Aqua EZ UV189 Assembly Instructions

Brand
Aqua EZ
Model
UV189
Type
Assembly Instructions

Aqua EZ UV189 is a versatile device that can be used for various cleaning tasks around your pool. With its powerful suction, it effectively removes dirt and debris from the pool floor, leaving your pool sparkling clean. The fine mesh bag collects the debris, making it easy to dispose of. The adjustable pole allows you to customize the height of the vacuum to suit your needs, ensuring comfortable cleaning. Additionally, the quick connect fitting makes it easy to connect the vacuum to your garden hose, providing a convenient and efficient cleaning experience.

Aqua EZ UV189 is a versatile device that can be used for various cleaning tasks around your pool. With its powerful suction, it effectively removes dirt and debris from the pool floor, leaving your pool sparkling clean. The fine mesh bag collects the debris, making it easy to dispose of. The adjustable pole allows you to customize the height of the vacuum to suit your needs, ensuring comfortable cleaning. Additionally, the quick connect fitting makes it easy to connect the vacuum to your garden hose, providing a convenient and efficient cleaning experience.

7.
5.
10.
8.
9.
6.
1.
2.
3.
4.
JET VAC
ASSEMBLY INSTRUCTIONS
Instrucciones de ensamblaje
6100 Wheaton Dr. Atlanta, Georgia 30336
Tel (404) 696-2707 Fax (404) 460-1250 Toll Free (877) 852-4264
http://www.aquaez.com
A.
B.
C.
D.
E.
Firmly insert vacuum head #8 into the main
body #10. Be sure that connecting handle #6 is
positioned directly underneath the quick connector
#3. Then place handle pin #9 in its proper hole,
where connecting handle and vacuum head meet.
Firmemente inserte el cabezal de la aspiradora #8
en la unidad principal #10. Asegúrese de que el
mango de conexión #6 esté posicionado directa-
mente debajo del conector rápido #3.
Luego coloque el pasador del mango #9 en el
agujero apropiado, donde el mango de conexión
se une con el cabezal.
Place fine mesh bag #7 over the main body rim.
Tighten bag by using the cord-tightening pin #5.
Coloque la bolsa de malla fina #7 por encima del
aro de la unidad principal. Ajuste la la bolsa de malla
fina con el pasador con cordón de ajuste #5.
Screw pole sections #1 together to preferred height.
Then screw pole into the connecting
handle #6.
Atornille las secciones del poste a la altura deseado.
Luego atornille el poste al mango de conexión.
Attach female quick connect #4 to garden hose #2.
Be sure that a washer is between the threads and
garden hose to prevent leaking. (Garden Hose Sold
Separately)
Fije el conector rápido hembra #4 a la manguera #2. Asegúrese que la arande-
la se encuentre entre la rosca del conector y la manguera para jardín para
prevenir filtraciones. (La manguera para jardín se vende por separado)
Firmly press to connect the male quick connect fitting #4 into the female quick
connect fitting #3.
Inserte firmemente el conector rápido macho #4 en el conector hembra #3.
JET VAC JET VAC
OPERATING INSTRUCTIONS
Instrucciones de uso
ADDING A TELESCOPIC POLE
Agregue un poste telescópico
A.
B.
C.
D.
E.
F.
Note: Telescopic pole and replacement vacuum handle
sold separately.
Nota: El poste telescópico y el mango de reemplazo para
aspiradora se venden por separado.
Loop garden hose around vac pole twice to keep hose and pole together during
vacuuming. This will prevent hose from stirring up dirt from floor of pool.
Enlaze la manguera para jardín alrededor del poste dos veces para
mantener el poste y la manguera unidos mientras se aspira. Esto previene que la
manguera levante los desperdicios que se encuentran en el fondo de la piscina.
Connect garden hose using quick connect fitting into body of Jet Vac.
Conecte la manguera para jardín a la aspiradora utilizando el conector rápido.
Lower Jet Vac into pool.
Sumerja la aspiradora en la piscina.
Turn garden hose on full pressure.
Abra la llave de agua a a máxima presión.
Vacuum pool allowing debris to collect into fine mesh bag.
Aspire el fondo de la piscina y junte los desperdicios en la bolsa de malla fina.
When vacuuming is complete, turn garden hose off. Remove fine mesh bag and
empty contents into trash.
Cuando haya terminado de aspirar cierre la llave del agua por completo.
Remueva la bolsa de malla fina y vacíe el contenido en la basura.
Replace connecting handle with a replacement
vacuum handle. Slide telescopic pole over
connecting handle and snap into place.
Reemplace el mango de conexión con un mango de
reemplazo para aspiradoras. Deslice el poste telescópico
sobre el mango y encájelo en su sitio.
  • Page 1 1
  • Page 2 2

Aqua EZ UV189 Assembly Instructions

Brand
Aqua EZ
Model
UV189
Type
Assembly Instructions

Aqua EZ UV189 is a versatile device that can be used for various cleaning tasks around your pool. With its powerful suction, it effectively removes dirt and debris from the pool floor, leaving your pool sparkling clean. The fine mesh bag collects the debris, making it easy to dispose of. The adjustable pole allows you to customize the height of the vacuum to suit your needs, ensuring comfortable cleaning. Additionally, the quick connect fitting makes it easy to connect the vacuum to your garden hose, providing a convenient and efficient cleaning experience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents