Groupe Brandt DHB7915XC Owner's manual
- Category
- Cooker hoods
- Type
- Owner's manual
Groupe Brandt DHB7915XC Groupe Brandt DHB7915XC is a decorative hood designed for efficient and convenient kitchen ventilation. Here's a brief overview of its capabilities:
- Multiple fan speeds: The hood features four fan speed levels, allowing you to adjust the extraction power to suit your cooking needs.
- Easy-to-use controls: The push-button control panel provides intuitive operation, with dedicated buttons for each function.
- Delayed shut-off timer: The 10-minute timer allows you to set the hood to automatically turn off after a specified time, ensuring continued ventilation after cooking.
Groupe Brandt DHB7915XC Groupe Brandt DHB7915XC is a decorative hood designed for efficient and convenient kitchen ventilation. Here's a brief overview of its capabilities:
- Multiple fan speeds: The hood features four fan speed levels, allowing you to adjust the extraction power to suit your cooking needs.
- Easy-to-use controls: The push-button control panel provides intuitive operation, with dedicated buttons for each function.
- Delayed shut-off timer: The 10-minute timer allows you to set the hood to automatically turn off after a specified time, ensuring continued ventilation after cooking.
EN GUIDE TO INSTALLATION
DHB7915XC
DECORATIVE HOOD
EN
DEAR CUSTOMER
To discover a De Dietrich product means to feel unique emotions.
The attraction begins as one catches eye of it.
The quality of the design distinguishes itself for a timeless aesthetics
and rened nish, which - in perfect harmony
with one another - make every product elegant and sophisticated.
An irresistible impulse to touch comes then right away.
De Dietrich’s design capitalizes on solid and precious materials;
authenticity is preferred.
By combining the most advanced technology with noble materials,
De Dietrich secures the realization of well-made products serving
the culinary art, a passion shared by all cooking lovers.
We wish you a lot of satisfaction while using this new appliance.
We are grateful for your trust.
3
3
4
5
Fig. 2
2
Fig. 2
Fig. 2
Fig. 2
1
6
4
7
8 9
6/A
TABLE OF CONTENTS
WARNINGS
IDENTIFICATION
1 / USAGE
2 / INSTALLATION
• Fixing the ornamental chimney _______________________
• Filtering version ___________________________________
• Working _________________________________________
3 / MAINTENANCE
• Replace the led bar ________________________________
6
7
7
8
8
8
9
5
EN
Two people are required to install this appliance.
The appliance is not intended for use by young children and inexpert or inrm
people without supervision.
The air collected shall not be conveyed into a ducting system which is being
used for discharging exhaust fumes from appliances fed by fuels other than
electrical energy (centralized heating systems, heaters, water-heaters, etc).
Discharge of collected air shall be performed according to the requirements
specied by the competent authorities.
Adequately ventilate the room when a cooker hood and other appliances, powered
by energy other than electricity (gas, oil, coal stoves) are used simultaneously, so
that the hood does not suck any combustion fumes. The cooker hood, when eva-
cuating the sucked air, could generate a negative pressure in the room.
The negative pressure shall not exceed the limit of 0.04 mbar, in order to avoid the
suck of exhausts deriving from the heat source. Therefore the room should be pro-
vided with air intakes to allow a constant ow of fresh air.
When performing the electrical connection on the appliance, please make sure that
the current tap/socket is provided with ground connection and that voltage values
correspond to those specied on the rating label found inside the appliance.
Please disconnect the appliance from power supply, before carrying out any clea-
ning or maintenance operation.
If the appliance is not equipped with a non-separable exible cable and plug, or with
another device ensuring omnipolar disconnection from the mains, with an opening
gap between the contacts of at least 3 mm, then such disconnecting devices must
be provided in the xed installation.
If the appliance is equipped with a power cord and a plug, it shall be placed in such
a way that the plug can be reached easily.
The use of materials which can burst into ames (ambé) should be avoided
in close proximity of the appliance.
When frying, please pay particular attention to re risk due to oil and grease.
Being highly inammable, fried oil is especially dangerous. Do not use unco-
vered electric grills. In order to avoid any possible re risk, all instructions for
grease lter cleaning and removal of any grease deposits should be strictly
followed.
6
WARNINGS
• 0 IDENTIFICATION
• 1 USAGE
Before installing the appliance, make
sure that none of the parts is damaged
in any way.
In case of damaged parts, contact your
retai ler and do not proceed with instal-
lation.
Read all of the following instructions with
care before installing the appliance.
- Use an air outlet pipe of the shortest
pos sible length.
- Limit the number of pipe bends.
- Use a material approved by standards
and regulations.
- Avoid any sudden changes in pipe sec-
tion (recommended constant diameter:
200 mm or equal surface area).
7
•
2
INSTALLATION
Before installing the appliance, in order
not to damage the appliance itself, the
metal grea se lter should be removed.
Such lter can be removed by pushing
the special lter handle toward the back
side of the cooker hood and turning it
downwards so to unfasten it from its slot
(Fig. 1).
By using the special drilling jig (Fig. 2X),
perforate the wall according to the pat-
tern indicated by the jig itself, and pay
attention in order not to damage water
pipes and electric wires. Perforation
should be performed with a Ø 8 mm
wall-drill. Then insert the dowels into the
proper plastic reinforcements (Fig. 2A).
The hood-bearing stirrup (Fig. 2S) can
be applied by using the screws provided
with the equi pment (Fig. 2B). Now hook
the cooker hood onto its bearing (Fig. 3)
and then adjust hori zontally and vertical-
ly the position of the ap pliance by acting
on the special metric screws (Fig. 4V,T).
Fixing the ornamental chimney
Before xing the chimney, place the
electric feeding equipment into the orna-
mental pipe and provide it with a hole for
the air outlet if the appliance is used in its
sucking version.
Fix the supporting bracket of the chim-
ney to the wall or to to ceiling (g. 5), in-
stall both chimneys in their suitable place
above the hood, then lift the upper chim-
ney (the inter nal one) until it reaches the
supporting brac ket, previously installed.
Fix the upper chimney both in the right
and in the left side through the two
screws supplied.
Warning: Failure to install the screws or
xing device in accordance with these
instructions may result in electrical ha-
zards.
FILTERING VERSION
In case the appliance is used in the l-
tering mode, activated charcoal lters
need to be installed, as shown in Fig. 6.
In the ltering version the air deviator is
xed through the screws supplied (Fig.
6A).
WORKING
A: Light switch on/off
B: Motor switch on/off (1st rate level)
C: 2nd rate level switch
D: 3rd rate level switch
E: 4th rate level switch
F: 10-minute timer.
8
WARNINGS
Any adjustments or modications which
have not been expressly approved by
the holder of the legal conformity cer-
ticate may invalidate the user’s rights
relating to the use of the appliance.
9
An accurate maintenance guarantees
good functioning and long-lasting per-
formance.
Particular care is due to the grease l-
ter pa nel. It can be removed by pushing
its special handle toward the back-side
of the cooker hood and turning the lter
downwards so to unfasten it from its slot
(Fig. 1).
To insert the lter just perform the oppo-
site operation.
After 30 hours working the push button
con trol panel will signal the saturation of
the grease lter by lighting all the but-
tons.
The grease lter needs cleaning by re-
gular hand-washing or in dishwashers
every two months at least or depending
on its use.
How to remove the oil collector.
First, remove the grease lter, Then pla-
ce your hand under the oil collector and
unfasten the handles (Pic. 7 - 8) Even-
tually remove the oil collector, paying
attention to the leaking oil.
To clean the appliance itself tepid water
and neutral detergent are recommen-
ded, whi le abrasive products should be
avoided. For steel appliances speciali-
zed detergents are recommended (ple-
ase follow the instructions indicated on
the product itself to obtain the desired
results).
If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent or a similarly qualied
person in order to avoid a hazard.
There is a re risk if cleaning is not car-
ried out in accordance with the in-
structions.
Replace the led bar
Before replacing the led bar switch off
the appliance then by using appropria-
te tools remove the led bar from its slot
(Pic. 9).
Take out the led bar from its connector
and replace it with one of similar cha-
racteristics.
To nd the correct led bar please check
on the replacement part list.
• 3 MAINTENANCE
10
90000105108 - GM 04/18
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Groupe Brandt DHB7915XC Owner's manual
- Category
- Cooker hoods
- Type
- Owner's manual
Groupe Brandt DHB7915XC Groupe Brandt DHB7915XC is a decorative hood designed for efficient and convenient kitchen ventilation. Here's a brief overview of its capabilities:
- Multiple fan speeds: The hood features four fan speed levels, allowing you to adjust the extraction power to suit your cooking needs.
- Easy-to-use controls: The push-button control panel provides intuitive operation, with dedicated buttons for each function.
- Delayed shut-off timer: The 10-minute timer allows you to set the hood to automatically turn off after a specified time, ensuring continued ventilation after cooking.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
