Yamaha CRX-E400 Owner's manual

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia V922180

CRX-E400

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Receiver/CD Player

Récepteur/Lecteur CD

GB

RX-E400

CDX-E400

CRX-E400

0101CRXE400(M)./H1-H4.E 02.6.13, 7:30 PM1

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place away from direct sunlight, heat sources, vibration,

dust, moisture or cold. In a cabinet, allow about 10 cm

(4 in.) of free space all around RX-E400 for adequate

ventilation.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes

from cold to hot, nor locate this unit in an environment

with high humidity (i.e., a room with a humidifier) to

prevent condensation inside this unit, which may cause

an electrical shock, fire, damage to this unit, and/or

personal injury.

5 Avoid installing this unit in a location where foreign

objects may fall onto this unit or where this unit may be

exposed to liquid dripping or splashing. On the top of

this unit, do not place:

• Other components, as they may cause damage and/or

discoloration on the surface of this unit.

• Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

• Containers with liquid in them, as they may fall, spilling

the liquid and causing an electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the

temperature inside this unit rises, it may cause fire,

damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use excessive force on switches, knobs and/or

cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this

unit with a higher voltage than specified is dangerous

and may cause fire, damage to this unit, and/or personal

injury. YAMAHA will not be held responsible for any

damage resulting from use of this unit with a voltage

other than as specified.

13 To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any service

is needed. The cabinet should never be opened for any

reason.

15 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug from

the wall outlet.

16 Be sure to read the “Troubleshooting” section on

common operating errors before concluding that this

unit is faulty.

17 Before moving this unit, press STANDBY/ON to set the

unit in standby mode, then disconnect the AC power

plug from the wall outlet.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT

18 VOLTAGE SELECTOR (General model only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage BEFORE

plugging into the AC main supply. Voltages are 110/120/

220/240 V AC, 50/60 Hz.

To reduce the risk of fire or electric shock, do not

expose this appliance to rain or moisture.

The unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off. This state is called the standby

mode. In this state, this unit is designed to consume a

very small quantity of power.

CAUTION FOR CARRYING THE UNIT

Before carrying the unit, first remove the disc from

the unit, press STANDBY/ON to turn the unit off,

then disconnect the AC power plug from the wall

outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

The wires in the mains lead are coloured in accordance

with the following code:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows: The wire which is coloured BLUE

must be connected to the terminal which is marked

with the letter N or coloured BLACK. The wire which

is coloured BROWN must be connected to the terminal

which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described above.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous

if engaged in a live socket outlet.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

Laser component in this product is capable of

emitting radiation exceeding the limit for Class 1.

RX-E400 (U.S.A., Canada and General models)

The nameplate is located on the bottom of the unit.

0102CRXE400(M).Cau.E 02.6.13, 7:16 PM2

1

English

FEATURES

<RX-E400>

• Minimum RMS output power per

channel 40 W + 40 W

(6Ω, 20 Hz to 20 kHz, 0.1% THD)

• Full operation system remote control

• 40-station FM/AM preset tuning

• Multi-function RDS reception

• SUBWOOFER output terminal

<CDX-E400>

• S-bit DAC and 8fs digital filter

• Optical digital output

• Random, repeat, and program play

• CD TEXT display

• Copy time control

• CD-RW compatible

The receiver (RX-E400) and CD player (CDX-E400) are the main units of the YAMAHA Piano Craft Series.

You can upgrade the system by adding the cassette deck (KX-E300) and MD recorder (MDX-E300)*.

* MD recorder (MDX-E300) may not be available for some areas.

