TROUBLE SHOOTING
Problem Possible Solution
Couldn't
Power On
1. Please confirm that if there's any water leaked in the
unit or the internal components get damaged.
2. Please put the new battery in(use 1 AAA battery).
We recommend using high quality batteries for the
best product performance. Heavy duty or rechargeable
batteries are not recommended.
Inaccurate
Temperature
/ Humidity
Couldn't Use
It Outside
Care And
Maintenance
1. Make sure the main unit is placed out of direct sunlight
and away from any heat sources or vents.
2. Make sure the display is positioned away from
moisure sources.
3. Do not tamper with the internal components.
4. Temperature accuracy: -9.9°C ~ 0°C: ± 2°C
0°C ~ +50°C: ±1°C
5. Humidity accuracy: +/- 5 % RH (40%RH to 80%RH);
+/- 8 % RH (20%RH to 40%RH, 80%RH to 95%RH)
Note: Other ranges are for reference only.
Numbers Of
Temperature
and Humity
Flashed
If you have just received the product, please leave it
for a few hours after disassembly and installation.
This is an indoor thermometer measuring the indoor
temperature and humidity. You can view the other
Geevon products on Amazon to choose what you need.
1. Do not clean any part of the product with
benzene,thinner or other solvent chemicals. When
necessary, clean it with a soft cloth.
2. Never immerse the product in water. This will
damage the product.
3. Do not subject the product to extreme force, shock,
or fluctuations in temperature.
If your Geevon product does not operate properly after trying the
troubleshooting steps, contact the seller on your order page or shoot
4. Humidity resolution: ±1 %RH
Accuracy:
1.Temperature accuracy: -9.9°C ~ 0°C: ± 2°C
0°C ~ +50°C: ±1°C
2.Humidity accuracy: +/- 5 % RH (40%RH to 80%RH);
+/- 8 % RH (20%RH to 40%RH, 80%RH to 95%RH)
Note: Other ranges are for reference only.
Time setting:
1. In the standard mode, press button to enter the time setting. The
setting order is: Year→Month→Day→Hour→Minute→Exit.
2. In set, press ▲ button to go ahead by once.
3. In set, press ▼ button to back by once.
4. After the setting is completed, press button or do not press any
button for 15 seconds to exit the setting mode.
Comfort Display:
DRY: any temperature, the humidity <= 29%.
COMFORT: any temperature, the humidity is between 30% and 69%.
WET: any temperature, the humidity >= 70%.