ICIDU NI-707547 User manual

Brand: ICIDU

Model: NI-707547

Type: User manual

ICIDU NI-707547:

Extend your Wi-Fi range and eliminate dead zones with the ICIDU NI-707547 Wireless 300N Repeater. This compact device can be configured as a wireless repeater, wireless client, or access point, making it a versatile solution for your home or office network. With speeds up to 300Mbps, you can enjoy smooth streaming, gaming, and web browsing in every corner of your property.

Features:

300Mbps Wi-Fi: Experience blazing-fast speeds for lag-free streaming, gaming, and downloads.
Repeater, Client, and Access Point Modes: Extend your existing Wi-Fi network, connect wired devices wirelessly, or create a new Wi-Fi hotspot.

ICIDU NI-707547:

Features:

300Mbps Wi-Fi: Experience blazing-fast speeds for lag-free streaming, gaming, and downloads.
Repeater, Client, and Access Point Modes: Extend your existing Wi-Fi network, connect wired devices wirelessly, or create a new Wi-Fi hotspot.

M A N U A L

N I - 7 0 7 5 4 7

N e t w o r k r e p e A t e r

w I r e L e s s 3 0 0 N

3 0 0 M b p s

First of all, let us thank you for purchasing the 300N wireless repeater. This wireless repeater

provides a simple way of extending the range of your existing wireless network. It’s ideal if your

wireless signal is limited by obstacles such as concrete walls. This repeater can also be used as

a Wireless Access Point or a Wireless Client Adapter, simply by adjusting the selection button.

- C o N t e N t s o F t H e p A C k A G e

- t e C H N I C A L s p e C I F I C At I o N s

- A p p L I C At I o N s

- H A r d w A r e I N s t A L L At I o N

- M A k I N G A C o N N e C t I o N

- w p s ( w I - F I p r o t e C t e d s e t U p )

- L e d I N d I C A t I o N s

- r e s e t t I N G t H e d e v I C e

- G U A r A N t e e

e N G L I s H

N e t w o r k r e p e A t e r

w I r e L e s s 3 0 0 N

3 0 0 M b p s

C o N t e N t s o F t H e p A C k A G e

Check that all of the required components are present before starting the installation process.

The package should contain:

- 300N wireless repeater

- Manual

- CD with manuals in 13 languages and complete English language manual

Purchase tip: LAN cable

t e C H N I C A L s p e C I F I C A t I o N s

- Conﬁgurable as a wireless repeater, wireless client or access point

- Low power consumption, 1.8W

- 802.11n wireless protocol

- Compatible with IEEE802.11g and IEE802.11b

- Supports WEP, WPA/WPA2, TKIP/AES encryption

- IEEE802.1x authentication

- 300 Mbps data transfer rate

- 2x Internal antennae (2T2R)

- Web-based conﬁguration

- WPS

- On/off switch

- Operating system independent

A p p L I C A t I o N s

WIRELESS REPEATER

Extends the range of an existing wireless network. In repeater mode, the device will make

contact with an existing network and pass on the information from client to router. Share ﬁles

and internet connections at locations beyond the range of the router.

WIRELESS ACCESS POINT

Connect the repeater directly to a modem or router in order to add wireless network

functionality.

WIRELESS CLIENT

Connect network devices such as a PC or the newer generation of DVD players and TVs to an

existing network and use the additional internet functions.

H A r d w A r e I N s tA L L A t I o N

Switch the device to the desired functionality:

AP – operates as a Wireless Access Point

Repeater – operates as a wireless repeater

Client - operates as a wireless network client

Connect the wireless repeater to the mains and switch it on using the on/off button.

M A k I N G A C o N N e C t I o N

WEB INTERFACE

We recommend logging in via the web interface in order to make use of the extended

conﬁgurations for the repeater. Connect the repeater to a PC or notebook using a LAN cable.

Make sure the computer is set to receive IP. (Automatically receive an IP address from a DHCP

server)

Open a web browser and type in ‘http://repeater’ or ‘192.168.2.254’ in the address box.

The repeater will ask for a user name and password.

User: admin

Password: 1234

When you click on “OK”, you will be taken to the quick setup of the wireless repeater.

Follow the instructions and settings on the screen. The quick setup may vary, depending on the

setting you selected for the wireless repeater.

When the repeater has been set in the desired mode, leave the device on for 5 minutes. The

repeater can then be switched off and plugged into the mains at a different location. The

settings will then remain the same.

For more comprehensive information, please read the complete English manual on the CD.

w p s ( w I - F I p r o t e C t e d s e t U p )

Use the WPS button to connect to a wireless broadband router or access point.

1) Press and hold the WPS button on the repeater for 2 seconds.

2) The ‘WPS’ LED starts to ﬂash.

3) Press the WPS button on the router or access point to which you want to connect, within 2

minutes.

When the repeater has been set in the desired mode, leave the device on for 5 minutes.

The repeater can then be switched off and plugged into the mains at a different location.

The settings will then remain the same.

L e d I N d I C A t I o N s

Signal

WLAN

Power

WPS

LAN

LED Colour LED status Description

Amber Constant Receiving a good signal ( strength 100%~50%)

Flashing Normal signal

Flashing slowly (50%~25%)

Poor signal

Flashing rapidly (<25%)

Off Out of range, not connected or LED off mode.

Green Flashing Connecting to a wireless router or access point,

wireless function is active. (sending or receiving data)

Off Wireless network is disabled or LED off mode.

Green Constant Equipment is switched on

In LED mode, only the Power LED will be on

Flashing Ready for “reset to factory settings”

Off Equipment is switched off

Green Constant When the WPS connection is successful, leave the

appliance on for 5 minutes.

Flashing WPS in use or waiting for another WPS appliance.

Off No WPS in use or LED off mode.

Green Constant LAN port is connected.

Flashing LAN port is active (data being exchanged).

Off LAN port not connected or LED off mode.

r e s e t t I N G t H e d e v I C e

The wireless repeater can easily be reset to the factory settings.

To do this, press and hold the WPS button for 10 seconds. This will then restore the factory

settings.

C e M A r k w A r N I N G

This is a class B product. In a domestic environment, this product may cause radio interference,

in which case the user may be required to take adequate measures.

NATIONAL RESTRICTIONS

This device is intended for home and ofﬁce use in all EU countries (and other countries following

the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:

COUNTRY RESTRICTION REASON/REMARK

Bulgaria None General authorization required for

outdoor use and public service

France Outdoor use limited to 10 Military Radiolocation use.

mW e.i.r.p. within the band Refarming of the 2.4 GHz band has

2454-2483.5 MHz been ongoing in recent years to

allow current relaxed regulation.

Full implementation planned 2012

Italy None If used outside of own premises,

general authorization is required

Luxembourg None General authorization required for

network and service supply(not for

spectrum)

Norway Implemented This subsection does not apply for

the geographical area within a

radius of 20 km from the centre of

Ny-Ålesund

Russian Federation None Only for indoor applications

Please don’t use the product outdoors in France

S’il vous plaît ne pas utiliser le produit à l’extérieur en France.

F C C s tAt e M e N t

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including

interference that may cause undesired operation.

Any changes or modiﬁcations not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

F C C r F r A d I At I o N e x p o s U r e s tAt e M e N t:

This device has been tested for compliance with FCC RF Exposure (SAR) limits in the typical

laptop computer conﬁguration and this device can be used in desktop or laptop computers.

This device cannot be used with handheld PDAs (personal digital assistants). This device and its

antenna must not be co-located or operated in conjunction with any other antenna or transmitter.

SAR measurements are based on a 5mm spacing from the body and that compliance is achieved

at that distance.

G U A r A N t e e

There is a 10 year guarantee period for all items sold under the ICIDU name, unless otherwise

stated. We provide no support or guarantee for bundled software and rechargeable batteries.

The guarantee can only be honoured via the dealer from whom the item in question was

purchased.

Speciﬁcations may be altered without notice. All ICIDU products meet current European

standards and legislation on safety and the environment. Visit our website, www.icidu.com, for

further details.

ICIDU is a registered brand name. All other brand names and associated rights are and remain the property

of their lawful owners.

All rights are expressly reserved

ICIDU NI-707547 User manual

Brand: ICIDU

Model: NI-707547

Type: User manual

ICIDU NI-707547:

Features:

300Mbps Wi-Fi: Experience blazing-fast speeds for lag-free streaming, gaming, and downloads.
Repeater, Client, and Access Point Modes: Extend your existing Wi-Fi network, connect wired devices wirelessly, or create a new Wi-Fi hotspot.

Download PDF

report

ICIDU NI-707547 User manual

ICIDU NI-707547 User manual

Related papers

Other documents