AF Lighting 9123-TL Installation guide

Installation Instruction

Item No: 9122-TL & 9123-TL

1. Carefully unpack and take out the parts as picture shown.

2. Place the screw (B) through lock washer (C), iron washer (D), marble base (E), iron sheet (F) into the steel

pipe (G), then tighten the screw (B) with the wrench (A).

3. Place the wheel (H) through the steel pipe, then place the screw (J) through the holes of the steel pipe into

the wheel (H) and tighten with screwdriver (K).

4. Screw the turn-knob (L) through steel pipe (G) into the wheel (H).

5. Place the fabric shade (N) onto the socket (M), then secure with the socket ring (O).

Note: Swing turn-knob (L) is for adjusting arm (I) up and down only, not side to side.

Note: 120V/100W

This manual is also suitable for