CONTENTS

SUPPLIED ACCESSORIES ....................... 2

CD PREVENTIVE CARE .......................... 2

GETTING STARTED

Remote control .................................................... 3

Connecting the speakers and antennas ................ 4

Connecting the system......................................... 5

Setting the clock .................................................. 6

Adjusting the brightness of the display ............... 6

<RX-E400>

NAMES OF BUTTONS AND CONTROLS

Front panel........................................................... 7

Display................................................................. 7

Remote control .................................................... 8

BASIC OPERATIONS

Listening to a source............................................ 9

TUNING

Listening to the radio......................................... 10

Presetting stations .............................................. 11

RECEIVING RDS STATIONS

Receiving RDS data .......................................... 12

PTY SEEK mode............................................... 13

Optional settings for RDS functions ................. 14

USING THE BUILT-IN TIMER

Before using the timer ....................................... 15

Timer play and recording .................................. 15

Sleep timer......................................................... 16

<CDX-E400>

NAMES OF BUTTONS AND CONTROLS

Front panel......................................................... 17

Display............................................................... 17

Remote control .................................................. 18

CD OPERATIONS

Playing a disc..................................................... 19

Selecting the time display and CD TEXT ......... 20

Random-sequence play...................................... 20

Repeat play ........................................................ 21

Program play ..................................................... 21

SYSTEM CONTROL

Controlling other components ........................... 23

Before recording ................................................ 24

Dubbing setting ................................................. 24

Copy time control .............................................. 25

ADDITIONAL INFORMATION

Troubleshooting ................................................. 26

Specifications .................................................... 28

0103CRXE400(M).01-02.E 02.6.13, 7:16 PM1

2

SUPPLIED ACCESSORIES

• Remote control

• AM loop antenna

• Indoor FM antenna

• Batteries (AA, R6, UM-3)

<CDX-E400>

• System control cable

• Audio pin cable

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAUSE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

After unpacking, check that the following parts are contained.

<RX-E400>

CD PREVENTIVE CARE

No!

• Compact discs are not affected by small particles of

dust or fingerprints on their playing surface, but even so

they should be kept clean. Wipe by using a clean, dry

cloth. Do not wipe with a circular motion; wipe straight

outward from the center.

• Do not try to clean the disc’s surface by using any type

of disc cleaner, record spray, antistatic spray or liquid,

or any other chemical-based liquid, because such

substances might irreparably damage the disc’s surface.

• Do not expose discs to direct sunlight, high temperature

or high humidity for a long period of time, because

these might warp or otherwise damage the disc.

• This compact disc player is designed for use with

following types of disc only. Never attempt to load any

other type of disc into the unit. The unit will also play

8-cm (3-inch) compact discs.

• Be sure to use only CD-R and CD-RW discs made by

reliable manufacturers.

• Some discs cannot be played depending on the disc

characteristics or recording conditions (copyright-

protected in a particular way, etc.).

• Compact discs are not subjected to wear during play,

but damage to the disc surface when the disc is being

handled can adversely affect the disc’s play.

• Do not use cleaning discs or warped discs. All of these

could damage the unit.

To prevent a malfunction of this unit

• Do not use any non standard shaped CD (heart, etc.)

available on the market, because it may damage the

unit.

• Do not use a CD with tape, seals, or paste on it, because

damage to the unit may result.

(Playback only)

0103CRXE400(M).01-02.E 02.6.13, 7:16 PM2

3

English

Remote control

This remote control controls a whole system: not only

RX-E400 but also CDX-E400. Moreover, a cassette deck

(KX-E300) and MD recorder (MDX-E300) that level up

your system can be operated by it. Operating buttons for

each unit are explained on the pages below:

Receiver, RX-E400: p.8

CD player, CDX-E400: p.18

Cassette deck, KX-E300: p.23

MD recorder, MDX-E300: p.23

Battery installation

1 Remove the battery compartment cover.

2 Insert batteries into the battery compartment.

3 Replace the battery compartment cover.

Battery replacement

If you find that the remote control must be used closer to

the main unit than usual, the batteries are weak. Replace

batteries with new ones.

Notes

• Use only AA, R6, UM-3 batteries for replacement.

• Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

• Remove the batteries if the remote control will not be used for

an extended period of time.

• If batteries leak, dispose of them immediately. Avoid touching

the leaked material or letting it come in contact with clothing,

etc. Clean the battery compartment thoroughly before

installing new batteries.

Remote control operation range

Notes

• There should be no large obstacles between the remote control

and the main unit.

• If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp, etc.),

it might cause the remote control not to work correctly. In this

case, reposition the main unit to avoid direct lighting.

Removing the protection sheet

The remote control is shipped with a protection sheet to

prevent the surface from being scratched during

transportation.

When removing the sheet, first put adhesive tape on an

edge of the remote control so that the tape sticks to the

sheet. Then peel the sheet off with the tape.

Note

• Do not scratch the remote control surface when peeling the

sheet off.

GETTING STARTED

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+–+–

30°

2

1

3

Remote control

sensor

Within approximately

6 m (20 feet)

P

O

W

E

R

1

2

3

4

7

8

9

5

6

P

O

W

E

R

1

2

3

4

7

8

9

5

6

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM3

4

Connecting the speakers and antennas

Never plug the AC power cord to the wall outlet until all connections are

completed.

Follow the steps as shown below to connect the system using the supplied cords and accessories. Be sure all connections are

made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.

1 Connect the Speakers.

1 Unscrew the knob.

2 Remove approx. 10 mm (4”) of insulation from

each of the speaker wires and insert the bare wire

into the terminal.

3 Tighten the knob to secure the wire.

2 Connect the AM Antenna.

Set up the AM loop antenna, then connect it.

3 Connect the FM Antenna.

4 Connect the AC power cord to a wall outlet.

Notes

• Use external FM/AM antennas if you need better reception.

Consult your dealer.

• The AM loop antenna should be placed apart from the main

unit. The antenna may be hung on a wall.

To connect the subwoofer (optional)

You can reinforce the bass frequencies by adding a

subwoofer (optional).

Connect the SUBWOOFER OUT terminal of the unit to

the INPUT terminal of the subwoofer.

1

3

FM antenna

2 AM loop antenna

Right speaker

Left speaker

GETTING STARTED

Red: positive(+)

Black: negative(–)

GND

AM

ANT

FM ANT

75 Ω UNBAL

1

2

3

FM ANT

75Ω UNBAL.

IN

OUT

6Ω MIN./SPEAKER

SPEAKERS

SUBWOOFER

OUT

SYSTEM

CONNECTOR

GND

AM

ANT

TAPE

CD

AUX

MD

R

L

R L

+

–

A

B

E

C

D

4 To wall outlet

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM4

5

English

Connecting the system

Connecting RX-E400 and CDX-E400

1 Connect ‰ to ‰ using the Audio pin cable.

Insert the plugs into the jacks of the same color.

2 Connect RX-E400 and CDX-E400 with the system control cable.

The other SYSTEM CONNECTOR of CDX-E400 is for connecting MDX-E300 or KX-E300.

3 Connect the AC power plug of CDX-E400 to AC OUTLET of RX-E400.

This connection allows you to control the power of the system through one-touch operation. It also reduces the standby

power consumption of CDX-E400.

Adding KX-E300 and MDX-E300 to the above system

(For details, refer to the owner's manual supplied with the respective component.)

1 Connect Å and ı of RX-E400 to Å and ı of KX-E300.

2 Connect Ç and Î of RX-E400 to Ç and Î of MDX-E300.

3 Connect an external component to the AUX terminal of RX-E400.

4 Connect DIGITAL OPTICAL OUT of CDX-E400 to DIGITAL OPTICAL IN of MDX-E300.

Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL

IN jack before making digital connections. Be sure to replace the terminal’s cover when the terminal on the rear panel

is not being used, in order to protect from dust.

Caution

• Never turn RX-E400 on until all connections between components have been completed.

• Never connect or disconnect the system control cable and/or power cord while the system components are turned on.

GETTING STARTED

To wall outlet

To RX-E400

Audio pin cable

<RX-E400>

<CDX-E400>

FM ANT

75Ω UNBAL.

IN

OUT

6Ω MIN./SPEAKER

SPEAKERS

SUBWOOFER

OUT

SYSTEM

CONNECTOR

GND

AM

ANT

TAPE

CD

AUX

MD

R

L

R L

+

–

A

B

E

C

D

DIGITAL

OPTICAL

ANALOG

OUT

SYSTEM

CONNECTOR

E

R

L

OUT

1

System control cable

2

3

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM5

6

GETTING STARTED

Setting the clock

You must set the clock before you use the timer functions.

The clock is based on a 24-hour system.

1 Turn on the power by pressing STANDBY/ON on

the front panel, or POWER on the remote control.

2 While the power is on, press DISPLAY to display

the time.

3 While holding TIME ADJ, press HOUR to set the

hour.

• If you want to move the time in the reverse

direction, press HOUR while holding TIME ADJ

and PRESET/BAND.

4 While holding TIME ADJ, press MIN to set the

minutes.

• If you want to move the time in the reverse

direction, press MIN while holding TIME ADJ

and PRESET/BAND.

To display the clock

Press DISPLAY.

The current time appears for about 8 seconds, then the

normal display returns. Some buttons and controls may

not work while the current time is displayed.

Note

• In the event of a power failure or when the AC power cord is

disconnected for more than five minutes, you must reset the

clock.

Adjusting the brightness

of the display

You can adjust the brightness of the display. If you have

connected the CD player (CDX-E400), cassette deck

(KX-E300), and/or MD recorder (MDX-E300) to this

unit, the brightness of the displays is automatically

adjusted to that of this unit.

Press and hold DISPLAY for about two seconds so that

“Dimmer ±0” appears on the display. While holding

DISPLAY, turn INPUT clockwise to increase or

counterclockwise to decrease brightness.

Control Range: ±0 to –6 (Preset value: ±0)

HOUR

DISPLAY

PRESET/BANDTIME ADJ

MIN

INPUT

DISPLAY

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+– +–

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+– +–

STANDBY/ON

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM6

7

English

Display

7 MEMORY indicator (P.11)

8 RDS indicator (P.12)

9 RDS mode indicators (P.12)

0 PTY HOLD indicator (P.13)

q TIMER indicator (P.15)

w SLEEP indicator (P.16)

1 STANDBY/ON (P.9)

2 TIMER indicator (P.15)

3 DISPLAY (P.15)

4 TIME ADJ/MEMORY (P.6/P.11)

5 AUTO/MAN’L/TIMER (P.10/P.15)

6 PRESET/BAND (P.10)

7 Display (P.7)

8 PRESET/TUNING / (P.10)

HOUR/MIN (P.6/P.15)

1 Multi-information display

2 EDIT indicator

3 PRESET indicator (P.11)

4 STEREO indicator (P.10)

5 TUNED indicator (P.10)

6 AUTO indicator (P.10)

RX-E400 NAMES OF BUTTONS AND CONTROLS

9 VOLUME (P.9)

0 PHONES (P.9)

q Remote control sensor (P.3)

w BASS (P.9)

e TREBLE (P.9)

r BALANCE (P.9)

t INPUT (P.9)

Front panel

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+– +–

12 345678 9

0 q wer t

EDIT

TIMER

SLEEP

STEREO AUTO RDS PS RT CTPTY

MEMORY

TUNED PTY HOLD

PRESET

1345267890qw

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM7

8

Remote control

1 POWER (P.9)

2 Preset numbers (P.11)

3 FREQ/RDS (P.12)

4 PTY SEEK MODE (P.13/P.14)

5 PTY SEEK START (P.13/P.14)

6 A/B/C/D/E (P.11)

7 PRESET / (P.11)

8 TUNER (RX-E400) (P.11)

9 MD (MDX-E300) (P.23)

0 TAPE (KX-E300) (P.23)

q CD (CDX-E400) (P.19)

w AUX (The equipment connected to the AUX

terminal) (P.5)

e SLEEP (P.16)

r DISPLAY (P.15)

t VOLUME %/ﬁ (P.9)

Note

• 8~w are operation buttons and input selectors for each

component.

RX-E400 NAMES OF BUTTONS AND CONTROLS

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAUSE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

1

2

3

4

5

8

0

q

w

r

t

6

7

9

e

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM8

English

9

BASIC OPERATIONS

Listening to a source

1 Set the volume to “MIN” by turning VOLUME.

2 Turn on the power by pressing STANDBY/ON on

the front panel, or POWER on the remote control.

• Piano Craft series components that have correct

system connections made to RX-E400 can be

controlled to turn to the on or standby mode by

RX-E400. However, once the connected

components are turned to the standby mode with

their respective STANDBY/ON button, they

cannot be controlled by RX-E400 STANDBY/

ON button.

3 Select the desired input source by turning INPUT so

that the source appears on the display.

• When you operate the component connected to the

AUX terminal, turn INPUT to select AUX.

4 Play the source. (Refer to the owner’s manual

supplied with each selected component.)

5 Adjust the volume level by turning VOLUME on the

front panel or pressing VOLUME %/ﬁ on the remote

control.

6 If desired, adjust BASS, TREBLE, and BALANCE.

BASS: Turn this control clockwise to increase (or

counterclockwise to decrease) the low frequency

response.

TREBLE: Turn this control clockwise to increase (or

counterclockwise to decrease) the high frequency

response.

BALANCE: Adjust the balance of the output volume

from the left and right speakers to compensate for

sound imbalance caused by the speaker location or

listening room conditions.

When you use headphones

Connect the headphones to the PHONES jack. You can

listen to the sound to be output from the main speakers

through the headphones.

When you have finished using this

unit

Press STANDBY/ON on the front panel again or

POWER on the remote control to set this unit to the

standby mode.

Auto standby function

This unit will be put automatically into the standby mode

under the following conditions:

• A component connected with a system control cable is

selected as an input source.

• The component connected to this unit is in stop mode

and not operated for 30 minutes.

VOLUME

STANDBY/ON

INPUT

BALANCE

TREBLE

BASSPHONES

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+– +–

POWER

VOLUME %/ﬁ

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAUSE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

0105CRXE400(M).09-09.E 02.6.13, 7:16 PM9

10

TUNING

Automatic tuning

1 Select TUNER by turning INPUT so that the

frequency of a radio station appears in the display.

2 Press PRESET/BAND to select the reception band.

Do not select the preset tuning mode (in which

“PRESET” appears on the display).

3 Press AUTO/MAN’L so that “AUTO” appears in the

display.

4 Press PRESET/TUNING (For a higher

frequency) or

(For a lower frequency).

5 The unit starts searching for a station.

When the unit finds a station, the unit stops searching

and “TUNED” appears on the display.

6 If the located station is not the one you want, repeat

steps 4 and 5 until a station you want is tuned.

Notes

• If automatic tuning search does not find the desired station, try

manual tuning as described next.

• When an FM stereo broadcast with sufficient signal strength is

received, “STEREO” appears on the display and you can listen

to stereo sound.

Listening to the radio

You can find radio stations automatically and manually.

Manual tuning

1 Follow steps 1 and 2 described in “Automatic

tuning.”

2 Press AUTO/MAN’L so that “AUTO” disappears

from the display.

3 Press PRESET/TUNING (For a higher

frequency) or

(For a lower frequency) to select

your desired station.

• Each time you press PRESET/TUNING or ,

the frequency changes step by step.

STEREO AUTO

TUNED

PRESET/TUNING /

PRESET/BAND

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+– +–

INPUT

AUTO/MAN’L

0106CRXE400(M).10-11.E 02.6.13, 7:16 PM10

11

English

TUNING

English

To preset stations manually

1 Tune in a desired station.

(Refer to the previous page for the tuning procedure.)

2 Press MEMORY.

3 Within about 5 seconds, use PRESET/TUNING

/ to select a desired preset number. Continue

pressing PRESET/TUNING

/ to select the

group of the preset stations (A, B, C, D, and E).

4 Press MEMORY.

•“MEMORY”, “PRESET”, and preset number will

appear on the display.

5 Repeat steps 1 to 4 until all desired stations are

preset.

Notes

• A new setting can be preset in place of a previous one.

• The preset stations are retained for a week after you disconnect

the AC power cord or a power failure occurs.

Presetting stations

The unit can preset station frequencies selected by

Automatic tuning or Manual tuning. Up to 40 stations can

be stored. With this function, you can select any desired

station by pressing the corresponding preset station

number.

To preset stations automatically

1 Select TUNER as input source by turning INPUT.

2 Press MEMORY for about 2 seconds.

• The unit starts presetting stations, “AUTO” and

“MEMORY” will flash on the display.

Received stations are stored to A1, A2...A8 sequentially.

After 40 stations or all FM and AM stations are stored, the

display will show the preset station A1.

To recall a preset station

Press TUNER and select the desired number by pressing

PRESET/BAND and PRESET/TUNING

/ on the

front panel or PRESET

/ , A/B/C/D/E and 1–8 on

the remote control.

The arrow will appear for a second when

it is preset.

INPUTPRESET/BANDMEMORY

1–8

A/B/C/D/E

TUNER

PRESET /

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+– +–

PRESET/TUNING /

STEREO

TUNED

MEMORY

PRESET

STEREO

TUNED MEMORY

PRESET

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAUSE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

0106CRXE400(M).10-11.E 02.6.13, 7:16 PM11

12

Receiving RDS data

RDS (Radio Data System) is a data transmission system

by FM stations in many countries. Stations using this

system transmit an inaudible stream of data in addition to

the normal radio signal. RDS data contains various types

of information, such as PS (Program Service), PTY

(Program Type), RT (Radio Text), and CT (Clock Time).

1 Tune in the FM station. (Refer to page 10, or you can

simply press TUNER on the remote control.)

2 Press FREQ/RDS to choose the mode. Each time

you press FREQ/RDS, the type changes as follows:

FREQ/RDS

TUNER

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAUSE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

PS

The name of the RDS station being received is displayed.

• If the unit cannot find a station with PS data, the unit stops

searching and “NO PS” appears on the display.

PTY

The type of the program on the RDS station now being

received is displayed. You can make this unit search for a

station which is broadcasting a program of a desired

program type. (Refer to PTY program mode in the next

section for details.)

RT

Information about the program (such as the title of the

song, name of the singer, etc.) on the RDS station being

received is displayed by a maximum of 64 alphanumeric

characters, including the umlaut symbol. If other

characters are used in the RT data, they are displayed with

an under-bar.

• If the unit cannot find a station with RT data, the unit stops

searching and “NO RT” appears on the display.

CT

Current time is displayed.

• If the unit cannot find a station with CT data, the unit stops

searching and “NO CT” appears on the display.

Notes

• RDS may not work properly if the station you are tuned to is

not transmitting the RDS signal properly or if the signal

strength is weak.

• Some FM stations do not offer RDS service. Of those that do,

not all provide the same types of services. The types provided

by the received RDS station are dimmed on the display. Check

with your local radio stations for details on RDS services in

your area.

RDS PS

RDS PTY

RDS RT

RDS CT

RECEIVING RDS STATIONS

0107CRXE400(M).12-14.E 02.6.13, 7:16 PM12

13

Playing CDsGetting Started

English

PTY SEEK mode

You can locate a desired station by selecting a program

type. The unit searches all preset stations into the type of

programs currently being broadcast from the RDS

stations.

To locate a station

1 Tune in the FM station. (Refer to page 10, or you can

simply press TUNER on the remote control.)

2 Press PTY SEEK MODE once so that “PTY” and a

PTY program flashes on the display.

3 Within about 20 seconds, press PRESET /

repeatedly until the desired program type appears on

the display.

4 Within about 20 seconds, press PTY SEEK START.

• If a station broadcasting the selected program type

is found, the unit stops searching and the Program

Service name appears on the display.

“PTY HOLD” appears on the display.

5 Repeat step 4 until the desired station is located.

If there is no station broadcasting the program type

you select, “NO PTY” appears on the display, then

the Program Service name or frequency appears on

the display.

List of PTY (Program Type)

PTY SEEK MODE

PRESET /

PTY SEEK START

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAU SE

TAPE

REC

/

PAU SE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

PTY

RDS PTY

PTY HOLD

PRESET

NEWS

AFFAIRS

INFO

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP M

ROCK M

M.O.R. M

LIGHT M

CLASSICS

OTHER M

News

Current Affairs

General Information

Sports

Education

Drama

Culture

Science

Light Entertainment

Pops

Rock

Middle of the Road

Music (Easy-listening)

Light Classics

Serious Classics

Other Music

RECEIVING RDS STATIONS

0107CRXE400(M).12-14.E 02.6.13, 7:16 PM13

14

Optional settings for

RDS functions

The tuner has the following functions which make use of

the RDS data service. These are originally in operation

ON. However, you can turn these functions OFF, if so

desired.

1 Select the FM band by pressing TUNER.

2 Press DISPLAY to display the current time.

3 Press FREQ/RDS.

4 Each time you press PTY SEEK MODE the display

will change as follows:

1. CT = CLOCK (ON/OFF)

The tuner corrects the time of the built-in clock

automatically by synchronizing it with the CT

data on the RDS station being received.

• If you receive an RDS station of some other

country, the built-in clock is synchronized with

the time setting of the country.

• If the built-in clock is not yet set for the current

time or reset due to a power failure, etc., it will be

set for the time of the CT data automatically,

whether this setting is ON or OFF.

2. LOCAL = CT (ON/OFF)

If the RDS station being received employs the

local time (summer time, etc.) data service, its

time is displayed in the CT mode.

3. A.M. = RDS (ON/OFF)

RDS stations are searched instead of all FM

stations by the automatic preset tuning operation

when the setting is ON. (Refer to page 11.)

4. RT SPEED: ±0

Changes the scrolling speed of the radio text

decreasing the value and, in turn, reducing the

speed.

Control Range: ±0 to ±3 (Preset value: ±0)

5 Choose the function ON or OFF by pressing PTY

SEEK START, confirming it in the display. Press

PTY SEEK START repeatedly to change the value

for RT SPEED.

• If there is no operation for about 20 seconds, this

mode is cancelled and turns into the frequency

display. If the station has PS data, it turns into the

PS mode.

6 Press FREQ/RDS again to restore the frequency

display mode.

PTY SEEK MODE

PTY SEEK STARTFREQ/RDS

TUNER

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAUSE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

DISPLAY

RECEIVING RDS STATIONS

0107CRXE400(M).12-14.E 02.6.13, 7:16 PM14

15

English

USING THE BUILT-IN TIMER

Timer play and recording

By using the built-in timer, you can have the unit turn on

at a specified time and begin playing or recording

automatically. You can also specify the turn off time.

3. Timer REC

Select the recording component by turning

INPUT. If you like to enjoy timer play with

TUNER or AUX, select “REC Mode OFF”.

4. ON Time

“ON Time” appears on the display for a second,

and changed to the time setting mode.

Press HOUR to set the hour.

Press MIN to set the minute.

5. OFF Time

Set the time the same way as above.

If you set the ON time but not OFF time, the timer

play or recording will finish automatically after an

hour.

Notes

• The display mode will change in about 8 seconds. If the

mode is changed before the setting is completed, call the

mode again by pressing DISPLAY once or more.

• If you select the input other than TUNER and AUX on

“2. Timer Input”, “3. Timer REC” is skipped.

2 Press TIMER to complete the timer setting.

The system is put in the standby mode.

• TIMER indicator lights up.

If you continue using the system, press STANDBY/

ON to turn on this unit.

To cancel the timer play setting

Press DISPLAY to show the current time, then press

TIMER so that “TIMER” goes off from the display. You

can also cancel by pressing TIMER in standby mode.

Note

• In the event of a power failure or when the AC power cord is

disconnected for more than five minutes, you must reset the

clock.

1 Press DISPLAY.

Whenever DISPLAY is pressed, the display mode

changes as follows:

1. Clock Time (TIMER on/off mode)

If you have not set the clock yet “Set Clock”

appears. You need to set the current time as

described on page 6.

2. Timer Input

Select the source to be played by turning INPUT.

• Timer recording is possible only when you

select TUNER or AUX.

MIN

INPUT

DISPLAY

HOUR

TIMER

Before using the timer

If you want to use the cassette deck, KX-E300 or the MD

Recorder, MDX-E300 for timer play or recording, you

must first make the connections as shown in “Connecting

the system” on page 5. For details, refer to the instructions

supplied with the MDX-E300 or KX-E300.

(Example)

BALANCE

INPUT

VOLUME

L

R

TREBLEBASS

PHONES

STANDBY/ON

TIMER

DISPLAY MEMORY

NATURAL SOUND

STEREO RECEIVER

RX–E400

AUTO/MAN'L

PRESET/BAND

TIMER HOUR MIN

MIN MAX

PRESET/TUNING

TIMER ADJ

+– +–

USING THE BUILT-IN TIMER

0108CRXE400(M).15-16.E 02.6.13, 7:17 PM15

16

Sleep timer

The unit can be turned off automatically at a selected

SLEEP time.

1 Play the desired sound source.

2 Press SLEEP repeatedly until the desired sleep time

appears in the display. Each time you press SLEEP,

the sleep time changes as follows:

About 4 seconds after setting, the normal display will

resume.

•“SLEEP” will appear in the display.

3 The unit will turn off automatically when the selected

sleep time is reached.

SLEEP

SLEEP 2h00m

SLEEP 1h30m

SLEEP 1h00m

SLEEP 0h30m

SLEEP OFF

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAU SE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

USING THE BUILT-IN TIMER

0108CRXE400(M).15-16.E 02.6.13, 7:17 PM16

17

CDX-E400 NAMES OF BUTTONS AND CONTROLS

English

Display

6 RANDOM indicator (P.20)

7 PROGRAM indicator (P.21)

8 REPEAT S/F (Single or Full) indicator (P.21)

9 CD-TEXT indicator (P.20)

Front panel

1 STANDBY/ON (P.19)

2 Disc tray (P.19)

3 (Open/Close) (P.19)

4 & (Stop) (P.19)

1 Multi-information Display

2 * Pause indicator

3 # Play indicator

4 A B Tape side indicator (P.25)

5 Music calendar

5 ^ (Play/Pause) (P.19)

6 Display (this page)

7 $/! (Skip/Search Backward)

⁄/› (Skip/Search Forward) (P.19)

STANDBY/ON

NATURAL SOUND COMPACT DISC PLAYER CDX–E400

//

2345

1

7

6

F

12345678910

11 12 13 14 15 16 17 18 19 20

SPACE

PROGRAM RANDOM

SREPEAT

TITLE ARTIST TRACK CD–TEXT

AB

876 5 4

1239

0109CRXE400(M).17-18.E 02.6.13, 7:17 PM17

18

CDX-E400 NAMES OF BUTTONS AND CONTROLS

Remote control

1 Numeric buttons (P.19)

• +100 button is used when operating

MDX-E300.

2 REP (Repeat) (P.21)

3 RANDOM (Random) (P.20)

4 PROG (Program) (P.21)

5 TEXT/TIME (P.20)

6 ^ (Play/Pause) (P.19)

7 & (Stop) (P.19)

8 $ ! (Skip/Seach Backward) (P.19)

9 ⁄ › (Skip/Seach Forward) (P.19)

0 CD input (P.19)

POWER

1 2 3

123

4 5 6

456

7 8 9

78

0 +10 +100

FREQ

/

RDS MODE

–

PTY SEEK

–

START

REP

RANDOM

PROG

ABC

TEXT

/

TIME

R. TIME

DE

TAPE

DIRECTION

PRESET

TUNER

PRESET

MD CD TAPE

AUX

MD

REC

/

PAUSE

TAPE

REC

/

PAUSE

MODE

SLEEP

DISPLAY

DUBBING

VOLUME

START

1

24

6

3

5

7

89

0

0109CRXE400(M).17-18.E 02.6.13, 7:17 PM18

Page is loading ...

Yamaha CRX-E400 Owner's manual

Related papers

Other documents