Sunricher SR-2303BWP(US) User manual

Type
User manual
Waterproof DALI dimmer 09.2303W.04073
1 2
Set DALI Address Manually Via Buttons
1.1. Press and hold down any of the two buttons until numeric digital display flashes, then release the button.
Operation
DALI Controller
Line 1
Line 1
Line 2
LED OUTPUT
Red :V+
Black : V-
Green : D-
White : D+
Line 2
LED OUTPUT
Black : V+
Red :R-
Green : G-
Yell ow :B-
White : W-
Red :V+
Black : V-
Green : D-
White : D+
DALI
Master
V+
V- DC Power input/output
DALI signal input/output
Input
Voltage Remarks
Output
Current
12-36VDC Constant voltage
4x(60-180)W
4x5A
Output
Power
12-36VDC Constant current
4x(4.2-12.6)W
4x350mA
12-36VDC Constant current
4x(8.4-25.2)W4x700mA
No.
1
2
3
Function introduction
Product Data
Size(LxWxH)
180.5x73.6x38mm
DO NOT install with power applied to device.
This device is IP67 rating and protected against damp environment.
Safety & Warnings
Important: Read All Instructions Prior to Installation
180.5x73.6x38mm
180.5x73.6x38mm
Wiring Diagram
Match all DALI system in the market
Manual /automatically DALI address setting
DALI address digital indicate
Four channels, can set addresses from one to four.
To work with power repeater to expand output power unlimitedly.
Waterproof grade:IP67
Common Anode Output(+)
CH 3:B output(-)
CH 4:W output(-)
CH 1:R output(-)
CH 2:G output(-)
L
N
G
V+
V-
OUTPUT
INPUT
AC Power
50/60Hz
12V/24V/36V
CV PSU
D-
D+
D-
D+
V+
V- DC Power input/output
DALI signal input/output
D-
D+
Set DALI Address Quantity
1.1. Press and hold down both of the two buttons until numeric digital display flashes, then
release the button.
1.2. Click first button to select “1A, “2A”, “3A” or “4A” which means 1 address, 2 addresses, 3
addresses or 4 addresses.
1.3. Then press and hold down any of the 2 buttons until the numeric digital display stops
flashing to confirm the setting.
For example, when we set address to 22:
When select 1A, all four channels will be the same address 22.
When select 2A, channel 1 & 3 will be the same address 22, channel 2 & 4 will be the same
address 23.
When select 3A, channel 1, 2, 3 will be address 22, 23, 24 respectively, and channel 4 address is
also 24.
When select 4A, channel 1, 2, 3, 4 will be address 22, 23, 24, 25 respectively.
DALI Controller
Lin e 1
Lin e 1
Lin e 2
LED O UTPUT
Red : V+
Bla ck :V-
Gre en :D-
Whi te :D+
Lin e 2
LED O UTPUT
Bla ck :V+
Red : 1-
Gre en :2-
Yell ow :3-
Whi te :4-
Red : V+
Bla ck :V-
Gre en :D-
Whi te :D+
DALI Controller
Lin e 1
Lin e 1
Lin e 2
LED O UTPUT
Red : V+
Bla ck :V-
Gre en :D-
Whi te :D+
Lin e 2
LED O UTPUT
Bla ck :V+
Red : 1-
Gre en :2-
Yell ow :3-
Whi te :4-
Red : V+
Bla ck :V-
Gre en :D-
Whi te :D+
DALI Address Assigned by DALI Masters
DALI address can also be assigned by DALI Master controller automatically, please refer to user manuals of
compatible DALI Masters for specific operations.
Note: The digital display will show When the DALI master is assigning addresses.
V+ V+
R- R-
G- G-
B- B-
W- W-
V+ V+
R- R-
G- G-
B- B-
W- W-
1.2. Click any of the two buttons once to select a digit, click again to change the digit until the desired DALI
address appears. Click first button to set “tens” position and second button to set “units” position. The address
can be set from 00~63.
1.3. Then press and hold down any of the 2 buttons until the numeric digital display stops flashing to confirm the
setting.
Note: DALI address can be manually assigned from 00-63-FF, by factory defaults, no DALI address is
assigned for the dimmer, and the display shows . Setting DALI address as will reset the
dimmer to factory defaults.
  • Page 1 1

Sunricher SR-2303BWP(US) User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI