EZ Niche ALRNDIV Installation guide

Hello! I've reviewed the installation guide for the Alpinebay EZ-NICHES Divider. This document provides instructions on how to install the divider, which is designed to fit a 14x22 inch niche and be tiled over. The divider is secured using silicone or caulking and then further secured with tile using modified thin-set mortar. I am here to answer any questions you may have about the product or the installation process.
What size niche is the EZ-NICHES Divider designed for?

How is the EZ-NICHES Divider secured in place?

What material is used to adhere the tile to the EZ-NICHES Divider?

Installation guide for EZ-NICHES DIVIDER

Materials Needed:

- EZ-NICHES Divider

- Silicone or caulking

- Modified thin-set mortar

- Tile and grout

Installation Instructions:

1. Apply silicone or caulking on the back of the EZ-NICHES Divider.

2. Place the Divider into the EZ-NICHES at your desired height.

3. Press the Divider firmly against the EZ-NICHES installation system to ensure a tight fit.

4. Use modified thin-set mortar to adhere tile directly onto the Divider. Follow the manufacturer's

instructions for mixing and application of the mortar.

5. Once the tile is installed, the Divider will be secured in place and will prevent any movement or shifting.

6. Allow the mortar to dry and set completely before grouting the tile. Follow the manufacturer's

instructions for mixing and application of the grout.

Note: The EZ-NICHES Divider is presloped and cut to fit into the 14X22 size niche, making it easy to

install and tile directly over. Apply silicone or caulking to hold it in place, and once you tile over it, the tile

will keep it secure and prevent it from moving.

Alpinebay, Inc | 1668 EL Pinal Drive, Stockton CA 95205 | [email protected]

Office: 209-462-1818 Fax: 209-462-8888