SATCO:Satco TH411 Installation guide

Hello! I've reviewed the installation instructions for the Satco/Nuvo track lighting fixtures. This document outlines the process of installing a track head, including how to identify polarity, locking direction, and how to insert and lock the adapter. I am ready to answer your questions about the installation process.
How to identify polarity of the track?

How to identify the locking direction?

How to insert the adapter?

How to lock the adapter?

INSTALLATION INSTRUCTIONS

A SATCO PRODUCT

*PLEASE

NOTE: TRACK

HEAD MODEL

PICTURED

MAY DIFFER

FROM ACUTAL

MODEL

RECEIVED.

TURN OFF POWER

SINK

Installation for Satco/Nuvo Track: (Fig.1)

1. The track has a groove (Sink) running its length to indicate polarity and

the locking tab has an arrow indicating locking direction.

2. Insert adapter into track slot. The arrow should point away

from the grooved (Sink) side of the track.

3. Push up and rotate the adapter into the lock position.

4. Reverse procedure to remove. The fixture may be positioned

anywhere along the track.

Fig.1