

51 2

3

4

10

89 7

6

Use the sensor fields to operate the appliance. The displays, indicators and

sounds tell which functions operate.

Sensor field Function

1

To activate and deactivate the appliance.

2

To lock / unlock the control panel.

3

Timer indicators of the cooking

zone

To show for which of the cooking zones

you set the time.

4

Timer display To show the time in minutes.

ENGLISH 23

Sensor field Function

5

To activate the Power function.

6

Heat setting display To show the heat setting.

7

Control bar To set the heat setting.

8

/

To increase or decrease the time.

9

To set the cooking zone.

10

To activate and deactivate the STOP+GO

function.

3.2 Heat setting displays

Display Description

The cooking zone is deactivated.

-

The cooking zone operates.

The function operates.

The Automatic Heat Up function operates.

Power function operates.

+ digit

There is a malfunction.

/ /

OptiHeat Control (3 step Residual heat indicator) : contin-

ue cook / stay warm / residual heat.

Lock / The Child Safety Device operates.

Not correct cookware or too small or no cookware on the

cooking zone.

The Automatic Switch Off function operates.

3.3 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

\ \ The risk of burns

from residual heat!

OptiHeat Control shows the level of the

residual heat. The induction cooking

zones make the heat necessary for cook-

ing directly in the bottom of the cookware.

The glass ceramic is hot from the heat of

the cookware.

4. DAILY USE

WARNING!

Refer to the Safety chapters.

4.1 Activation and deactivation

Touch for 1 second to activate or de-

activate the appliance.

4.2 Automatic Switch Off

The function deactivates the

appliance automatically if:

•

All cooking zones are deactivated (

).

• You do not set the heat setting after

you activate the appliance.

24

www.electrolux.com

• You spill something or put something

on the control panel for more than 10

seconds, (a pan, a cloth, etc.). An

acoustic signal sounds some time and

the appliance deactivates. Remove the

object or clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before

you use the appliance again, wait for

the cooking zone to cool down.

• You use incorrect cookware. The sym-

bol

comes on and the cooking zone

deactivates automatically after 2 mi-

nutes.

• You do not deactivate a cooking zone

or change the heat setting. After some

time

comes on and the appliance

deactivates. See below.

• The relation between heat setting and

times of the Automatic Switch Off func-

tion:

•

, - — 6 hours

•

- — 5 hours

•

- — 4 hours

•

- — 1.5 hours

4.3 The heat setting

Touch the control bar at the heat setting.

Move your finger along the control bar to

change the setting. Do not release before

you have a correct heat setting. The dis-

play shows the heat setting.

4.4 Automatic Heat Up

You can get a necessary heat setting in a

shorter time if you activate the Automatic

Heat Up function. This function sets the

highest heat setting for some time (see

the diagram), and then decreases to the

necessary heat setting.

To start the Automatic Heat Up function

for a cooking zone:

1.

Touch ( comes on in the dis-

play).

2.

Immediately touch the necessary heat

setting. After 3 seconds

comes on

in the display.

To stop the function change the heat set-

ting.

1

2

3

4

5

6

7

8

9

10

11

12

0

1 2 3 4 5 6 7 8 9 101112 1314

4.5 Power function

The Power function makes more power

available to the induction cooking zones.

The Power function is activated for 10 mi-

nutes at most. After, that the induction

cooking zone automatically sets back to

highest heat setting. To activate, touch

, comes on. To deactivate, touch a

heat setting

- .

4.6 Power management

The power management divides the pow-

er between two cooking zones in a pair

(see the illustration). The power function

increases the power to the maximum level

for one cooking zone in the pair. The

power in the second cooking zone auto-

matically decreases. The heat setting dis-

play for the reduced zone changes be-

tween two levels.

ENGLISH 25

4.7 Timer

Count Down Timer

Use the Count Down Timer to set how

long the cooking zone operates for only

this one time.

Set the Count Down Timer after the

selection of the cooking zone.

You can set the heat setting before or af-

ter you set the timer.

•

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

• To activate the Count Down Timer:

touch

of the timer to set the time (

00

-

99

minutes). When the indicator

of the cooking zone start to flash slow,

the time counts down.

• To see the remaining time: set the

cooking zone with

. The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

•

To change the Count Down Timer:

set the cooking zone with

. Touch

or .

• To deactivate the timer: set the

cooking zone with

. Touch . The

remaining time counts back to

00

.

The indicator of the cooking zone goes

out. To deactivate you can also touch

and at the same time.

When the countdown comes to an end,

the sound operates and

00

flashes.

The cooking zone deactivates.

•

To stop the sound: touch

CountUp Timer ( The count up

timer)

Use the CountUp Timer to monitor how

long the cooking zone operates.

•

To set the cooking zone (if more

than 1 cooking zone operate ) :

touch

again and again until the indi-

cator of a necessary cooking zone

comes on.

• To activate the CountUp Timer:

touch

of the timer comes on.

When the indicator of the cooking zone

starts to flash slow, the time counts up.

The display switches between

and

counted time (minutes).

• To see how long the cooking zone

operates: set the cooking zone with

. The indicator of the cooking zone

starts to flash quickly. The display

shows the time that the cooking zone

operates.

•

To deactivate the CountUp Timer:

set the cooking zone with

and touch

or to deactivate the timer. The in-

dicator of the cooking zone goes out.

Minute Minder

You can use the timer as a Minute Mind-

er while the cooking zones do not oper-

ate. Touch

. Touch or of the tim-

er to set the time. When the time comes

to an end, the sound operates and

00

flashes.

•

To stop the sound: touch

4.8 STOP+GO

The function sets all cooking zones

that operate to the lowest heat setting (

).

When

operates, you cannot change

the heat setting.

The

function does not stop the timer

function.

•

To activate this function touch

.

The symbol

comes on.

•

To deactivate this function touch

.

The heat setting that you set before

comes on.

4.9 Lock

When the cooking zones operate, you

can lock the control panel, but not

. It

prevents an accidental change of the heat

setting.

First set the heat setting.

To start this function touch

. The sym-

bol

comes on for 4 seconds.

The Timer stays on.

To stop this function touch

. The heat

setting that you set before comes on.

When you stop the appliance, you also

stop this function.

26

www.electrolux.com

4.10 The Child Safety Device

This function prevents an accidental oper-

ation of the appliance.

To activate The Child Safety Device

•

Activate the appliance with

. Do not

set the heat settings.

•

Touch

for 4 seconds. The symbol

comes on.

•

Deactivate the appliance with .

To deactivate The Child Safety Device

•

Activate the appliance with

. Do not

set the heat settings. Touch

for 4

seconds. The symbol

comes on.

•

Deactivate the appliance with

.

To override The Child Safety Device

for only one cooking time

•

Activate the appliance with

. The

symbol

comes on.

•

Touch for 4 seconds. Set the heat

setting in 10 seconds. You can oper-

ate the appliance.

• When you deactivate the appliance with

, The Child Safety Device operates

again.

4.11 OffSound Control

(Deactivation and activation of

the sounds)

Deactivation of the sounds

Deactivate the appliance.

Touch

for 3 seconds. The displays

come on and go out. Touch

for 3 sec-

onds.

comes on, the sound is on.

Touch

, comes on, the sound is off.

When this function operates, you can hear

the sounds only when:

•

you touch

• the Minute Minder comes down

• the Count Down Timer comes down

• you put something on the control panel.

Activation of the sounds

Deactivate the appliance.

Touch

for 3 seconds. The displays

come on and go out. Touch

for 3 sec-

onds.

comes on, because the sound

is off. Touch

, comes on. The

sound is on.

5. HELPFUL HINTS AND TIPS

INDUCTION COOKING ZONES

For induction cooking zones a strong

electro-magnetic field creates the heat in

the cookware very quickly.

5.1 Cookware for induction

cooking zones

Use the induction cooking zones

with correct cookware.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, the bottom made

of multi-layer (with correct mark from a

manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is correct for an induction

hob if …

• ... some water boils very quickly on a

zone set to the highest heat setting..

ENGLISH 27

• ... a magnet pulls on to the bottom of

the cookware.

The bottom of the cookware

must be as thick and flat as possi-

ble.

5.2 Use of the cooking zones

IMPORTANT

Put the cookware on the cross which is

on the surface that you cook. Cover the

cross fully. The magnetic part of the bot-

tom of the cookware must be 125 mm

minimum. Induction cooking zones adapt

to the dimension of the bottom of the

cookware automatically. You can cook

with the large cookware on two cooking

zones at the same time.

5.3 The noises during operation

If you can hear

• crack noise: cookware is made of dif-

ferent materials (Sandwich construc-

tion).

• whistle sound: you use one or more

cooking zones with high power levels

and the cookware is made of different

materials (Sandwich construction).

• humming: you use high power levels.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not re-

fer to appliance malfunction.

5.4 Energy saving

How to save energy

• If it is possible, always put the lids on

the cookware.

