2. FLEXCO
  3. Alligator Rivet Pin Replacement for 15004/15005

FLEXCO Alligator Rivet Pin Replacement for 15004/15005 Operating instructions

  • Hello! I've reviewed the pin replacement instructions for FLEXCO models 15004 and 15005. This document details the specific pin sizes and quantities required for each model, as well as the correct procedures for pin insertion, including how far each pin should extend from the tool's surface. I'm prepared to answer any questions you have regarding these instructions.
  • What size pins are used for model 15004?
    What size pins are used for model 15005?
    What tool should be used for pin insertion?
    How far should the 3/16" x 3/4" pin protrude after insertion?
    How far should the 3/16" x 1/2" pin protrude after insertion?
    How far should the 3/32" x 3/4" pin protrude after insertion?
Pin Description Quantity
15004 15005
3/32” x 3/4” 8 16
3/16” x 1/2” 3 7
3/16” x 3/4” 1 1
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 U.S.A.
Tel: 1-630-971-0150 • Fax: 1-630-971-1180 • E-mail: info@exco.com • Web: www.flexco.com
©2012 Flexible Steel Lacing Company. 03-12. For Reorder: X2712
1. Insert 3/16” x 3/4” pin as shown.
Hold pin with needle nose pliers. Gently
tap pin in place until 1/4” remains above
the tool surface.
2. Insert 3/16” x 1/2” pin as shown.
Hold pin with needle nose pliers. Gently
hammer pin until .100” remains above the
tool surface. Repeat for all pins this size.
3. Insert 3/32” x 3/4” pins into the
proper position as shown. Hold pin with
needle nose pliers. Gently tap pin in
place until .250” remains above the tool
surface. Repeat for all pins this size.
Pin Replacement for 15004/15005
Instructions
X2712
Pin Replacement for 15004/15005
Instructions
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 U.S.A.
Tel: 1-630-971-0150 • Fax: 1-630-971-1180 • E-mail: info@exco.com • Web: www.flexco.com
©2012 Flexible Steel Lacing Company. 03-12. For Reorder: X2712
Pin Description Quantity
15004 15005
3/32” x 3/4” 8 16
3/16” x 1/2” 3 7
3/16” x 3/4” 1 1
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 U.S.A.
Tel: 1-630-971-0150 • Fax: 1-630-971-1180 • E-mail: info@exco.com • Web: www.flexco.com
©2012 Flexible Steel Lacing Company. 03-12. For Reorder: X2712
1. Insert 3/16” x 3/4” pin as shown.
Hold pin with needle nose pliers. Gently
tap pin in place until 1/4” remains above
the tool surface.
2. Insert 3/16” x 1/2” pin as shown.
Hold pin with needle nose pliers. Gently
hammer pin until .100” remains above the
tool surface. Repeat for all pins this size.
3. Insert 3/32” x 3/4” pins into the
proper position as shown. Hold pin with
needle nose pliers. Gently tap pin in
place until .250” remains above the tool
surface. Repeat for all pins this size.
Pin Replacement for 15004/15005
Instructions
Pin Replacement for 15004/15005
Instructions
X2712
/