2. AF Lighting
  3. 9122-TL

AF Lighting 9122-TL, 9123-TL Installation guide

  • I have reviewed the installation instructions for the 9122-TL and 9123-TL lamps. This document outlines the step-by-step assembly process, including the use of various components like screws, washers, the base and the fabric shade. I'm ready to answer any questions you have about the assembly or features of these lamps.
  • What is the function of the swing turn-knob (L)?
    What is the voltage and wattage of the lamp?
Installation Instruction
Item No: 9122-TL & 9123-TL
1. Carefully unpack and take out the parts as picture shown.
2. Place the screw (B) through lock washer (C), iron washer (D), marble base (E), iron sheet (F) into the steel
pipe (G), then tighten the screw (B) with the wrench (A).
3. Place the wheel (H) through the steel pipe, then place the screw (J) through the holes of the steel pipe into
the wheel (H) and tighten with screwdriver (K).
4. Screw the turn-knob (L) through steel pipe (G) into the wheel (H).
5. Place the fabric shade (N) onto the socket (M), then secure with the socket ring (O).
Note: Swing turn-knob (L) is for adjusting arm (I) up and down only, not side to side.
Note: 120V/100W
/