• Put cookware on a cooking zone be-

fore you start it.

• Use the residual heat to keep the food

warm or to melt it.

The cooking zone efficiency

The cooking zone efficiency is related to

the diameter of the cookware. The cook-

ware with a smaller diameter than the

minimum receives only a part of the pow-

er generated by the cooking zone. For the

minimum diameters see the Technical In-

formation chapter.

5.5 Öko Timer (Eco Timer)

To save energy, the heater of the

cooking zone deactivates before

the count down timer sounds. The

difference in the operation time

depends on the heat setting level

and the length of the cooking op-

eration.

5.6 The Examples of cooking

applications

The relation between the heat setting and

the cooking zone consumption of power

is not linear.

When you increase the heat setting it is

not proportional to the increase of the

cooking zone consumption of power.

It means that the cooking zone with the

medium heat setting uses less than a half

of its power.

The data in the table is for guid-

ance only.

He

at

set

tin

g

Use to: Time Hints Nominal

power

consump-

tion

1

Keep warm the food

you cooked

as required Put a lid on a cook-

ware

3 %

1 -

3

Hollandaise sauce,

melt: butter, chocolate,

gelatine

5 - 25 min Mix from time to time 3 – 8 %

28

www.electrolux.com

He

at

set

tin

g

Use to: Time Hints Nominal

power

consump-

tion

1 -

3

Solidify: fluffy ome-

lettes, baked eggs

10 - 40 min Cook with a lid on 3 – 8 %

3 -

5

Simmer rice and milk-

based dishes, heating

up ready-cooked

meals

25 - 50 min Add the minimum

twice as much liquid

as rice, mix milk

dishes part proce-

dure through

8 – 13 %

5 -

7

Steam vegetables, fish,

meat

20 - 45 min Add some table-

spoons of liquid

13 – 18 %

7 -

9

Steam potatoes 20 - 60 min Use max. ¼ l water

for 750 g of potatoes

18 – 25 %

7 -

9

Cook larger quantities

of food, stews and

soups

60 - 150

min

Up to 3 l liquid plus

ingredients

18 – 25 %

9 -

12

Gentle fry: escalope,

veal cordon bleu, cut-

lets, rissoles, saus-

ages, liver, roux, eggs,

pancakes, doughnuts

as necessa-

ry

Turn halfway through 25 – 45 %

12

-

13

Heavy fry, hash

browns, loin steaks,

steaks

5 - 15 min Turn halfway through 45 – 64 %

14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-

fry chips

100 %

Boil large quantities of water. Power function is activated.

6. CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the

glass-ceramic cause no effect on

how the appliance operates.

To remove the dirt:

1.

– Remove immediately: melted

plastic, plastic foil, and food with

sugar. If not, the dirt can cause

damage to the appliance. Use a

special scraper for the glass . Put

the scraper on the glass surface at

an acute angle and move the blade

on the surface .

– Remove after the appliance is

sufficiently cool: limescale rings ,

water rings, fat stains, shiny metal-

lic discolorations. Use a special

cleaning agent for glass ceramic or

stainless steel.

2.

Clean the appliance with a moist cloth

and some detergent.

3.

At the end rub the appliance dry

with a clean cloth.

ENGLISH 29

7. TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the

appliance or operate it.

Activate the appliance

again and set the heat

setting in less than 10

seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

The STOP+GO function

operates.

Refer to the chapter “Dai-

ly Use”.

There is water or fat

stains on the control pan-

el.

Clean the control panel.

An acoustic signal

sounds and the appliance

deactivates.

An acoustic signal

sounds when the appli-

ance is deactivated.

You put something on

one or more sensor fields.

Remove the object from

the sensor fields.

The appliance deacti-

vates.

You put something on the

sensor field

.

Remove the object from

the sensor field.

The residual heat indica-

tor does not come on.

The cooking zone is not

hot because it operated

only for a short time.

If the cooking zone oper-

ated sufficiently long to

be hot, speak to the serv-

ice centre.

The Automatic Heat Up

function does not oper-

ate.

The cooking zone is hot. Let the cooking zone be-

come sufficiently cool.

The highest heat setting

is set.

The highest heat setting

has the same power as

the Automatic Heat Up

function.

The heat setting changes

between two levels.

The Power management

is activated.

Refer to “Power manage-

ment”.

The sensor fields become

hot.

The cookware is too large

or you put it too near to

the controls.

Put large cookware on

the rear cooking zones if

necessary.

There is no signal when

you touch the panel sen-

sor fields.

The signals are deactiva-

ted.

Activate the signals. Refer

to “OffSound control”.

comes on

The Automatic Switch Off

operates.

Deactivate the appliance

and activate it again.

comes on

The Child Safety Device

or the Lock function op-

erates.

Refer to the chapter “Dai-

ly Use”.

30

www.electrolux.com

Problem Possible cause Remedy

comes on

There is no cookware on

the cooking zone.

Put cookware on the

cooking zone.

The cookware is incor-

rect.

Use the correct cook-

ware.

The diameter of the bot-

tom of the cookware is

too small for the cooking

zone.

Use cookware with cor-

rect dimensions.

The cookware does not

cover the cross / square.

Cover the cross / square

fully.

and number comes

on.

There is an error in the

appliance.

Disconnect the appliance

from the electrical supply

for some time. Discon-

nect the fuse from the

electrical system of the

house. Connect it again.

If

comes on again,

speak to the service cen-

tre.

comes on

There is an error in the

appliance because a

cookware boils dry. The

overheating protection for

the cooking zones and

the Automatic Switch Off

operates.

Deactivate the appliance.

Remove the hot cook-

ware. After approximately

30 seconds, activate the

cooking zone again. If the

cookware was the prob-

lem, the error message

goes out of the display,

but the residual heat indi-

cator can stay. Let the

cookware become suffi-

ciently cool and refer to

“Cookware for the induc-

tion cooking zone” to see

if your cookware is com-

patible with the appli-

ance.

If you tried the above solutions and can-

not repair the problem, speak to your

dealer or the customer service. Give the

data from the rating plate, three digit letter

code for the glass ceramic (it is in the cor-

ner of the glass surface) and an error

message that comes on.

Make sure, you operated the appliance

correctly. If not the servicing by a custom-

er service technician or dealer will not be

free of charge, also during the warranty

period. The instructions about the cus-

tomer service and conditions of guarantee

are in the guarantee booklet.

8. INSTALLATION

WARNING!

Refer to the Safety chapters.

Before the installation

ENGLISH 31

Before the installation of the appliance, re-

cord the information below from the rating

plate. The rating plate is on the bottom of

the appliance casing.

• Model ...........................

• PNC .............................

• Serial number ....................

8.1 Built-in appliances

• Only use the built-in appliances after

you assemble the appliance into correct

built-in units and work surfaces that

align to the standards.

8.2 Connection cable

• The appliance is supplied with the con-

nection cable.

• Replace the damaged mains cable with

a special cable (type H05BB-F Tmax

90°C; or higher). Speak to your local

Service Centre.

8.3 To attach the seal.

• Clean the worktop in the area of the cut

out section.

• Bond the seal stripe supplied on the

lower edge of the appliance along the

outer edge of the glass ceramic. Do not

extend it. Let stay the cut ends in the

middle of one side. When, you cut it to

length (add some mm), push the two

ends together.

8.4 Assembly

min.

50mm

min.

500mm

min.

2mm

< 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

> 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min. 500 mm

32

www.electrolux.com

min.

55mm

R 5 mm

380

+1

mm

880

+1

mm

min.

12 mm

min.

2 mm

min.

38 mm

min.

2 mm

9. TECHNICAL INFORMATION

Modell EHL9530FOK Prod.Nr. 949 596 022 01

Typ 58 GCD E2 AU 220 - 240 V 50 - 60 Hz

Induction 6.9 kW Made in Germany

Ser.Nr. .......... 6.9 kW

ELECTROLUX

ENGLISH 33

Cooking zones power

Cooking

zone

Nominal

Power (Max

heat setting)

[W]

Power Func-

tion activa-

ted [W]

Power func-

tion maxi-

mum dura-

tion [min]

Minimum

cookware di-

ameter [mm]

Right 2300 W 3200 W 10 125

Middle 2300 W 3200 W 10 125

Left 2300 W 3200 W 10 125

The power of the cooking zones can be

different in some small range from the da-

ta in the table. It changes with the material

and dimensions of the cookware.

10. ENVIRONMENT CONCERNS

Recycle the materials with the symbol

. Put the packaging in applicable

containers to recycle it.

Help protect the environment and human

health and to recycle waste of electrical

and electronic appliances. Do not dispose

appliances marked with the symbol

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

34

www.electrolux.com

Page is loading ...

70

www.electrolux.com

Page is loading ...

www.electrolux.com/shop

892958807-A-302013

Electrolux EHL9530FOK User manual

Electrolux EHL9530FOK User manual

in other languages

Related papers

Other documents