English
13 Amp, 7-1/4" Circular Saw
Operator’s Manual GCS130
•
When ripping, always use a rip fence or straight edge guide
•
Always use blades with correct size
•
Never use damaged or incorrect blade washers or bolts.
•
Causes and operator prevention of Kickback:
•
Do not leave the tool running.
•
When operating the tool from an elevated position,
•
Always hold the tool firmly in your hands before switching the tool “ON”.
•
Wear eye and hearing protection.
•
Protect your lungs.
WARNING: Read and understand all warnings, cautions and operating
instructions before using this product. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS