Renkforce RF-GM-PR01 Owner's manual

Category
Mice
Type
Owner's manual

Renkforce RF-GM-PR01 is a high-performance gaming mouse designed for precision and customization. With its 8 programmable buttons, you can optimize your gameplay and assign macros to enhance your in-game efficiency. The adjustable resolution of up to 8200 dpi allows you to fine-tune the sensitivity to match your preferences and game requirements. Additionally, the ergonomic design provides comfort during extended gaming sessions, reducing fatigue and strain. The customizable RGB lighting adds a personal touch to your gaming setup, allowing you to match the aesthetics to your style.

Renkforce RF-GM-PR01 is a high-performance gaming mouse designed for precision and customization. With its 8 programmable buttons, you can optimize your gameplay and assign macros to enhance your in-game efficiency. The adjustable resolution of up to 8200 dpi allows you to fine-tune the sensitivity to match your preferences and game requirements. Additionally, the ergonomic design provides comfort during extended gaming sessions, reducing fatigue and strain. The customizable RGB lighting adds a personal touch to your gaming setup, allowing you to match the aesthetics to your style.

Product overview
1
2
3
4
5
7
6
8
9
1 “Back” button
2 Resolution button
3 “Forward” button
4 Scroll wheel (with button functionality)
5 Left mouse button
6 USB connection cable
7 Right mouse button
8 Increase the volume
9 Decrease the volume
Operation
a) Connecting the mouse
Connect the mouse with the USB cable (6) to a free USB port on your computer.
The operating system will automatically search for and install the required drivers. The
mouse is now ready to use.
b) Using the mouse
The button functions are precongured by default. You can use the scroll wheel (4) and the
right (7) and left (5) mouse buttons with the same default settings as other commercially
available mice.
Press the resolution button (2) to switch between the resolutions of the mouse. The colour
scheme of the mouse illumination shows the setting of a different resolution.
A small chamber is located on the base of the mouse. Open the round cover by turning. You
can change the weight of the mouse to suit your preferences by removing and reinserting
the weights. The six cylindrical individual weights are magnetic in order to prevent them from
falling out easily. Store any weights you remove safely.
Congure the mouse using the accompanying software. Assign functions to the buttons of
the mouse according to your preferences. You can change the button settings using the
accompanying software and user proles.
c) Installing the software
Ensure that the mouse is connected to your computer before installing the software.
You must have administrator rights to carry out installation. Insert the CD for the mouse
function setup program (enclosed) into a CD ROM drive that is connected to your computer.
Click on the installation le for the setup program to install it. Follow all the on-screen
instructions.
Restart your computer to complete the software installation.
d) Personalising and conguring the mouse
You must have administrator rights to use the software. Open the ‘Ultimate Gaming Mouse
Driver’ software to congure the mouse according to your preferences.
You can personalise up to ve different conguration proles. To dene a prole, select the
prole (1 to 5) by clicking on it. You can load predened, stored proles (click on ‘Load
Prole’) or save self-dened proles (click on ‘Save Prole’).
Click on the corresponding setting button in the upper menu bar to congure the setting
parameters for a prole. The following setting categories are available for each prole:
- Light setting
- Sensitivity
- System setting - button behaviour
- Advanced setting
- Button setting - button assignment (including macros)
Operating instructions
RF-GM-PR01 GAMING MOUSE
Item no. 1620175
Intended use
The gaming mouse is designed to operate a computer. It features eight buttons and a clickable
scroll wheel. The input commands are transmitted to a receiver, which connects to a USB 2.0
port on your computer. The enclosed software is used to set and personalise the various mouse
parameters and the button assignments.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using
the product for purposes other than those described above may damage the components. In
addition, improper use can cause hazards such as a short circuit or re. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
Mouse
Software CD
Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
Always observe the safety information and operating instructions of any other
devices which are connected to the product.
Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
Maintenance, modications and repairs must be carried out by a technician or a
specialist repair centre.
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Attention, invisible laser light at the optical sensor:
- Do not look into the beam directly or with optical instruments!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1620175_v1_0618_02_DS_m_4L_(1)
Light setting
You can choose between ‘illuminated’ and ‘unilluminated’.
You can select between pulsating and permanently fully illuminated illumination types.
Sensitivity
You can set the synchronisation in the x and y direction (click on the box and set the slider).
Resolutions from 1000 to 8200 dpi can be selected (click on the box click and set the slider).
System setting - button behaviour
Change the button behaviour of the mouse such as double clicking, cursor accuracy, scrolling
speed.
Advanced setting
Sampling rate (click on the box and set the slider).
On-To-Go speed
Reset to factory settings (click)
Button setting - button assignment
You can individually set the button assignments here. The current setting is shown in the
drop-down menu. The assigned button is also shown in the mouse model in the centre of the
software interface, highlighted in colour.
Click on the drop-down menu and select a different setting or function assignment.
From the toolbar in the drop-down menu, you can assign and set new macros ‘Assign Macro’,
set multimedia functions ‘Multimedia’, change your dened proles ‘Prole’ and mouse
resolutions ‘DPI switch’ by a simple press of a button or assign different basic functions of the
Windows
®
operating system to certain buttons under ‘Windows’.
Conrm the respective setting by pressing the ‘Apply’ button or cancel with ‘Cancel’. This
completes setting (without changes, if applicable). The ‘OK’ button also ends the program.
At least one button should be set to the ‘Click’ function.
To exit the software, press ‘Cancel’ or ‘OK’ to conrm.
Care and cleaning
Always disconnect the product from the power supply (USB port) before cleaning it.
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
Use a dry, lint-free cloth to clean the product.
Check the optical sensor from time to time. If dust has settled on it, remove the dust with a
soft brush.
Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. Always dispose of the product according to the relevant statutory
regulations.
You thus full your statutory obligations and contribute to protection of the environment.
Technical data
Input voltage/current ..................... via USB, 5 V/DC, 500 mA
Illumination ................................... 6 variable LEDs
Frames ......................................... 12000/s
Mouse acceleration ...................... max. 30 G
Sample rate .................................. 1000 Hz
Cable length ................................. 160 cm
Sensor .......................................... A9800 (laser)
Sensor resolution .......................... 1000/1600/2400/3200/4000/8200 dpi
Service life .................................... 5,000,000 x mouse button actuations
System requirements .................... Windows
®
2000, XP (Home, Pro, with SP1, SP2, SP3)
(32 Bit), Vista™ (32 Bit), 7 (32/64 Bit), 8.0 (32/64 Bit),
8.1 (32/64 Bit), 10.0 (32/64 Bit), 10 S
Operating conditions ..................... +45 ºC, 60 - 80 % relative humidity (non-condensing)
Storage conditions ........................ +65 ºC, 60 - 90 % relative humidity (non-condensing)
Dimensions (L x W x H) ................ 133.94 x 80.22 x 42.16 mm
Weight .......................................... 159 g
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Renkforce RF-GM-PR01 Owner's manual

Category
Mice
Type
Owner's manual

Renkforce RF-GM-PR01 is a high-performance gaming mouse designed for precision and customization. With its 8 programmable buttons, you can optimize your gameplay and assign macros to enhance your in-game efficiency. The adjustable resolution of up to 8200 dpi allows you to fine-tune the sensitivity to match your preferences and game requirements. Additionally, the ergonomic design provides comfort during extended gaming sessions, reducing fatigue and strain. The customizable RGB lighting adds a personal touch to your gaming setup, allowing you to match the aesthetics to your style.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI