2. Computers & electronics
  3. Telecom & navigation
  4. Mobile device chargers
  5. PowerWalker
  6. 700-1400VA Portable Power Station

PowerWalker 700-1400VA Portable Power Station User manual

  • Hello! I've reviewed the user manual for the PowerWalker PPS THR Series (700-1400VA) portable power station. This document details the device's features such as the LCD display, multiple output options including USB-C, USB-A, AC, and car supplementary output, and its ability to charge via solar panels or car input. I understand how the device operates and I am prepared to help you with any questions you have.
  • How do I turn on the DC output?
    How can I charge the device using solar panels?
    What does the orange ambient light indicate?
    What is the maximum power usage of appliances on AC output.
PowerWalker PPS THR Series
(700-1400VA)
Portable Power Station
1 Folding handle 9 USB-C
2 LCD 10 Light and switch
3 Ambient light sensing 11 USB-A
4 Power switch/setting 12 AC input
5 Ambient light 13 Breaker
6 DC switch 14 AC output
7 AC switch 15 Car supplementary output
8 Solar/car input 16 Air inlet/outlet
No
Dame
Description
1
Folding
handle
Easy to fold
2 LCD
1.Display the power and status of the product;
2.LCD backlight will be turned on or off according to the
product usage status.
3
Ambient light
sensing
The brightness of LCD backlight is automatically adjusted
according to the intensity of ambient light.
4 Power
switch/setting
Short press for 0.1~1s
1.Turn on the MPS(mobile power station);
2.Wake up LCD and ambient light;
3.When the product beeps for alarm, mute;
Press the key twice within 1.5s
turn off ambient light.
Press the button for 4 ~10s, enter function setting mode
1.Short press the button to switch between superfast charging
mode, ECO mode and UPS mode;
2.Select UPS mode, press the button for 1~4s, short press to
select ON or OFF, press the button again for 1~4 seconds to
complete the setting;
3.No press for 10 seconds or press the button again for 4~ 10s
will exit the setting interface;
5 Ambient light
3 colors: white,blue,orange
1.The brightness of the white light changes gradually,
indicating the discharging mode;
2.The brightness of the blue light changes gradually, indicating
the charging mode;
3.The blue light is always on, indicating that the battery is fully
charged;
4.The brightness of the orange light changes gradually,
indicating the failure mode;
5.The ambient light is always off, indicating that the MPS is in
standby mode or off;
6.Press the power switch twice within 1.5s, you can turn off
the ambient light, and short press once to wake up it.
6 DC switch
1.Short press the switch button to enable or disable USB-C (9),
USB-A (11) and car supplementary output (15);
2. When DC output is enabled, the DC indicator light will be on.
7 AC switch
1.Short press the switch button to enable or disable the AC
output;
2. When AC output is enabled, the AC indicator light will be
on.
8 Solar/car input
1.Connect the cigarette lighter port of the car to the MPS
through the car charger wire, charge MPS;
2. If you purchased the solar panel, connect it to the input
through solar charging wire, charge the MPS.
9 USB-C
You can charge type-C interface devices such as PC and mobile
phone.
10 Light and
switch
1.Short press the switch to turn on or off;
2. Press the switch 4s to enter the SOS mode, short press it
again to exit the SOS mode.
11 USB-A You can charge type-A interface devices such as PC and mobile
phone.
12 AC input
1.AC power wire connect to AC source (wall plug e.g.).;
2. The MPS has UPS function, which means that you can use it
as UPS when the grid suddenly failure, MPS can automatically
and quickly switch to the battery mode to power your device
uninterruptedly.
13
Breaker
AC overcurrent protection (key recovery).
14 AC output
1.Support 2-pin or 3-pin AC plug power devices, such as PC,
TV, mini-fridge, vacuum cleaner, etc.;
2. Support Reduced power usage of appliances exceeding
1400W (does not support all excess appliances, need to test to
confirm it can be used, so as not to affect your work life).
15
Car
supplementary
output
1.Support output of 13.6V/10A, which can power car
appliances;
2. Recharge the 12V lead-acid battery of the car (note the
polarity of the battery).
16
Air inlet/outlet
Air inlet and outlet to dissipate heat inside the product.
Turn-on Instruction
1.Please short press "LCD button (4)”.
2.Short press "DC output switch (6)" within 10s to turn on the DC output.
3.Short press "AC output switch (7)" to turn on the AC output.
4. The corresponding indicator lights up.
5. Interval over 10s, MPS will automatically turn off.
Turn-off Instruction
1.Short press "DC output switch (6)" to turn off the DC output.
2.Short press "AC output switch (7)" to turn off the AC output.
3. The corresponding indicator lights off.
4.The MPS will automatically turn off within 10 ~ 45s.
LCD display
Super fast charging
ECO(energy saving mode)
UPS
Charge and discharge time
A Operating mode
B Charge and discharge time
Note:
Enable ECO (energy-saving mode), the MPS operates in the battery discharge
mode.
If the AC load is less than 60W and the duration exceeds 1hours, the AC output
will automatically turn off.
If the DC load is less than 10W and lasts for more than 5 hours, the DC output will
automatically turn off.
Abnormal temperature
Abnormal AC input
Abnormal AC output
AC overload
Abnormal AC charging
Remaining battery percentage
Remaining battery icon
AC charging
DC charging
Charging power
Discharging power
/