Taurus HOME AC 351 Owner's manual

Page is loading ...

English

not be made by children unless they are

supervised.

- The appliance shall be installed in

accordance with national wiring

regulations

- If the connection to the mains has been

damaged, it must be replaced, take the

appliance to an authorised technical

support service. Do not attempt to

disassemble or repair the appliance by

yourself in order to avoid a hazard.

- The appliance requires suitable

ventilation in order to work properly.

Leave a space of 50cm between walls

or other obstacles

- Do not cover or obstruct the sides of

the appliance, and leave a minimum

space of 50cm front other walls, ceiling.

- Ensure that the voltage indicated on the rating

label matches the mains voltage before plugging

in the appliance.

- Connect the appliance to a base with an earth

socket withstanding a minimum of 10 amperes.

- The appliance’s plug must fit into the mains

socket properly. Do not alter the plug. Do not use

plug adaptors.

Portable Air Conditioner

AC 280

Dear customer,

Many thanks for choosing to purchase a TAURUS

ALPATEC brand product.

Thanks to its technology, design and operation

and the fact that it exceeds the strictest quality

standards, a fully satisfactory use and long

product life can be assured.

Description

Remote control

1 On/Off

2 Timer

3 Down

4 Mode

5 Up

6 Fan

7 Sleeping

8 Swing

Panel Control

a. Power indicator

b. Water full indicator

c. Cool indicator mode

d. Dehumidifier indicator mode

e. Fan indicator mode

f. Timer indicator

g. Up/ down indicator

h. High speed indicator

i. Mid speed indicator

j. Low speed indicator

k. Sleep indicator

l. Swing indicator

- Read these instructions carefully before

switching on the appliance and keep them for

future reference. Failure to follow and observe

these instructions could lead to an accident.

Safety advice and warnings

- This appliance can be used by

children aged from 8 years and above

and persons with reduced physical,

sensory or mental capabilities or lack of

experience and knowledge if they have

been given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved.

- This appliance is not a toy. Children

should be supervised to ensure that

they do not play with the appliance.

- Cleaning and user maintenance shall

A Control panel

B Air outlet

C Fan blade

D Castor wheels

E Filter frame upper

F Exhaust connector

G Filter frame lower

H Power cord

I Exhaust hose

J Slide bar connector

K Remote control

(Batteries not included)

English

- Do not force the power cord. Never use the

power cord to lift up, carry or unplug the appliance.

- Do not wrap the power cord around the appliance.

- Do not clip or crease the power cord.

- Do not allow the power cord to hang or to come

into contact with the hot surfaces of the appliance.

- Check the state of the power cord. Damaged or

tangled cables increase the risk of electric shock.

- As an additional protection to the electrical

supply for the appliance, it is advisable to have

a differential current device with a maximum

sensitivity of 30 mA. Ask for advice from a

competent installer.

- Do not touch the plug with wet hands.

- Do not use the appliance if the cable or plug is

damaged.

- If any of the appliance casings breaks,

immediately disconnect the appliance from the

mains to prevent the possibility of an electric

shock.

- Do not use the appliance if it has fallen on the

floor, if there are visible signs of damage or if it

has a leak.

- Use the appliance in a well ventilated area.

- If other gas or fuel appliances can be used at the

same time in the room where the appliance is to

be used, that room must be well ventilated.

- Do not place the appliance where it can reach

the sunlight.

- Place the appliance on a horizontal, flat, stable

surface away from heat sources and contact with

water (splashes etc.)

- Do not use or store the appliance outdoors.

- Do not leave the appliance out in the rain

or exposed to moisture. If water gets into the

appliance, this will increase the risk of electric

shock.

- CAUTION: Do not use the appliance near water.

- Do not force the power cord. Never use the

power cord to lift up, carry or unplug the appliance.

- Keep the appliance away from heat sources and

sharp edges.

Use and care:

- Fully unroll the appliance’s power cable before

each use.

- Do not use the appliance if the on/off switch does

not work.

- Do not remove the support feet of the appliance.

- Do not move the appliance while in use.

- Use the appliance handle, to catch it or move it.

- Do not turn the appliance over while it is in use or

connected to the mains.

- Unplug the appliance from the mains when not

in use and before undertaking any cleaning task.

- This appliance is for household use only, not

professional, industrial use.

- Store this appliance out of the reach of children

and/or those with reduced physical, sensory or

mental abilities or unfamiliar with its use

- Do not expose the appliance to extreme

temperatures.

- Keep the appliance in a dry, dust-free place, out

of direct sunlight.

- Never leave the appliance connected and

unattended if is not in use. This saves energy and

prolongs the life of the appliance.

- Any misuse or failure to follow the instructions for

use renders the guarantee and the manufacturer’s

liability null and void.

Installation

- Be sure to remove all packaging

material from inside the appliance.

- Respect the legal provisions

concerning safety distances from other

elements such as pipes, electrical

connections, etc.

- Ensure that the appliance is level with

respect to the floor.

- The appliance requires suitable

ventilation in order to work properly.

Leave a space of 50cm between walls

or other obstacles. (Fig 1)

- Do not cover or obstruct any of the

openings of the appliance.

- Do not cover or obstruct the sides of

the appliance, and leave a minimum

English

space of 50cm front other walls, ceiling.

- The plug must be easily accessible so

it can be disconnected in an emergency.

- To achieve the highest efficiency from

the appliance it should be situated

in a place where the atmospheric

temperature is between 12 and 32ºC.

- Ensure that the extraction pipe remains

in a horizontal position. (Fig 2)

- Do not add new sections to the

extraction tube provided, as it could

cause the appliance to malfunction.

- The appliance should be used with its

base feet fitted.

- The appliance should be used with its

wheels attached.

Assembly of the exhaust hose

- Lengthen one head

of the hose, and spin

the exhaust hose into

exhaust connector

(counter-clockwise).

Instructions for use

Use:

- Unroll the cable completely before plugging it in.

- Connect the appliance to the mains.

- Press the ON/OFF button, the unit will enter in

cooling mode with low fan speed.

- Press the mode button to select cooling

dehumidifying, fan and heating mode.

Fan Speed:

- Under the cooling and the fan mode, the speed

goes as follow:

- Lower Fan-> Mid Fan-> High Fan.

- Under the dehumidifying mode, fan is working

in low speed.

Timer function:

- The appliance´s operating time can be controlled

from 1~24h.

- Press that button. If you press the button once,

the appliance will working 1 hour, if you press

twice, 2 hours etc up to 24 hours.

- Auto-shut off timer is only available when the

unit is on.

- Under the cooling and heating mode, the setting

temperature ranges from 16º~31ºC.

Swing:

- Press this button to control the movement of the

louver.

Cooling mode:

- Press mode to select cooling mode, cooling

mode indicator turns on.

- Press Up or Down to adjust temperature from

16ºC to 31ºC.

- Press speed to select high or low fan speed.

Fan mode:

- Press mode to select fan mode fan indicator

turns on.

- Press speed to select high speed or low speed.

- Temperature and sleeping function cannot be

setup.

Dehumidifying mode:

- Press “MODE” to select dehumidifying mode,

dehumidifying mode indicator turns on.

- Under dehumidifying mode, sleeping function

cannot be setup, and fan speed is low.

Sleeping mode:

- Press key “SLEEP” enters into sleeping mode,

default value of fan speed is low.

- When sleeping mode turns on , under cooling

mode, the first one hour later, setting temperature

will go up 1ºC, the second one hour later, setting

temperature will go up another 1ºC, and then keep

the same .

- Sleeping mode is invalid under dehumidifying

and fan mode. Under water full, machine standby

and mode conversion, sleeping mode will be

cancelled.

Compressor protection:

- Three minutes later after power on / restart,

compressor starts to run.

English

Water tank full protection:

- When the water level in the bottom water plate

is above the warning level, the unit will alert

automatically a.

-Please discharge water in the machine according

to chapter “water drainage”.

Water drainage:

- When the inner water tank is full, its indicator will

flash on the screen.

- The appliance enters into standby mode.

- Pull out the plug to drain out water, power off

the machine and restart it , the machine will runs

normally.

-This model have self evaporative function,

under cooling mode, please do not use continue

drainage to get better cooling effect.

Once you have nished using the appliance:

- Turn the appliance off, using the on/off switch.

- Unplug the appliance from the mains.

Cleaning

- Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

- Clean the electrical equipment and the mains

connection with a damp cloth and dry. DO NOT

IMMERSE IN WATER OR ANY OTHER LIQUID.

- Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products, for

cleaning the appliance.

- Never submerge the appliance in water or any

other liquid or place it under running water.

- If the appliance is not in good condition of

cleanliness, its surface may degrade and

inexorably affect the duration of the appliance’s

useful life and could become unsafe to use.

Air lter cleaning:

- Clean the air filters every 2 weeks. If the air filter

is blocked with dust, the efficiency will reduce.

- Pull out up and down filter as below pictures

- Wash the air filters by immersing it gently into

warm water with a neutral detergent, rinse it and

dry it thoroughly in a shaded place.

- Install air filters carefully after cleaning the filters.

After Season Maintenance:

- Pull out the plug in drainage hole and empty the

water received plate, or drain out the water by

leaning the unit, then shift the unit mode to Fan

mode, and press the button till it low fan speed.

-Keep this mode for half day till the conduit is

dried. Doing like this can keep the inner unit dried

and not go mouldy.

- Turn off the unit and pull out the plug.

- Coil the wire and bind it together, then put it into

the accessories room.

- Separate the air-exhausted pipe and safely

keep it.

- Put the unit into a plastic bag, and then keep it

in a dried place.

- Take out the batteries of remote control and

safely keep them.

Anomalies and repair

- Take the appliance to an authorised technical

support service if product is damaged or other pro-

blems arise.

Do not attempt to disassemble or repair the

appliance yourself as this may be dangerous.

- If any anomaly is detected, check the following

table:

English

For EU product versions and/or in case that

it is requested in your country:

Ecology and recyclability of the product:

- The materials of which the packaging of this

appliance consists are included in a collection,

classification and recycling system. Should you

wish to dispose of them, use the appropriate pu-

blic recycling bins for each type of material.

- The product does not contain concentrations of

substances that could be considered harmful to

the environment.

- This symbol means that in case you

wish to dispose of the product once

its working life has ended, take it to an

authorized waste agent for the selecti-

ve collection of Waste from Electric and

Electronic Equipment (WEEE).

This appliance complies with Directive 2014/35/

EC on Low Voltage, Directive 2014/30/EC on

Electromagnetic Compatibility and Directive

2011/65/EU on the restrictions of the use of cer-

tain hazardous substances in electrical and elec-

tronic equipment.

Anomalies Causes Solutions

The unit does not

work

- No power supply

- Water full indicator illuminate

- Turn on the appliance

- Drain out the inner stored water

The unit does not

seem to perform

- Indirect sunlight

- Window or doors open

- Filter is very dirty

- Air inlet or air outlet is blocked

- Room temperature is lower than the

setting one.

- Draw the curtains

- Close windows and turn on another

air conditioner

- Clean or change the air filter

- Clean out the stemming

- Change the temperature setting

The unit noise is too

high

- The unit is not put on a flat surface - Put the unit on a flat and stable

surface that can support its weight

Compressor does

not work

- Heat exceeded protection is active - Re start the unit 3 minutes later till

the temperature low down

Page is loading ...

Taurus HOME AC 351 Owner's manual

This manual is also suitable for

Taurus HOME AC 351 Owner's manual

in other languages

Related papers

Other documents