Symmons 35-2DIV-CYL-BBZ-TRM Installation guide
- Category
- Wall & ceiling mounts accessories
- Type
- Installation guide
35-2DIV-CYL-TRM, 35-3DIV-CYL-TRM
Dia® Diverter Trim Series
Operation & Maintenance Manual
Model Numbers Specifications
35-2DIV-CYL-TRM Dia Dual Outlet Diverter Trim
35-3DIV-CYL-TRM Dia Triple Outlet Diverter Trim
Dual and triple outlet diverter trim made from metal and
plastic materials plated in standard polished chrome
nish.
Modifications Compliance
Note: Append appropriate -sufx to model number.
-ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Dimensions
Note: Dimensions are subject to change without notice.
Measurements
A Ø 5”, 127 mm
B 3 1/8”, 80 mm
C 2 7/8”, 72 mm
BB
C
C
AA
-BBZ Brushed Bronze finish
-MB Matte Black finish
-STN Satin Nickel finish
2
35-2DIV-CYL-TRM, 35-3DIV-CYL-TRM
Dia® Diverter Trim Series
Operation & Maintenance Manual
Parts Breakdown
Replacement Parts
Item Description Part Number
A
B
Handle Assembly
Set Screw T-242A
C Dome Cover T-19
D
E
F
Diverter Escutcheon
Screws
Mounting Plate
Diverter Escutcheon Kit
T-416A
Note: Append -sufx to part number for premium
nish.
Required for Installation
Phillips head screwdriver
Allen wrench (3/16")
F
DE
A
C
B
3
Note: For rough-in installation,
please see valve body installation
guide.
1)
Install plastic mounting plate (F)
Secure with two screws (E).
2) Attach diverter escutcheon (D) to
plastic mounting plate (F).
Note: Tabs should snap into place.
3) Install dome cover (C) to valve by
turning clockwise.
4) Install diverter handle (A)
to valve. Secure handle by
tightening Allen screw (B).
Note: Handle should be facing the
6 o'clock position.
35-2DIV-CYL-TRM, 35-3DIV-CYL-TRM
Dia® Diverter Trim Series
Operation & Maintenance Manual
Installation
1
2
E
F
1
2
C
1
2
AB
D
F
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
Symmons Industries, Inc. 31 Brooks Drive
■
Braintree, MA 02184
■
Phone: (800) 796-6667
■
Fax (800) 961-9621
Copyright © 2019 Symmons Industries, Inc.
■
symmons.com
■
■
ZV-3016 REV B
■
111319
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects, or
other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
POSITION 1 POSITION 2
1) Cartridge is factory set to divert
to function 1.
2) Turn handle to position 2 to divert
to function 2.
3) Turn handle to position 3 to share
functions 1 and 2.
POSITION 3
Note: Additional handle positions for same output are illustrated.
Operation (Diverter Control: 3DIV-BODY)
1) Cartridge is factory set to divert
to function 1.
POSITION 2
2) Turn handle to position 2 to divert
to function 2.
POSITION 1 POSITION 3
POSITION 6
3) Turn handle to position 3 to divert
to function 3.
6) Turn handle to position 6 to share
functions 1 and 2.
5) Turn handle to position 5 to share
functions 1 and 3.
POSITION 5
POSITION 4
4) Turn handle to position 4 to share
functions 2 and 3.
Operation (Diverter Control: 2DIV-BODY)
-
1
-
2
-
3
-
4
Symmons 35-2DIV-CYL-BBZ-TRM Installation guide
- Category
- Wall & ceiling mounts accessories
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI